Console Output
Skipping 243 KB..
Full Logo31JyiS/ae2DeUDesgwAq4oneieS1AAAAzB+LCAAAAAAAAP9b85aBtbiIQSOjNKU4P0+vIKc0PTOvWK8kMze1uCQxtyC1SC8ExvbLL0llgABGJgYmLwaB3MycnMzi4My85FTXgvzkDB8G3tScxILi1BRfsEwJg4BPVmJZon5OYl66vk9+Xrp1RRGDFNSy5Py84vycVD1nCI1qPENFAZBu4xB9Wg50Hx/IFD2QKXpgU7qfTDjTr3yfiYHRi4G1LDGnNBVorgBCkV9pblJqUduaqbLcUx50Q00DAhbv+wAgKef58gAAAA==[0m#19 13.54 cmake-data libarchive13 libicu67 libjsoncpp24 librhash0 libuv1 libxml2 xxd
13:48:18 #19 13.55 Suggested packages:
13:48:18 #19 13.55 cmake-doc ninja-build lrzip
13:48:18 #19 13.55 Recommended packages:
13:48:18 #19 13.55 vim | vim-gtk3 | vim-athena | vim-nox | vim-tiny
13:48:18 #19 13.97 The following NEW packages will be installed:
13:48:18 #19 13.98 cmake cmake-data libarchive13 libicu67 libjsoncpp24 librhash0 libuv1 libxml2
13:48:18 #19 13.98 vim-common xxd
13:48:18 #19 14.31 0 upgraded, 10 newly installed, 0 to remove and 6 not upgraded.
13:48:18 #19 14.31 Need to get 17.7 MB of archives.
13:48:18 #19 14.31 After this operation, 70.7 MB of additional disk space will be used.
13:48:18 #19 14.31 Get:1 http://deb.debian.org/debian bullseye/main amd64 xxd amd64 2:8.2.2434-3+deb11u1 [192 kB]
13:48:18 #19 14.33 Get:2 http://deb.debian.org/debian bullseye/main amd64 vim-common all 2:8.2.2434-3+deb11u1 [226 kB]
13:48:18 #19 14.34 Get:3 http://deb.debian.org/debian bullseye/main amd64 cmake-data all 3.18.4-2+deb11u1 [1725 kB]
13:48:18 #19 14.39 Get:4 http://deb.debian.org/debian bullseye/main amd64 libicu67 amd64 67.1-7 [8622 kB]
13:48:18 #19 14.81 Get:5 http://deb.debian.org/debian bullseye/main amd64 libxml2 amd64 2.9.10+dfsg-6.7+deb11u3 [693 kB]
13:48:18 #19 14.85 Get:6 http://deb.debian.org/debian bullseye/main amd64 libarchive13 amd64 3.4.3-2+deb11u1 [343 kB]
13:48:18 #19 14.85 Get:7 http://deb.debian.org/debian bullseye/main amd64 libjsoncpp24 amd64 1.9.4-4 [78.9 kB]
13:48:18 #19 14.85 Get:8 http://deb.debian.org/debian bullseye/main amd64 librhash0 amd64 1.4.1-2 [129 kB]
13:48:18 #19 14.86 Get:9 http://deb.debian.org/debian bullseye/main amd64 libuv1 amd64 1.40.0-2 [132 kB]
13:48:18 #19 14.87 Get:10 http://deb.debian.org/debian bullseye/main amd64 cmake amd64 3.18.4-2+deb11u1 [5593 kB]
13:48:18 #19 15.62 debconf: delaying package configuration, since apt-utils is not installed
13:48:18 #19 15.76 Fetched 17.7 MB in 1s (18.0 MB/s)
13:48:18 #19 15.81 Selecting previously unselected package xxd.
13:48:18 #19 15.81 (Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 15718 files and directories currently installed.)
13:48:18 #19 15.82 Preparing to unpack .../0-xxd_2%3a8.2.2434-3+deb11u1_amd64.deb ...
13:48:18 #19 16.02 Unpacking xxd (2:8.2.2434-3+deb11u1) ...
13:48:18 #19 16.13 Selecting previously unselected package vim-common.
13:48:18 #19 16.14 Preparing to unpack .../1-vim-common_2%3a8.2.2434-3+deb11u1_all.deb ...
13:48:18 #19 16.16 Unpacking vim-common (2:8.2.2434-3+deb11u1) ...
13:48:18 #19 16.29 Selecting previously unselected package cmake-data.
13:48:18 #19 16.29 Preparing to unpack .../2-cmake-data_3.18.4-2+deb11u1_all.deb ...
13:48:18 #19 16.30 Unpacking cmake-data (3.18.4-2+deb11u1) ...
13:48:18 #19 18.18 Selecting previously unselected package libicu67:amd64.
13:48:18 #19 18.18 Preparing to unpack .../3-libicu67_67.1-7_amd64.deb ...
13:48:18 #19 18.22 Unpacking libicu67:amd64 (67.1-7) ...
13:48:18 #19 21.13 Selecting previously unselected package libxml2:amd64.
13:48:18 #19 21.13 Preparing to unpack .../4-libxml2_2.9.10+dfsg-6.7+deb11u3_amd64.deb ...
13:48:18 #19 21.13 Unpacking libxml2:amd64 (2.9.10+dfsg-6.7+deb11u3) ...
13:48:18 #19 21.40 Selecting previously unselected package libarchive13:amd64.
13:48:18 #19 21.40 Preparing to unpack .../5-libarchive13_3.4.3-2+deb11u1_amd64.deb ...
13:48:18 #19 21.41 Unpacking libarchive13:amd64 (3.4.3-2+deb11u1) ...
13:48:18 #19 21.57 Selecting previously unselected package libjsoncpp24:amd64.
13:48:18 #19 21.57 Preparing to unpack .../6-libjsoncpp24_1.9.4-4_amd64.deb ...
13:48:18 #19 21.58 Unpacking libjsoncpp24:amd64 (1.9.4-4) ...
13:48:18 #19 21.66 Selecting previously unselected package librhash0:amd64.
13:48:18 #19 21.67 Preparing to unpack .../7-librhash0_1.4.1-2_amd64.deb ...
13:48:18 #19 21.67 Unpacking librhash0:amd64 (1.4.1-2) ...
13:48:18 #19 21.75 Selecting previously unselected package libuv1:amd64.
13:48:18 #19 21.76 Preparing to unpack .../8-libuv1_1.40.0-2_amd64.deb ...
13:48:18 #19 21.77 Unpacking libuv1:amd64 (1.40.0-2) ...
13:48:18 #19 21.87 Selecting previously unselected package cmake.
13:48:18 #19 21.88 Preparing to unpack .../9-cmake_3.18.4-2+deb11u1_amd64.deb ...
13:48:18 #19 21.88 Unpacking cmake (3.18.4-2+deb11u1) ...
13:48:19 #19 23.45 Setting up libicu67:amd64 (67.1-7) ...
13:48:19 #19 23.47 Setting up xxd (2:8.2.2434-3+deb11u1) ...
13:48:19 #19 23.48 Setting up libuv1:amd64 (1.40.0-2) ...
13:48:19 #19 ...
13:48:19
13:48:19 #21 [runtime-dev-cross-false 1/1] RUN --mount=type=cache,sharing=locked,id=moby-cross-false-aptlib,target=/var/lib/apt --mount=type=cache,sharing=locked,id=moby-cross-false-aptcache,target=/var/cache/apt apt-get update && apt-get install -y --no-install-recommends binutils-mingw-w64 g++-mingw-w64-x86-64 libapparmor-dev libbtrfs-dev libdevmapper-dev libseccomp-dev libsystemd-dev libudev-dev
13:48:19 #21 23.41 Selecting previously unselected package mingw-w64-x86-64-dev.
13:48:19 #21 23.42 Preparing to unpack .../06-mingw-w64-x86-64-dev_8.0.0-1_all.deb ...
13:48:19 #21 23.42 Unpacking mingw-w64-x86-64-dev (8.0.0-1) ...
13:48:20 #21 ...
13:48:20
13:48:20 #19 [tini 1/2] RUN --mount=type=cache,sharing=locked,id=moby-tini-aptlib,target=/var/lib/apt --mount=type=cache,sharing=locked,id=moby-tini-aptcache,target=/var/cache/apt apt-get update && apt-get install -y --no-install-recommends cmake vim-common
13:48:20 #19 23.49 Setting up vim-common (2:8.2.2434-3+deb11u1) ...
13:48:20 #19 23.53 Setting up libjsoncpp24:amd64 (1.9.4-4) ...
13:48:20 #19 23.55 Setting up librhash0:amd64 (1.4.1-2) ...
13:48:20 #19 23.56 Setting up cmake-data (3.18.4-2+deb11u1) ...
13:48:20 #19 23.58 Setting up libxml2:amd64 (2.9.10+dfsg-6.7+deb11u3) ...
13:48:20 #19 23.59 Setting up libarchive13:amd64 (3.4.3-2+deb11u1) ...
13:48:20 #19 23.61 Setting up cmake (3.18.4-2+deb11u1) ...
13:48:20 #19 23.62 Processing triggers for libc-bin (2.31-13+deb11u5) ...
13:48:20 #19 DONE 24.1s
13:48:20
13:48:20 #23 [tini 2/2] RUN --mount=type=cache,target=/root/.cache/go-build --mount=type=cache,target=/go/pkg/mod --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install PREFIX=/build /tmp/install/install.sh tini
13:48:21 #23 1.439 + RM_GOPATH=0
13:48:21 #23 1.439 + TMP_GOPATH=
13:48:21 #23 1.439 + : /build
13:48:21 #23 1.439 + '[' -z '' ']'
13:48:21 #23 1.439 ++ mktemp -d
13:48:21 #23 1.440 + export GOPATH=/tmp/tmp.8yu8O9TGjK
13:48:21 #23 1.440 + GOPATH=/tmp/tmp.8yu8O9TGjK
13:48:21 #23 1.441 + RM_GOPATH=1
13:48:21 #23 1.441 + case "$(go env GOARCH)" in
13:48:21 #23 1.444 ++ go env GOARCH
13:48:21 #23 1.454 + export GO_BUILDMODE=-buildmode=pie
13:48:21 #23 1.454 + GO_BUILDMODE=-buildmode=pie
13:48:21 #23 1.455 ++ dirname /tmp/install/install.sh
13:48:21 #23 1.456 + dir=/tmp/install
13:48:21 #23 1.460 + bin=tini
13:48:21 #23 1.460 + shift
13:48:21 #23 1.460 + '[' '!' -f /tmp/install/tini.installer ']'
13:48:21 #23 1.460 + . /tmp/install/tini.installer
13:48:21 #23 1.460 ++ : v0.19.0
13:48:21 #23 1.460 + install_tini
13:48:21 #23 1.461 Install tini version v0.19.0
13:48:21 #23 1.461 + echo 'Install tini version v0.19.0'
13:48:21 #23 1.461 + git clone https://github.com/krallin/tini.git /tmp/tmp.8yu8O9TGjK/tini
13:48:21 #23 1.462 Cloning into '/tmp/tmp.8yu8O9TGjK/tini'...
13:48:22 #23 1.913 + cd /tmp/tmp.8yu8O9TGjK/tini
13:48:22 #23 1.913 + git checkout -q v0.19.0
13:48:22 #23 1.925 + cmake .
13:48:22 #23 2.174 -- The C compiler identification is GNU 10.2.1
13:48:22 #23 2.220 -- Detecting C compiler ABI info
13:48:22 #23 2.557 -- Detecting C compiler ABI info - done
13:48:22 #23 2.613 -- Check for working C compiler: /usr/bin/cc - skipped
13:48:22 #23 2.620 -- Detecting C compile features
13:48:22 #23 2.622 -- Detecting C compile features - done
13:48:22 #23 2.642 -- Performing Test HAS_BUILTIN_FORTIFY
13:48:22 #23 2.735 -- Performing Test HAS_BUILTIN_FORTIFY - Failed
13:48:23 #23 2.777 -- Configuring done
13:48:23 #23 2.789 -- Generating done
13:48:23 #23 2.791 -- Build files have been written to: /tmp/tmp.8yu8O9TGjK/tini
13:48:23 #23 2.800 + make tini-static
13:48:23 #23 2.935 Scanning dependencies of target tini-static
13:48:23 #23 2.989 [ 50%] Building C object CMakeFiles/tini-static.dir/src/tini.c.o
13:48:23 #23 3.563 [100%] Linking C executable tini-static
13:48:24 #23 3.841 [100%] Built target tini-static
13:48:24 #23 3.869 + mkdir -p /build
13:48:24 #23 3.870 + cp tini-static /build/docker-init
13:48:24 #23 DONE 4.2s
13:48:24
13:48:24 #21 [runtime-dev-cross-false 1/1] RUN --mount=type=cache,sharing=locked,id=moby-cross-false-aptlib,target=/var/lib/apt --mount=type=cache,sharing=locked,id=moby-cross-false-aptcache,target=/var/cache/apt apt-get update && apt-get install -y --no-install-recommends binutils-mingw-w64 g++-mingw-w64-x86-64 libapparmor-dev libbtrfs-dev libdevmapper-dev libseccomp-dev libsystemd-dev libudev-dev
13:48:24 #21 26.15 Selecting previously unselected package gcc-mingw-w64-base.
13:48:24 #21 26.15 Preparing to unpack .../07-gcc-mingw-w64-base_10.2.1-6+24.2_amd64.deb ...
13:48:24 #21 26.16 Unpacking gcc-mingw-w64-base (10.2.1-6+24.2) ...
13:48:24 #21 26.24 Selecting previously unselected package gcc-mingw-w64-x86-64-posix-runtime.
13:48:24 #21 26.24 Preparing to unpack .../08-gcc-mingw-w64-x86-64-posix-runtime_10.2.1-6+24.2_amd64.deb ...
13:48:24 #21 26.25 Unpacking gcc-mingw-w64-x86-64-posix-runtime (10.2.1-6+24.2) ...
13:48:26 #21 29.98 Selecting previously unselected package gcc-mingw-w64-x86-64-posix.
13:48:26 #21 29.98 Preparing to unpack .../09-gcc-mingw-w64-x86-64-posix_10.2.1-6+24.2_amd64.deb ...
13:48:26 #21 29.98 Unpacking gcc-mingw-w64-x86-64-posix (10.2.1-6+24.2) ...
13:48:31 #21 35.40 Selecting previously unselected package g++-mingw-w64-x86-64-posix.
13:48:31 #21 35.41 Preparing to unpack .../10-g++-mingw-w64-x86-64-posix_10.2.1-6+24.2_amd64.deb ...
13:48:31 #21 35.41 Unpacking g++-mingw-w64-x86-64-posix (10.2.1-6+24.2) ...
13:48:34 #21 ...
13:48:34
13:48:34 #22 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build --mount=type=cache,target=/go/pkg/mod --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install PREFIX=/build /tmp/install/install.sh containerd
13:48:34 #22 23.35 Updating files: 91% (4766/5204)
Updating files: 92% (4788/5204)
Updating files: 93% (4840/5204)
Updating files: 94% (4892/5204)
Updating files: 95% (4944/5204)
Updating files: 96% (4996/5204)
Updating files: 97% (5048/5204)
Updating files: 98% (5100/5204)
Updating files: 99% (5152/5204)
Updating files: 100% (5204/5204)
Updating files: 100% (5204/5204), done.
13:48:34 #22 23.51 + cd /tmp/tmp.hurx9PL75D/src/github.com/containerd/containerd
13:48:34 #22 23.51 + git checkout -q v1.6.16
13:48:35 #22 25.05 + export 'BUILDTAGS=netgo osusergo static_build'
13:48:35 #22 25.05 + BUILDTAGS='netgo osusergo static_build'
13:48:35 #22 25.05 + export EXTRA_FLAGS=-buildmode=pie
13:48:35 #22 25.05 + EXTRA_FLAGS=-buildmode=pie
13:48:35 #22 25.05 + export 'EXTRA_LDFLAGS=-extldflags "-fno-PIC -static"'
13:48:35 #22 25.05 + EXTRA_LDFLAGS='-extldflags "-fno-PIC -static"'
13:48:35 #22 25.05 + '[' '' = dynamic ']'
13:48:35 #22 25.05 + make
13:48:37 #22 26.24 + bin/ctr
13:48:45 #22 ...
13:48:45
13:48:45 #21 [runtime-dev-cross-false 1/1] RUN --mount=type=cache,sharing=locked,id=moby-cross-false-aptlib,target=/var/lib/apt --mount=type=cache,sharing=locked,id=moby-cross-false-aptcache,target=/var/cache/apt apt-get update && apt-get install -y --no-install-recommends binutils-mingw-w64 g++-mingw-w64-x86-64 libapparmor-dev libbtrfs-dev libdevmapper-dev libseccomp-dev libsystemd-dev libudev-dev
13:48:45 #21 37.86 Selecting previously unselected package gcc-mingw-w64-x86-64-win32-runtime.
13:48:45 #21 37.87 Preparing to unpack .../11-gcc-mingw-w64-x86-64-win32-runtime_10.2.1-6+24.2_amd64.deb ...
13:48:45 #21 37.87 Unpacking gcc-mingw-w64-x86-64-win32-runtime (10.2.1-6+24.2) ...
13:48:45 #21 40.48 Selecting previously unselected package gcc-mingw-w64-x86-64-win32.
13:48:45 #21 40.48 Preparing to unpack .../12-gcc-mingw-w64-x86-64-win32_10.2.1-6+24.2_amd64.deb ...
13:48:45 #21 40.49 Unpacking gcc-mingw-w64-x86-64-win32 (10.2.1-6+24.2) ...
13:48:45 #21 45.95 Selecting previously unselected package g++-mingw-w64-x86-64-win32.
13:48:45 #21 45.95 Preparing to unpack .../13-g++-mingw-w64-x86-64-win32_10.2.1-6+24.2_amd64.deb ...
13:48:45 #21 45.95 Unpacking g++-mingw-w64-x86-64-win32 (10.2.1-6+24.2) ...
13:48:45 #21 ...
13:48:45
13:48:45 #18 [rootlesskit 1/3] RUN --mount=type=cache,target=/root/.cache/go-build --mount=type=cache,target=/go/pkg/mod --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install PREFIX=/build /tmp/install/install.sh rootlesskit
13:48:45 #18 47.92 + for f in rootlesskit rootlesskit-docker-proxy
13:48:45 #18 47.92 + GOBIN=/build
13:48:45 #18 47.92 + GO111MODULE=on
13:48:45 #18 47.92 + go install -ldflags= github.com/rootless-containers/rootlesskit/cmd/rootlesskit-docker-proxy@v0.14.4
13:48:47 #18 DONE 51.5s
13:48:47
13:48:47 #24 [rootlesskit 2/3] COPY ./contrib/dockerd-rootless.sh /build
13:48:47 #24 DONE 0.1s
13:48:47
13:48:47 #21 [runtime-dev-cross-false 1/1] RUN --mount=type=cache,sharing=locked,id=moby-cross-false-aptlib,target=/var/lib/apt --mount=type=cache,sharing=locked,id=moby-cross-false-aptcache,target=/var/cache/apt apt-get update && apt-get install -y --no-install-recommends binutils-mingw-w64 g++-mingw-w64-x86-64 libapparmor-dev libbtrfs-dev libdevmapper-dev libseccomp-dev libsystemd-dev libudev-dev
13:48:47 #21 48.34 Selecting previously unselected package g++-mingw-w64-x86-64.
13:48:47 #21 48.34 Preparing to unpack .../14-g++-mingw-w64-x86-64_10.2.1-6+24.2_all.deb ...
13:48:47 #21 48.36 Unpacking g++-mingw-w64-x86-64 (10.2.1-6+24.2) ...
13:48:47 #21 48.42 Selecting previously unselected package libapparmor1:amd64.
13:48:47 #21 48.42 Preparing to unpack .../15-libapparmor1_2.13.6-10_amd64.deb ...
13:48:47 #21 48.42 Unpacking libapparmor1:amd64 (2.13.6-10) ...
13:48:47 #21 48.50 Selecting previously unselected package libapparmor-dev:amd64.
13:48:47 #21 48.50 Preparing to unpack .../16-libapparmor-dev_2.13.6-10_amd64.deb ...
13:48:47 #21 48.51 Unpacking libapparmor-dev:amd64 (2.13.6-10) ...
13:48:47 #21 48.60 Selecting previously unselected package libbtrfs0:amd64.
13:48:47 #21 48.61 Preparing to unpack .../17-libbtrfs0_5.10.1-2_amd64.deb ...
13:48:47 #21 48.62 Unpacking libbtrfs0:amd64 (5.10.1-2) ...
13:48:47 #21 48.70 Selecting previously unselected package libbtrfs-dev:amd64.
13:48:47 #21 48.71 Preparing to unpack .../18-libbtrfs-dev_5.10.1-2_amd64.deb ...
13:48:47 #21 48.72 Unpacking libbtrfs-dev:amd64 (5.10.1-2) ...
13:48:47 #21 48.82 Selecting previously unselected package libdevmapper-event1.02.1:amd64.
13:48:47 #21 48.82 Preparing to unpack .../19-libdevmapper-event1.02.1_2%3a1.02.175-2.1_amd64.deb ...
13:48:47 #21 48.83 Unpacking libdevmapper-event1.02.1:amd64 (2:1.02.175-2.1) ...
13:48:47 #21 48.87 Selecting previously unselected package libudev-dev:amd64.
13:48:47 #21 48.88 Preparing to unpack .../20-libudev-dev_247.3-7+deb11u1_amd64.deb ...
13:48:47 #21 48.88 Unpacking libudev-dev:amd64 (247.3-7+deb11u1) ...
13:48:47 #21 48.96 Selecting previously unselected package libsepol1-dev:amd64.
13:48:47 #21 48.96 Preparing to unpack .../21-libsepol1-dev_3.1-1_amd64.deb ...
13:48:47 #21 48.96 Unpacking libsepol1-dev:amd64 (3.1-1) ...
13:48:47 #21 49.12 Selecting previously unselected package libpcre2-16-0:amd64.
13:48:47 #21 49.12 Preparing to unpack .../22-libpcre2-16-0_10.36-2+deb11u1_amd64.deb ...
13:48:47 #21 49.13 Unpacking libpcre2-16-0:amd64 (10.36-2+deb11u1) ...
13:48:47 #21 49.22 Selecting previously unselected package libpcre2-32-0:amd64.
13:48:47 #21 49.23 Preparing to unpack .../23-libpcre2-32-0_10.36-2+deb11u1_amd64.deb ...
13:48:47 #21 49.24 Unpacking libpcre2-32-0:amd64 (10.36-2+deb11u1) ...
13:48:47 #21 49.33 Selecting previously unselected package libpcre2-posix2:amd64.
13:48:47 #21 49.33 Preparing to unpack .../24-libpcre2-posix2_10.36-2+deb11u1_amd64.deb ...
13:48:47 #21 49.33 Unpacking libpcre2-posix2:amd64 (10.36-2+deb11u1) ...
13:48:47 #21 49.38 Selecting previously unselected package libpcre2-dev:amd64.
13:48:47 #21 49.39 Preparing to unpack .../25-libpcre2-dev_10.36-2+deb11u1_amd64.deb ...
13:48:47 #21 49.40 Unpacking libpcre2-dev:amd64 (10.36-2+deb11u1) ...
13:48:47 #21 49.56 Selecting previously unselected package libselinux1-dev:amd64.
13:48:47 #21 49.57 Preparing to unpack .../26-libselinux1-dev_3.1-3_amd64.deb ...
13:48:47 #21 49.57 Unpacking libselinux1-dev:amd64 (3.1-3) ...
13:48:47 #21 49.70 Selecting previously unselected package libdevmapper-dev:amd64.
13:48:47 #21 49.70 Preparing to unpack .../27-libdevmapper-dev_2%3a1.02.175-2.1_amd64.deb ...
13:48:47 #21 49.70 Unpacking libdevmapper-dev:amd64 (2:1.02.175-2.1) ...
13:48:47 #21 49.76 Selecting previously unselected package libseccomp-dev:amd64.
13:48:47 #21 49.76 Preparing to unpack .../28-libseccomp-dev_2.5.1-1+deb11u1_amd64.deb ...
13:48:47 #21 49.77 Unpacking libseccomp-dev:amd64 (2.5.1-1+deb11u1) ...
13:48:47 #21 49.85 Selecting previously unselected package libsystemd-dev:amd64.
13:48:47 #21 49.86 Preparing to unpack .../29-libsystemd-dev_247.3-7+deb11u1_amd64.deb ...
13:48:47 #21 49.87 Unpacking libsystemd-dev:amd64 (247.3-7+deb11u1) ...
13:48:47 #21 50.16 Setting up libseccomp-dev:amd64 (2.5.1-1+deb11u1) ...
13:48:47 #21 50.18 Setting up libapparmor1:amd64 (2.13.6-10) ...
13:48:47 #21 50.19 Setting up binutils-mingw-w64-x86-64 (2.35.2-2+8.11+b3) ...
13:48:47 #21 50.20 Setting up libsepol1-dev:amd64 (3.1-1) ...
13:48:47 #21 50.21 Setting up gcc-mingw-w64-base (10.2.1-6+24.2) ...
13:48:47 #21 50.23 Setting up libpcre2-16-0:amd64 (10.36-2+deb11u1) ...
13:48:47 #21 50.24 Setting up libbtrfs0:amd64 (5.10.1-2) ...
13:48:47 #21 50.25 Setting up libpcre2-32-0:amd64 (10.36-2+deb11u1) ...
13:48:47 #21 50.27 Setting up libudev-dev:amd64 (247.3-7+deb11u1) ...
13:48:47 #21 50.28 Setting up libpcre2-posix2:amd64 (10.36-2+deb11u1) ...
13:48:47 #21 50.29 Setting up binutils-mingw-w64-i686 (2.35.2-2+8.11+b3) ...
13:48:47 #21 50.31 Setting up libbtrfs-dev:amd64 (5.10.1-2) ...
13:48:47 #21 50.32 Setting up gcc-mingw-w64-x86-64-win32-runtime (10.2.1-6+24.2) ...
13:48:47 #21 50.33 Setting up libapparmor-dev:amd64 (2.13.6-10) ...
13:48:47 #21 50.34 Setting up mingw-w64-common (8.0.0-1) ...
13:48:47 #21 50.36 Setting up libsystemd-dev:amd64 (247.3-7+deb11u1) ...
13:48:47 #21 50.38 Setting up mingw-w64-x86-64-dev (8.0.0-1) ...
13:48:47 #21 50.45 Setting up libpcre2-dev:amd64 (10.36-2+deb11u1) ...
13:48:47 #21 50.52 Setting up libselinux1-dev:amd64 (3.1-3) ...
13:48:47 #21 50.56 Setting up gcc-mingw-w64-x86-64-posix-runtime (10.2.1-6+24.2) ...
13:48:47 #21 50.59 Setting up gcc-mingw-w64-x86-64-posix (10.2.1-6+24.2) ...
13:48:47 #21 50.61 update-alternatives: using /usr/bin/x86_64-w64-mingw32-gcc-posix to provide /usr/bin/x86_64-w64-mingw32-gcc (x86_64-w64-mingw32-gcc) in auto mode
13:48:47 #21 50.63 Setting up gcc-mingw-w64-x86-64-win32 (10.2.1-6+24.2) ...
13:48:47 #21 50.65 update-alternatives: using /usr/bin/x86_64-w64-mingw32-gcc-win32 to provide /usr/bin/x86_64-w64-mingw32-gcc (x86_64-w64-mingw32-gcc) in auto mode
13:48:47 #21 50.67 Setting up binutils-mingw-w64 (2.35-2+8.11) ...
13:48:47 #21 50.85 Setting up g++-mingw-w64-x86-64-win32 (10.2.1-6+24.2) ...
13:48:47 #21 50.98 update-alternatives: using /usr/bin/x86_64-w64-mingw32-g++-win32 to provide /usr/bin/x86_64-w64-mingw32-g++ (x86_64-w64-mingw32-g++) in auto mode
13:48:47 #21 51.00 Setting up g++-mingw-w64-x86-64-posix (10.2.1-6+24.2) ...
13:48:47 #21 51.13 Setting up g++-mingw-w64-x86-64 (10.2.1-6+24.2) ...
13:48:47 #21 51.23 Setting up libdevmapper1.02.1:amd64 (2:1.02.175-2.1) ...
13:48:47 #21 51.34 Setting up dmsetup (2:1.02.175-2.1) ...
13:48:47 #21 51.44 Setting up libdevmapper-event1.02.1:amd64 (2:1.02.175-2.1) ...
13:48:47 #21 51.47 Setting up libdevmapper-dev:amd64 (2:1.02.175-2.1) ...
13:48:47 #21 51.48 Processing triggers for libc-bin (2.31-13+deb11u5) ...
13:48:47 #21 ...
13:48:47
13:48:47 #25 [rootlesskit 3/3] COPY ./contrib/dockerd-rootless-setuptool.sh /build
13:48:47 #25 DONE 0.1s
13:48:48
13:48:48 #21 [runtime-dev-cross-false 1/1] RUN --mount=type=cache,sharing=locked,id=moby-cross-false-aptlib,target=/var/lib/apt --mount=type=cache,sharing=locked,id=moby-cross-false-aptcache,target=/var/cache/apt apt-get update && apt-get install -y --no-install-recommends binutils-mingw-w64 g++-mingw-w64-x86-64 libapparmor-dev libbtrfs-dev libdevmapper-dev libseccomp-dev libsystemd-dev libudev-dev
13:48:48 #21 DONE 51.9s
13:48:48
13:48:48 #26 [binary-base 1/7] COPY --from=tini /build/ /usr/local/bin/
13:48:48 #26 DONE 0.2s
13:48:48
13:48:48 #27 [runc 1/1] RUN --mount=type=cache,target=/root/.cache/go-build --mount=type=cache,target=/go/pkg/mod --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install PREFIX=/build /tmp/install/install.sh runc
13:48:49 #27 1.038 + RM_GOPATH=0
13:48:49 #27 1.038 + TMP_GOPATH=
13:48:49 #27 1.038 + : /build
13:48:49 #27 1.038 + '[' -z '' ']'
13:48:49 #27 1.038 ++ mktemp -d
13:48:49 #27 1.040 + export GOPATH=/tmp/tmp.dKSwLn3RgL
13:48:49 #27 1.040 + GOPATH=/tmp/tmp.dKSwLn3RgL
13:48:49 #27 1.040 + RM_GOPATH=1
13:48:49 #27 1.040 + case "$(go env GOARCH)" in
13:48:49 #27 1.045 ++ go env GOARCH
13:48:49 #27 1.050 + export GO_BUILDMODE=-buildmode=pie
13:48:49 #27 1.050 + GO_BUILDMODE=-buildmode=pie
13:48:49 #27 1.050 ++ dirname /tmp/install/install.sh
13:48:49 #27 1.059 + dir=/tmp/install
13:48:49 #27 1.059 + bin=runc
13:48:49 #27 1.059 + shift
13:48:49 #27 1.059 + '[' '!' -f /tmp/install/runc.installer ']'
13:48:49 #27 1.059 + . /tmp/install/runc.installer
13:48:49 #27 1.059 ++ set -e
13:48:49 #27 1.059 ++ : v1.1.4
13:48:49 #27 1.059 + install_runc
13:48:49 #27 1.059 + RUNC_BUILDTAGS=seccomp
13:48:49 #27 1.059 + echo 'Install runc version v1.1.4 (build tags: seccomp)'
13:48:49 #27 1.059 + git clone https://github.com/opencontainers/runc.git /tmp/tmp.dKSwLn3RgL/src/github.com/opencontainers/runc
13:48:49 #27 1.059 Cloning into '/tmp/tmp.dKSwLn3RgL/src/github.com/opencontainers/runc'...
13:48:49 #27 1.059 Install runc version v1.1.4 (build tags: seccomp)
13:48:53 #27 4.626 + cd /tmp/tmp.dKSwLn3RgL/src/github.com/opencontainers/runc
13:48:53 #27 4.626 + git checkout -q v1.1.4
13:48:53 #27 4.852 + '[' -z '' ']'
13:48:53 #27 4.852 + target=static
13:48:53 #27 4.852 + make BUILDTAGS=seccomp static
13:48:53 #27 5.095 CGO_ENABLED=1 go build -trimpath -tags "seccomp netgo osusergo" -ldflags "-extldflags -static -X main.gitCommit=v1.1.4-0-g5fd4c4d1 -X main.version=1.1.4 " -o runc .
13:50:00 #27 73.03 + mkdir -p /build
13:50:00 #27 73.03 + cp runc /build/runc
13:50:01 #27 DONE 73.4s
13:50:01
13:50:01 #22 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build --mount=type=cache,target=/go/pkg/mod --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install PREFIX=/build /tmp/install/install.sh containerd
13:50:02 #22 ...
13:50:02
13:50:02 #28 [binary-base 2/7] COPY --from=runc /build/ /usr/local/bin/
13:50:02 #28 DONE 0.1s
13:50:02
13:50:02 #22 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build --mount=type=cache,target=/go/pkg/mod --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install PREFIX=/build /tmp/install/install.sh containerd
13:50:17 #22 126.4 + bin/containerd
13:51:14 #22 182.8 # github.com/containerd/containerd/cmd/containerd
13:51:14 #22 182.8 /usr/bin/ld: /tmp/go-link-783385664/000019.o: in function `New':
13:51:14 #22 182.8 /tmp/tmp.hurx9PL75D/src/github.com/containerd/containerd/vendor/github.com/miekg/pkcs11/pkcs11.go:77: warning: Using 'dlopen' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
13:51:14 #22 182.9 + bin/containerd-stress
13:51:14 #22 184.2 + bin/containerd-shim
13:51:27 #22 196.5 + bin/containerd-shim-runc-v1
13:51:35 #22 203.4 + bin/containerd-shim-runc-v2
13:51:35 #22 204.3 + binaries
13:51:35 #22 204.3 + install -D bin/containerd /build/containerd
13:51:35 #22 204.4 + install -D bin/containerd-shim /build/containerd-shim
13:51:35 #22 204.4 + install -D bin/containerd-shim-runc-v2 /build/containerd-shim-runc-v2
13:51:35 #22 204.4 + install -D bin/ctr /build/ctr
13:51:35 #22 DONE 205.4s
13:51:36
13:51:36 #29 [binary-base 3/7] COPY --from=containerd /build/ /usr/local/bin/
13:51:37 #29 DONE 0.2s
13:51:37
13:51:37 #30 [binary-base 4/7] COPY --from=rootlesskit /build/ /usr/local/bin/
13:51:37 #30 DONE 0.1s
13:51:37
13:51:37 #31 [binary-base 5/7] COPY --from=proxy /build/ /usr/local/bin/
13:51:37 #31 DONE 0.1s
13:51:37
13:51:37 #32 [binary-base 6/7] COPY --from=vpnkit /build/ /usr/local/bin/
13:51:37 #32 DONE 0.2s
13:51:37
13:51:37 #33 [binary-base 7/7] WORKDIR /go/src/github.com/docker/docker
13:51:37 #33 DONE 0.1s
13:51:37
13:51:37 #34 [build-binary 1/1] RUN --mount=type=cache,target=/root/.cache/go-build --mount=type=bind,target=/go/src/github.com/docker/docker hack/make.sh binary
13:51:37 #34 0.401
13:51:37 #34 0.463 Removing /build/bundles/
13:51:37 #34 0.465
13:51:37 #34 0.470 ---> Making bundle: binary (in /build/bundles/binary)
13:51:37 #34 0.503 Building: /build/bundles/binary-daemon/dockerd-0.0.0-20230118204216-7155243
13:51:37 #34 0.503 GOOS="" GOARCH="" GOARM=""
13:53:14 #34 90.94 Created binary: /build/bundles/binary-daemon/dockerd-0.0.0-20230118204216-7155243
13:53:14 #34 91.48 Copying nested executables into /build/bundles/binary-daemon
13:53:14 #34 92.80
13:53:14 #34 DONE 93.2s
13:53:14
13:53:14 #35 [binary 1/1] COPY --from=build-binary /build/bundles/ /
13:53:14 #35 DONE 1.2s
13:53:14
13:53:14 #36 exporting to client
13:53:14 #36 copying files 16.26MB 0.1s
13:53:14 #36 copying files 203.85MB 1.6s done
13:53:14 #36 DONE 1.6s
13:53:14 make[2]: Leaving directory '/home/ubuntu/workspace/docker-ce-packaging_20.10/src/github.com/docker/docker'
13:53:14 mkdir -p build/linux/docker
13:53:14 cp /home/ubuntu/workspace/docker-ce-packaging_20.10/src/github.com/docker/cli/build/docker build/linux/docker/
13:53:14 for f in dockerd containerd ctr containerd-shim containerd-shim-runc-v2 docker-init docker-proxy runc; do \
13:53:14 cp -L /home/ubuntu/workspace/docker-ce-packaging_20.10/src/github.com/docker/docker/bundles/binary-daemon/$f build/linux/docker/$f; \
13:53:14 done
13:53:14 tar -C build/linux -c -z -f build/linux/docker-0.0.0-20230118204216-7155243.tgz docker
13:53:26 # extra binaries for running rootless
13:53:26 mkdir -p build/linux/docker-rootless-extras
13:53:26 for f in rootlesskit rootlesskit-docker-proxy dockerd-rootless.sh dockerd-rootless-setuptool.sh vpnkit; do \
13:53:26 if [ -f /home/ubuntu/workspace/docker-ce-packaging_20.10/src/github.com/docker/docker/bundles/binary-daemon/$f ]; then \
13:53:26 cp -L /home/ubuntu/workspace/docker-ce-packaging_20.10/src/github.com/docker/docker/bundles/binary-daemon/$f build/linux/docker-rootless-extras/$f; \
13:53:26 fi \
13:53:26 done
13:53:26 tar -C build/linux -c -z -f build/linux/docker-rootless-extras-0.0.0-20230118204216-7155243.tgz docker-rootless-extras
13:53:28 make[1]: Leaving directory '/home/ubuntu/workspace/docker-ce-packaging_20.10/static'
![[Jenkins]](/public/static/177d139e/images/svgs/logo.svg){kind=logo}
