Console Output
Skipping 248 KB..
Full LoghLoPj6QKXogU/TApnQ/mXCmX/k+EwOjFwNrWWJOaSrQXAGEIr/S3KTUorY1U2W5pzzohpoGBExF1wAfJH+k8gAAAA==[0m#15 15.67 binutils-mingw-w64-i686 binutils-mingw-w64-x86-64 dmsetup gcc-mingw-w64-base
15:49:08 #15 15.67 gcc-mingw-w64-x86-64 libapparmor1 libbtrfs0 libdevmapper-event1.02.1
15:49:08 #15 15.67 libdevmapper1.02.1 libpcre16-3 libpcre3-dev libpcre32-3 libpcrecpp0v5
15:49:08 #15 15.67 libseccomp2 libselinux1-dev libsepol1-dev mingw-w64-common
15:49:08 #15 15.67 mingw-w64-x86-64-dev
15:49:08 #15 15.68 Suggested packages:
15:49:08 #15 15.68 gcc-8-locales seccomp wine64
15:49:08 #15 16.25 The following NEW packages will be installed:
15:49:08 #15 16.25 binutils-mingw-w64 binutils-mingw-w64-i686 binutils-mingw-w64-x86-64 dmsetup
15:49:08 #15 16.25 g++-mingw-w64-x86-64 gcc-mingw-w64-base gcc-mingw-w64-x86-64 libapparmor-dev
15:49:08 #15 16.25 libapparmor1 libbtrfs-dev libbtrfs0 libdevmapper-dev
15:49:08 #15 16.25 libdevmapper-event1.02.1 libdevmapper1.02.1 libpcre16-3 libpcre3-dev
15:49:08 #15 16.25 libpcre32-3 libpcrecpp0v5 libseccomp-dev libselinux1-dev libsepol1-dev
15:49:08 #15 16.25 libsystemd-dev libudev-dev mingw-w64-common mingw-w64-x86-64-dev
15:49:08 #15 16.26 The following packages will be upgraded:
15:49:08 #15 16.26 libseccomp2
15:49:08 #15 16.58 1 upgraded, 25 newly installed, 0 to remove and 2 not upgraded.
15:49:08 #15 16.58 Need to get 77.8 MB of archives.
15:49:08 #15 16.58 After this operation, 487 MB of additional disk space will be used.
15:49:08 #15 16.58 Get:1 http://deb.debian.org/debian buster-backports/main amd64 libseccomp2 amd64 2.5.1-1~bpo10+1 [47.7 kB]
15:49:08 #15 16.59 Get:2 http://deb.debian.org/debian buster/main amd64 binutils-mingw-w64-i686 amd64 2.31.1-11+8.3 [2310 kB]
15:49:08 #15 16.69 Get:3 http://deb.debian.org/debian buster/main amd64 binutils-mingw-w64-x86-64 amd64 2.31.1-11+8.3 [2642 kB]
15:49:08 #15 16.80 Get:4 http://deb.debian.org/debian buster/main amd64 binutils-mingw-w64 all 2.31.1-11+8.3 [138 kB]
15:49:08 #15 16.82 Get:5 http://deb.debian.org/debian buster/main amd64 libdevmapper1.02.1 amd64 2:1.02.155-3 [141 kB]
15:49:08 #15 16.82 Get:6 http://deb.debian.org/debian buster/main amd64 dmsetup amd64 2:1.02.155-3 [90.8 kB]
15:49:08 #15 16.83 Get:7 http://deb.debian.org/debian buster/main amd64 mingw-w64-common all 6.0.0-3 [4910 kB]
15:49:08 #15 17.05 Get:8 http://deb.debian.org/debian buster/main amd64 mingw-w64-x86-64-dev all 6.0.0-3 [3454 kB]
15:49:08 #15 17.19 Get:9 http://deb.debian.org/debian buster/main amd64 gcc-mingw-w64-base amd64 8.3.0-6+21.3~deb10u2 [175 kB]
15:49:08 #15 17.19 Get:10 http://deb.debian.org/debian buster/main amd64 gcc-mingw-w64-x86-64 amd64 8.3.0-6+21.3~deb10u2 [35.8 MB]
15:49:08 #15 18.63 Get:11 http://deb.debian.org/debian buster/main amd64 g++-mingw-w64-x86-64 amd64 8.3.0-6+21.3~deb10u2 [25.3 MB]
15:49:08 #15 19.47 Get:12 http://deb.debian.org/debian buster/main amd64 libapparmor1 amd64 2.13.2-10 [94.7 kB]
15:49:08 #15 19.47 Get:13 http://deb.debian.org/debian buster/main amd64 libapparmor-dev amd64 2.13.2-10 [136 kB]
15:49:08 #15 19.47 Get:14 http://deb.debian.org/debian buster/main amd64 libbtrfs0 amd64 4.20.1-2 [42.0 kB]
15:49:08 #15 19.48 Get:15 http://deb.debian.org/debian buster/main amd64 libbtrfs-dev amd64 4.20.1-2 [77.1 kB]
15:49:08 #15 19.48 Get:16 http://deb.debian.org/debian buster/main amd64 libdevmapper-event1.02.1 amd64 2:1.02.155-3 [22.6 kB]
15:49:08 #15 19.49 Get:17 http://deb.debian.org/debian buster/main amd64 libudev-dev amd64 241-7~deb10u8 [110 kB]
15:49:08 #15 19.49 Get:18 http://deb.debian.org/debian buster/main amd64 libsepol1-dev amd64 2.8-1 [338 kB]
15:49:08 #15 19.50 Get:19 http://deb.debian.org/debian buster/main amd64 libpcre16-3 amd64 2:8.39-12 [259 kB]
15:49:08 #15 19.51 Get:20 http://deb.debian.org/debian buster/main amd64 libpcre32-3 amd64 2:8.39-12 [250 kB]
15:49:08 #15 19.52 Get:21 http://deb.debian.org/debian buster/main amd64 libpcrecpp0v5 amd64 2:8.39-12 [152 kB]
15:49:08 #15 19.52 Get:22 http://deb.debian.org/debian buster/main amd64 libpcre3-dev amd64 2:8.39-12 [650 kB]
15:49:08 #15 19.54 Get:23 http://deb.debian.org/debian buster/main amd64 libselinux1-dev amd64 2.8-1+b1 [169 kB]
15:49:08 #15 19.55 Get:24 http://deb.debian.org/debian buster/main amd64 libdevmapper-dev amd64 2:1.02.155-3 [51.4 kB]
15:49:08 #15 19.55 Get:25 http://deb.debian.org/debian buster-backports/main amd64 libseccomp-dev amd64 2.5.1-1~bpo10+1 [90.3 kB]
15:49:08 #15 19.55 Get:26 http://deb.debian.org/debian buster/main amd64 libsystemd-dev amd64 241-7~deb10u8 [322 kB]
15:49:08 #15 19.93 debconf: delaying package configuration, since apt-utils is not installed
15:49:08 #15 20.03 Fetched 77.8 MB in 3s (24.0 MB/s)
15:49:08 #15 20.08 (Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
15:49:08 #15 ...
15:49:08
15:49:08 #18 [tini 2/2] RUN --mount=type=cache,target=/root/.cache/go-build --mount=type=cache,target=/go/pkg/mod --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install PREFIX=/build /tmp/install/install.sh tini
15:49:08 #18 sha256:4a2ee2e310b74d7919206cfc82cb944f97ecb735d74d8ecbdde956bb2e048ab0
15:49:09 #18 1.155 + RM_GOPATH=0
15:49:09 #18 1.156 + TMP_GOPATH=
15:49:09 #18 1.156 + : /build
15:49:09 #18 1.156 + '[' -z '' ']'
15:49:09 #18 1.158 ++ mktemp -d
15:49:09 #18 1.161 + export GOPATH=/tmp/tmp.v5gCTR8uZb
15:49:09 #18 1.161 + GOPATH=/tmp/tmp.v5gCTR8uZb
15:49:09 #18 1.161 + RM_GOPATH=1
15:49:09 #18 1.162 + case "$(go env GOARCH)" in
15:49:09 #18 1.163 ++ go env GOARCH
15:49:09 #18 1.172 + export GO_BUILDMODE=-buildmode=pie
15:49:09 #18 1.172 + GO_BUILDMODE=-buildmode=pie
15:49:09 #18 1.172 ++ dirname /tmp/install/install.sh
15:49:09 #18 1.173 + dir=/tmp/install
15:49:09 #18 1.174 + bin=tini
15:49:09 #18 1.174 + shift
15:49:09 #18 1.174 + '[' '!' -f /tmp/install/tini.installer ']'
15:49:09 #18 1.174 + . /tmp/install/tini.installer
15:49:09 #18 1.174 ++ : v0.19.0
15:49:09 #18 1.175 + install_tini
15:49:09 #18 1.175 + echo 'Install tini version v0.19.0'
15:49:09 #18 1.175 Install tini version v0.19.0
15:49:09 #18 1.175 + git clone https://github.com/krallin/tini.git /tmp/tmp.v5gCTR8uZb/tini
15:49:09 #18 1.177 Cloning into '/tmp/tmp.v5gCTR8uZb/tini'...
15:49:09 #18 1.545 + cd /tmp/tmp.v5gCTR8uZb/tini
15:49:09 #18 1.545 + git checkout -q v0.19.0
15:49:09 #18 1.554 + cmake .
15:49:09 #18 1.791 -- The C compiler identification is GNU 8.3.0
15:49:09 #18 1.816 -- Check for working C compiler: /usr/bin/cc
15:49:10 #18 2.195 -- Check for working C compiler: /usr/bin/cc -- works
15:49:10 #18 2.199 -- Detecting C compiler ABI info
15:49:10 #18 2.400 -- Detecting C compiler ABI info - done
15:49:10 #18 2.421 -- Detecting C compile features
15:49:11 #18 3.388 -- Detecting C compile features - done
15:49:11 #18 3.405 -- Performing Test HAS_BUILTIN_FORTIFY
15:49:11 #18 3.514 -- Performing Test HAS_BUILTIN_FORTIFY - Failed
15:49:11 #18 3.564 -- Configuring done
15:49:11 #18 3.572 -- Generating done
15:49:11 #18 3.579 -- Build files have been written to: /tmp/tmp.v5gCTR8uZb/tini
15:49:11 #18 3.582 + make tini-static
15:49:11 #18 3.734 Scanning dependencies of target tini-static
15:49:11 #18 3.794 [ 50%] Building C object CMakeFiles/tini-static.dir/src/tini.c.o
15:49:12 #18 4.353 [100%] Linking C executable tini-static
15:49:12 #18 4.522 [100%] Built target tini-static
15:49:12 #18 4.579 + mkdir -p /build
15:49:12 #18 4.585 + cp tini-static /build/docker-init
15:49:12 #18 DONE 4.9s
15:49:12
15:49:12 #15 [runtime-dev-cross-false 2/2] RUN --mount=type=cache,sharing=locked,id=moby-cross-false-aptlib,target=/var/lib/apt --mount=type=cache,sharing=locked,id=moby-cross-false-aptcache,target=/var/cache/apt apt-get update && apt-get install -y --no-install-recommends binutils-mingw-w64 g++-mingw-w64-x86-64 libapparmor-dev libbtrfs-dev libdevmapper-dev libseccomp-dev/buster-backports libsystemd-dev libudev-dev
15:49:12 #15 sha256:c3fdcce348f8cdc4ae232ba4c9324023d027b9a11a89d2c0c1db1898ebf6af9f
15:49:12 #15 20.08 (Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 15421 files and directories currently installed.)
15:49:12 #15 20.13 Preparing to unpack .../libseccomp2_2.5.1-1~bpo10+1_amd64.deb ...
15:49:12 #15 20.17 Unpacking libseccomp2:amd64 (2.5.1-1~bpo10+1) over (2.3.3-4) ...
15:49:12 #15 20.25 Setting up libseccomp2:amd64 (2.5.1-1~bpo10+1) ...
15:49:12 #15 20.34 Selecting previously unselected package binutils-mingw-w64-i686.
15:49:12 #15 20.34 (Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 15421 files and directories currently installed.)
15:49:12 #15 20.37 Preparing to unpack .../00-binutils-mingw-w64-i686_2.31.1-11+8.3_amd64.deb ...
15:49:12 #15 20.37 Unpacking binutils-mingw-w64-i686 (2.31.1-11+8.3) ...
15:49:12 #15 21.15 Selecting previously unselected package binutils-mingw-w64-x86-64.
15:49:12 #15 21.15 Preparing to unpack .../01-binutils-mingw-w64-x86-64_2.31.1-11+8.3_amd64.deb ...
15:49:12 #15 21.16 Unpacking binutils-mingw-w64-x86-64 (2.31.1-11+8.3) ...
15:49:12 #15 22.09 Selecting previously unselected package binutils-mingw-w64.
15:49:12 #15 22.09 Preparing to unpack .../02-binutils-mingw-w64_2.31.1-11+8.3_all.deb ...
15:49:12 #15 22.10 Unpacking binutils-mingw-w64 (2.31.1-11+8.3) ...
15:49:12 #15 22.16 Selecting previously unselected package libdevmapper1.02.1:amd64.
15:49:12 #15 22.17 Preparing to unpack .../03-libdevmapper1.02.1_2%3a1.02.155-3_amd64.deb ...
15:49:12 #15 22.17 Unpacking libdevmapper1.02.1:amd64 (2:1.02.155-3) ...
15:49:12 #15 22.28 Selecting previously unselected package dmsetup.
15:49:12 #15 22.28 Preparing to unpack .../04-dmsetup_2%3a1.02.155-3_amd64.deb ...
15:49:12 #15 22.29 Unpacking dmsetup (2:1.02.155-3) ...
15:49:12 #15 22.38 Selecting previously unselected package mingw-w64-common.
15:49:12 #15 22.38 Preparing to unpack .../05-mingw-w64-common_6.0.0-3_all.deb ...
15:49:12 #15 22.39 Unpacking mingw-w64-common (6.0.0-3) ...
15:49:12 #15 24.55 Selecting previously unselected package mingw-w64-x86-64-dev.
15:49:12 #15 24.56 Preparing to unpack .../06-mingw-w64-x86-64-dev_6.0.0-3_all.deb ...
15:49:12 #15 24.57 Unpacking mingw-w64-x86-64-dev (6.0.0-3) ...
15:49:15 #15 27.12 Selecting previously unselected package gcc-mingw-w64-base.
15:49:15 #15 27.12 Preparing to unpack .../07-gcc-mingw-w64-base_8.3.0-6+21.3~deb10u2_amd64.deb ...
15:49:15 #15 27.13 Unpacking gcc-mingw-w64-base (8.3.0-6+21.3~deb10u2) ...
15:49:15 #15 27.21 Selecting previously unselected package gcc-mingw-w64-x86-64.
15:49:15 #15 27.21 Preparing to unpack .../08-gcc-mingw-w64-x86-64_8.3.0-6+21.3~deb10u2_amd64.deb ...
15:49:15 #15 27.22 Unpacking gcc-mingw-w64-x86-64 (8.3.0-6+21.3~deb10u2) ...
15:49:22 #15 ...
15:49:22
15:49:22 #23 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build --mount=type=cache,target=/go/pkg/mod --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install PREFIX=/build /tmp/install/install.sh containerd
15:49:22 #23 sha256:c95117a4bbe7a93e131750b83c8b17c93e43bd500519847009154c51915cea9a
15:49:22 #23 20.96 + cd /tmp/tmp.hEWqfRqauJ/src/github.com/containerd/containerd
15:49:22 #23 20.96 + git checkout -q v1.6.7
15:49:22 #23 21.85 + export 'BUILDTAGS=netgo osusergo static_build'
15:49:22 #23 21.85 + BUILDTAGS='netgo osusergo static_build'
15:49:22 #23 21.85 + export EXTRA_FLAGS=-buildmode=pie
15:49:22 #23 21.85 + EXTRA_FLAGS=-buildmode=pie
15:49:22 #23 21.85 + export 'EXTRA_LDFLAGS=-extldflags "-fno-PIC -static"'
15:49:22 #23 21.85 + EXTRA_LDFLAGS='-extldflags "-fno-PIC -static"'
15:49:22 #23 21.85 + '[' '' = dynamic ']'
15:49:22 #23 21.85 + make
15:49:23 #23 23.07 + bin/ctr
15:49:27 #23 ...
15:49:27
15:49:27 #15 [runtime-dev-cross-false 2/2] RUN --mount=type=cache,sharing=locked,id=moby-cross-false-aptlib,target=/var/lib/apt --mount=type=cache,sharing=locked,id=moby-cross-false-aptcache,target=/var/cache/apt apt-get update && apt-get install -y --no-install-recommends binutils-mingw-w64 g++-mingw-w64-x86-64 libapparmor-dev libbtrfs-dev libdevmapper-dev libseccomp-dev/buster-backports libsystemd-dev libudev-dev
15:49:27 #15 sha256:c3fdcce348f8cdc4ae232ba4c9324023d027b9a11a89d2c0c1db1898ebf6af9f
15:49:27 #15 34.29 Selecting previously unselected package g++-mingw-w64-x86-64.
15:49:27 #15 34.30 Preparing to unpack .../09-g++-mingw-w64-x86-64_8.3.0-6+21.3~deb10u2_amd64.deb ...
15:49:27 #15 34.30 Unpacking g++-mingw-w64-x86-64 (8.3.0-6+21.3~deb10u2) ...
15:49:27 #15 39.71 Selecting previously unselected package libapparmor1:amd64.
15:49:27 #15 39.71 Preparing to unpack .../10-libapparmor1_2.13.2-10_amd64.deb ...
15:49:27 #15 39.72 Unpacking libapparmor1:amd64 (2.13.2-10) ...
15:49:27 #15 39.78 Selecting previously unselected package libapparmor-dev:amd64.
15:49:27 #15 39.79 Preparing to unpack .../11-libapparmor-dev_2.13.2-10_amd64.deb ...
15:49:27 #15 39.79 Unpacking libapparmor-dev:amd64 (2.13.2-10) ...
15:49:27 #15 39.86 Selecting previously unselected package libbtrfs0.
15:49:27 #15 39.87 Preparing to unpack .../12-libbtrfs0_4.20.1-2_amd64.deb ...
15:49:27 #15 39.87 Unpacking libbtrfs0 (4.20.1-2) ...
15:49:27 #15 39.92 Selecting previously unselected package libbtrfs-dev.
15:49:27 #15 39.93 Preparing to unpack .../13-libbtrfs-dev_4.20.1-2_amd64.deb ...
15:49:27 #15 39.93 Unpacking libbtrfs-dev (4.20.1-2) ...
15:49:27 #15 39.99 Selecting previously unselected package libdevmapper-event1.02.1:amd64.
15:49:28 #15 40.00 Preparing to unpack .../14-libdevmapper-event1.02.1_2%3a1.02.155-3_amd64.deb ...
15:49:28 #15 40.01 Unpacking libdevmapper-event1.02.1:amd64 (2:1.02.155-3) ...
15:49:28 #15 40.05 Selecting previously unselected package libudev-dev:amd64.
15:49:28 #15 40.05 Preparing to unpack .../15-libudev-dev_241-7~deb10u8_amd64.deb ...
15:49:28 #15 40.07 Unpacking libudev-dev:amd64 (241-7~deb10u8) ...
15:49:28 #15 40.15 Selecting previously unselected package libsepol1-dev:amd64.
15:49:28 #15 40.16 Preparing to unpack .../16-libsepol1-dev_2.8-1_amd64.deb ...
15:49:28 #15 40.16 Unpacking libsepol1-dev:amd64 (2.8-1) ...
15:49:28 #15 40.33 Selecting previously unselected package libpcre16-3:amd64.
15:49:28 #15 40.33 Preparing to unpack .../17-libpcre16-3_2%3a8.39-12_amd64.deb ...
15:49:28 #15 40.34 Unpacking libpcre16-3:amd64 (2:8.39-12) ...
15:49:28 #15 40.43 Selecting previously unselected package libpcre32-3:amd64.
15:49:28 #15 40.44 Preparing to unpack .../18-libpcre32-3_2%3a8.39-12_amd64.deb ...
15:49:28 #15 40.44 Unpacking libpcre32-3:amd64 (2:8.39-12) ...
15:49:28 #15 40.54 Selecting previously unselected package libpcrecpp0v5:amd64.
15:49:28 #15 40.54 Preparing to unpack .../19-libpcrecpp0v5_2%3a8.39-12_amd64.deb ...
15:49:28 #15 40.55 Unpacking libpcrecpp0v5:amd64 (2:8.39-12) ...
15:49:28 #15 40.60 Selecting previously unselected package libpcre3-dev:amd64.
15:49:28 #15 40.60 Preparing to unpack .../20-libpcre3-dev_2%3a8.39-12_amd64.deb ...
15:49:28 #15 40.61 Unpacking libpcre3-dev:amd64 (2:8.39-12) ...
15:49:28 #15 40.78 Selecting previously unselected package libselinux1-dev:amd64.
15:49:28 #15 40.78 Preparing to unpack .../21-libselinux1-dev_2.8-1+b1_amd64.deb ...
15:49:28 #15 40.79 Unpacking libselinux1-dev:amd64 (2.8-1+b1) ...
15:49:28 #15 40.91 Selecting previously unselected package libdevmapper-dev:amd64.
15:49:28 #15 40.91 Preparing to unpack .../22-libdevmapper-dev_2%3a1.02.155-3_amd64.deb ...
15:49:28 #15 40.92 Unpacking libdevmapper-dev:amd64 (2:1.02.155-3) ...
15:49:28 #15 40.96 Selecting previously unselected package libseccomp-dev:amd64.
15:49:29 #15 40.97 Preparing to unpack .../23-libseccomp-dev_2.5.1-1~bpo10+1_amd64.deb ...
15:49:29 #15 40.98 Unpacking libseccomp-dev:amd64 (2.5.1-1~bpo10+1) ...
15:49:29 #15 41.04 Selecting previously unselected package libsystemd-dev:amd64.
15:49:29 #15 41.05 Preparing to unpack .../24-libsystemd-dev_241-7~deb10u8_amd64.deb ...
15:49:29 #15 41.06 Unpacking libsystemd-dev:amd64 (241-7~deb10u8) ...
15:49:29 #15 41.28 Setting up libpcrecpp0v5:amd64 (2:8.39-12) ...
15:49:29 #15 41.28 Setting up libseccomp-dev:amd64 (2.5.1-1~bpo10+1) ...
15:49:29 #15 41.30 Setting up libapparmor1:amd64 (2.13.2-10) ...
15:49:29 #15 41.30 Setting up binutils-mingw-w64-x86-64 (2.31.1-11+8.3) ...
15:49:29 #15 41.31 Setting up libpcre16-3:amd64 (2:8.39-12) ...
15:49:29 #15 41.32 Setting up libsepol1-dev:amd64 (2.8-1) ...
15:49:29 #15 41.33 Setting up gcc-mingw-w64-base (8.3.0-6+21.3~deb10u2) ...
15:49:29 #15 41.34 Setting up libbtrfs0 (4.20.1-2) ...
15:49:29 #15 41.35 Setting up libpcre32-3:amd64 (2:8.39-12) ...
15:49:29 #15 41.36 Setting up libudev-dev:amd64 (241-7~deb10u8) ...
15:49:29 #15 41.38 Setting up binutils-mingw-w64-i686 (2.31.1-11+8.3) ...
15:49:29 #15 41.39 Setting up libbtrfs-dev (4.20.1-2) ...
15:49:29 #15 41.40 Setting up libapparmor-dev:amd64 (2.13.2-10) ...
15:49:29 #15 41.41 Setting up mingw-w64-common (6.0.0-3) ...
15:49:29 #15 41.42 Setting up libsystemd-dev:amd64 (241-7~deb10u8) ...
15:49:29 #15 41.43 Setting up mingw-w64-x86-64-dev (6.0.0-3) ...
15:49:29 #15 41.44 Setting up libpcre3-dev:amd64 (2:8.39-12) ...
15:49:29 #15 41.45 Setting up gcc-mingw-w64-x86-64 (8.3.0-6+21.3~deb10u2) ...
15:49:29 #15 41.46 update-alternatives: using /usr/bin/x86_64-w64-mingw32-gcc-posix to provide /usr/bin/x86_64-w64-mingw32-gcc (x86_64-w64-mingw32-gcc) in auto mode
15:49:29 #15 41.47 update-alternatives: using /usr/bin/x86_64-w64-mingw32-gcc-win32 to provide /usr/bin/x86_64-w64-mingw32-gcc (x86_64-w64-mingw32-gcc) in auto mode
15:49:29 #15 41.47 Setting up g++-mingw-w64-x86-64 (8.3.0-6+21.3~deb10u2) ...
15:49:29 #15 41.48 update-alternatives: using /usr/bin/x86_64-w64-mingw32-g++-posix to provide /usr/bin/x86_64-w64-mingw32-g++ (x86_64-w64-mingw32-g++) in auto mode
15:49:29 #15 41.49 update-alternatives: using /usr/bin/x86_64-w64-mingw32-g++-win32 to provide /usr/bin/x86_64-w64-mingw32-g++ (x86_64-w64-mingw32-g++) in auto mode
15:49:29 #15 41.49 Setting up binutils-mingw-w64 (2.31.1-11+8.3) ...
15:49:29 #15 41.50 Setting up libselinux1-dev:amd64 (2.8-1+b1) ...
15:49:29 #15 41.51 Setting up libdevmapper1.02.1:amd64 (2:1.02.155-3) ...
15:49:29 #15 41.52 Setting up dmsetup (2:1.02.155-3) ...
15:49:29 #15 41.53 Setting up libdevmapper-event1.02.1:amd64 (2:1.02.155-3) ...
15:49:29 #15 41.54 Setting up libdevmapper-dev:amd64 (2:1.02.155-3) ...
15:49:29 #15 41.55 Processing triggers for libc-bin (2.28-10+deb10u1) ...
15:49:30 #15 DONE 42.3s
15:49:30
15:49:30 #19 [binary-base 1/7] COPY --from=tini /build/ /usr/local/bin/
15:49:30 #19 sha256:d3118e94bc3081e911a655352af7eb99567a35f4d05f5bf6d861ef8f9db4f3fd
15:49:30 #19 DONE 0.1s
15:49:30
15:49:30 #20 [runc 1/1] RUN --mount=type=cache,target=/root/.cache/go-build --mount=type=cache,target=/go/pkg/mod --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install PREFIX=/build /tmp/install/install.sh runc
15:49:30 #20 sha256:f1e490356a9502ad35ea6b52afba9441987cad3d6ab6a6b3e76e5ca40861fc83
15:49:31 #20 0.932 + RM_GOPATH=0
15:49:31 #20 0.932 + TMP_GOPATH=
15:49:31 #20 0.932 + : /build
15:49:31 #20 0.932 + '[' -z '' ']'
15:49:31 #20 0.933 ++ mktemp -d
15:49:31 #20 0.934 + export GOPATH=/tmp/tmp.7eYuORk2u7
15:49:31 #20 0.934 + GOPATH=/tmp/tmp.7eYuORk2u7
15:49:31 #20 0.935 + RM_GOPATH=1
15:49:31 #20 0.935 + case "$(go env GOARCH)" in
15:49:31 #20 0.935 ++ go env GOARCH
15:49:31 #20 0.955 + export GO_BUILDMODE=-buildmode=pie
15:49:31 #20 0.955 + GO_BUILDMODE=-buildmode=pie
15:49:31 #20 0.956 ++ dirname /tmp/install/install.sh
15:49:31 #20 0.957 + dir=/tmp/install
15:49:31 #20 0.957 + bin=runc
15:49:31 #20 0.957 + shift
15:49:31 #20 0.958 + '[' '!' -f /tmp/install/runc.installer ']'
15:49:31 #20 0.958 + . /tmp/install/runc.installer
15:49:31 #20 0.958 ++ set -e
15:49:31 #20 0.958 ++ : v1.1.3
15:49:31 #20 0.959 + install_runc
15:49:31 #20 0.959 + RUNC_BUILDTAGS=seccomp
15:49:31 #20 0.959 + echo 'Install runc version v1.1.3 (build tags: seccomp)'
15:49:31 #20 0.959 Install runc version v1.1.3 (build tags: seccomp)
15:49:31 #20 0.960 + git clone https://github.com/opencontainers/runc.git /tmp/tmp.7eYuORk2u7/src/github.com/opencontainers/runc
15:49:31 #20 0.964 Cloning into '/tmp/tmp.7eYuORk2u7/src/github.com/opencontainers/runc'...
15:49:35 #20 4.805 + cd /tmp/tmp.7eYuORk2u7/src/github.com/opencontainers/runc
15:49:35 #20 4.806 + git checkout -q v1.1.3
15:49:35 #20 5.113 + '[' -z '' ']'
15:49:35 #20 5.113 + target=static
15:49:35 #20 5.114 + make BUILDTAGS=seccomp static
15:49:35 #20 5.309 CGO_ENABLED=1 go build -trimpath -tags "seccomp netgo osusergo" -ldflags "-extldflags -static -X main.gitCommit=v1.1.3-0-g6724737f -X main.version=1.1.3 " -o runc .
15:49:36 #20 ...
15:49:36
15:49:36 #25 [rootlesskit 1/3] RUN --mount=type=cache,target=/root/.cache/go-build --mount=type=cache,target=/go/pkg/mod --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install PREFIX=/build /tmp/install/install.sh rootlesskit
15:49:36 #25 sha256:677fecf074f42e4a98b3424a301cc49e0fcf79219bfedac1b62b176ba7e34760
15:49:36 #25 45.13 + for f in rootlesskit rootlesskit-docker-proxy
15:49:36 #25 45.13 + GOBIN=/build
15:49:36 #25 45.13 + GO111MODULE=on
15:49:36 #25 45.13 + go install -ldflags= github.com/rootless-containers/rootlesskit/cmd/rootlesskit-docker-proxy@v0.14.4
15:49:36 #25 DONE 48.0s
15:49:36
15:49:36 #26 [rootlesskit 2/3] COPY ./contrib/dockerd-rootless.sh /build
15:49:36 #26 sha256:5ed20d4433579bc313448794b1342de308472a061e3b5d09869a34007d9cedb5
15:49:36 #26 DONE 0.1s
15:49:36
15:49:36 #27 [rootlesskit 3/3] COPY ./contrib/dockerd-rootless-setuptool.sh /build
15:49:36 #27 sha256:7d8c0ca42a8e24d3f64f9f7222cc1d0f55a585ddf0e1ef7e2b43f9663b102077
15:49:36 #27 DONE 0.0s
15:49:36
15:49:36 #20 [runc 1/1] RUN --mount=type=cache,target=/root/.cache/go-build --mount=type=cache,target=/go/pkg/mod --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install PREFIX=/build /tmp/install/install.sh runc
15:49:36 #20 sha256:f1e490356a9502ad35ea6b52afba9441987cad3d6ab6a6b3e76e5ca40861fc83
15:50:43 #20 70.14 + mkdir -p /build
15:50:43 #20 70.15 + cp runc /build/runc
15:50:43 #20 DONE 70.4s
15:50:43
15:50:43 #23 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build --mount=type=cache,target=/go/pkg/mod --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install PREFIX=/build /tmp/install/install.sh containerd
15:50:43 #23 sha256:c95117a4bbe7a93e131750b83c8b17c93e43bd500519847009154c51915cea9a
15:50:43 #23 ...
15:50:43
15:50:43 #21 [binary-base 2/7] COPY --from=runc /build/ /usr/local/bin/
15:50:43 #21 sha256:e882295822efb61fcaa2be6f12a4daae1645921f46a5ff2876172bb5d547b680
15:50:43 #21 DONE 0.1s
15:50:43
15:50:43 #23 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build --mount=type=cache,target=/go/pkg/mod --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install PREFIX=/build /tmp/install/install.sh containerd
15:50:43 #23 sha256:c95117a4bbe7a93e131750b83c8b17c93e43bd500519847009154c51915cea9a
15:50:58 #23 117.4 + bin/containerd
15:51:54 #23 169.1 # github.com/containerd/containerd/cmd/containerd
15:51:54 #23 169.1 /usr/bin/ld: /tmp/go-link-597819172/000019.o: in function `New':
15:51:54 #23 169.1 /tmp/tmp.hEWqfRqauJ/src/github.com/containerd/containerd/vendor/github.com/miekg/pkcs11/pkcs11.go:77: warning: Using 'dlopen' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
15:51:54 #23 169.2 + bin/containerd-stress
15:51:54 #23 170.3 + bin/containerd-shim
15:52:02 #23 181.4 + bin/containerd-shim-runc-v1
15:52:08 #23 187.7 + bin/containerd-shim-runc-v2
15:52:09 #23 188.5 + binaries
15:52:09 #23 188.5 + install -D bin/containerd /build/containerd
15:52:09 #23 188.5 + install -D bin/containerd-shim /build/containerd-shim
15:52:09 #23 188.5 + install -D bin/containerd-shim-runc-v2 /build/containerd-shim-runc-v2
15:52:09 #23 188.5 + install -D bin/ctr /build/ctr
15:52:09 #23 DONE 188.9s
15:52:10
15:52:10 #24 [binary-base 3/7] COPY --from=containerd /build/ /usr/local/bin/
15:52:10 #24 sha256:797d43ff68ad0b4a09b09be465f2fda84934020a529f65d4980d29901041db58
15:52:10 #24 DONE 0.2s
15:52:10
15:52:10 #28 [binary-base 4/7] COPY --from=rootlesskit /build/ /usr/local/bin/
15:52:10 #28 sha256:bea2d9bd1128346a39338f069986fe0ef63c86c8a47e1378318ba539179cd3ae
15:52:10 #28 DONE 0.1s
15:52:10
15:52:10 #30 [binary-base 5/7] COPY --from=proxy /build/ /usr/local/bin/
15:52:10 #30 sha256:7c7a053cdea78e5c4dbc7271d8972150969e73c091ed4611cf552d432a700836
15:52:10 #30 DONE 0.1s
15:52:10
15:52:10 #35 [binary-base 6/7] COPY --from=vpnkit /build/ /usr/local/bin/
15:52:10 #35 sha256:43074c071e05a0306f7ff09e1521cb432e2162676389052ff53b0caaa97d33f2
15:52:10 #35 DONE 0.2s
15:52:10
15:52:10 #36 [binary-base 7/7] WORKDIR /go/src/github.com/docker/docker
15:52:10 #36 sha256:134f539b9265fdf24685b63212e822a0a2fbb4f87ed0398c83b2904ce4ca514f
15:52:10 #36 DONE 0.0s
15:52:10
15:52:10 #37 [build-binary 1/1] RUN --mount=type=cache,target=/root/.cache/go-build --mount=type=bind,target=/go/src/github.com/docker/docker hack/make.sh binary
15:52:10 #37 sha256:9541b65b99e58464cfc4398366fd7b3829351cac55005e1a7616c145b459e69d
15:52:11 #37 0.341
15:52:11 #37 0.404 Removing /build/bundles/
15:52:11 #37 0.405
15:52:11 #37 0.410 ---> Making bundle: binary (in /build/bundles/binary)
15:52:11 #37 0.438 Building: /build/bundles/binary-daemon/dockerd-0.0.0-20220819151947-0785bd7
15:52:11 #37 0.438 GOOS="" GOARCH="" GOARM=""
15:53:47 #37 83.91 Created binary: /build/bundles/binary-daemon/dockerd-0.0.0-20220819151947-0785bd7
15:53:47 #37 84.36 Copying nested executables into /build/bundles/binary-daemon
15:53:47 #37 85.58
15:53:47 #37 DONE 86.0s
15:53:47
15:53:47 #38 [binary 1/1] COPY --from=build-binary /build/bundles/ /
15:53:47 #38 sha256:8b4e6c2e268c26ab73de351ced5ead605dfe27df29ab1ff8f525c54f9b246ec4
15:53:47 #38 DONE 0.4s
15:53:47
15:53:47 #39 exporting to client
15:53:47 #39 sha256:b60a1292d407630dbb741f28ab6ea4ce3cca872ac28eeee56f4e66a182eca4bc
15:53:47 #39 copying files 33B
15:53:47 #39 copying files 202.97MB 1.1s done
15:53:47 #39 DONE 1.1s
15:53:47 make[2]: Leaving directory '/home/ubuntu/workspace/docker-ce-packaging_20.10/src/github.com/docker/docker'
15:53:47 mkdir -p build/linux/docker
15:53:47 cp /home/ubuntu/workspace/docker-ce-packaging_20.10/src/github.com/docker/cli/build/docker build/linux/docker/
15:53:47 for f in dockerd containerd ctr containerd-shim containerd-shim-runc-v2 docker-init docker-proxy runc; do \
15:53:47 cp -L /home/ubuntu/workspace/docker-ce-packaging_20.10/src/github.com/docker/docker/bundles/binary-daemon/$f build/linux/docker/$f; \
15:53:47 done
15:53:47 tar -C build/linux -c -z -f build/linux/docker-0.0.0-20220819151947-0785bd7.tgz docker
15:53:49 # extra binaries for running rootless
15:53:49 mkdir -p build/linux/docker-rootless-extras
15:53:49 for f in rootlesskit rootlesskit-docker-proxy dockerd-rootless.sh dockerd-rootless-setuptool.sh vpnkit; do \
15:53:49 if [ -f /home/ubuntu/workspace/docker-ce-packaging_20.10/src/github.com/docker/docker/bundles/binary-daemon/$f ]; then \
15:53:49 cp -L /home/ubuntu/workspace/docker-ce-packaging_20.10/src/github.com/docker/docker/bundles/binary-daemon/$f build/linux/docker-rootless-extras/$f; \
15:53:49 fi \
15:53:49 done
15:53:49 tar -C build/linux -c -z -f build/linux/docker-rootless-extras-0.0.0-20220819151947-0785bd7.tgz docker-rootless-extras
15:53:51 make[1]: Leaving directory '/home/ubuntu/workspace/docker-ce-packaging_20.10/static'
![[Jenkins]](/public/static/259a862a/images/svgs/logo.svg){kind=logo}
