Skip to content
[Jenkins]Jenkins
log in

Console Output

Skipping 272 KB.. Full Log
15 14.09   libseccomp2 libselinux1-dev libsepol1-dev mingw-w64-common
21:50:17 #15 14.09   mingw-w64-x86-64-dev
21:50:17 #15 14.09 Suggested packages:
21:50:17 #15 14.09   gcc-8-locales seccomp wine64
21:50:17 #15 14.53 The following NEW packages will be installed:
21:50:17 #15 14.54   binutils-mingw-w64 binutils-mingw-w64-i686 binutils-mingw-w64-x86-64 dmsetup
21:50:17 #15 14.54   g++-mingw-w64-x86-64 gcc-mingw-w64-base gcc-mingw-w64-x86-64 libapparmor-dev
21:50:17 #15 14.56   libapparmor1 libbtrfs-dev libbtrfs0 libdevmapper-dev
21:50:17 #15 14.56   libdevmapper-event1.02.1 libdevmapper1.02.1 libpcre16-3 libpcre3-dev
21:50:17 #15 14.56   libpcre32-3 libpcrecpp0v5 libseccomp-dev libselinux1-dev libsepol1-dev
21:50:17 #15 14.56   libsystemd-dev libudev-dev mingw-w64-common mingw-w64-x86-64-dev
21:50:17 #15 14.57 The following packages will be upgraded:
21:50:17 #15 14.57   libseccomp2
21:50:17 #15 14.91 1 upgraded, 25 newly installed, 0 to remove and 0 not upgraded.
21:50:17 #15 14.91 Need to get 77.8 MB of archives.
21:50:17 #15 14.91 After this operation, 487 MB of additional disk space will be used.
21:50:17 #15 14.91 Get:1 http://deb.debian.org/debian buster-backports/main amd64 libseccomp2 amd64 2.5.1-1~bpo10+1 [47.7 kB]
21:50:17 #15 14.91 Get:2 http://deb.debian.org/debian buster/main amd64 binutils-mingw-w64-i686 amd64 2.31.1-11+8.3 [2310 kB]
21:50:17 #15 14.97 Get:3 http://deb.debian.org/debian buster/main amd64 binutils-mingw-w64-x86-64 amd64 2.31.1-11+8.3 [2642 kB]
21:50:17 #15 15.10 Get:4 http://deb.debian.org/debian buster/main amd64 binutils-mingw-w64 all 2.31.1-11+8.3 [138 kB]
21:50:17 #15 15.10 Get:5 http://deb.debian.org/debian buster/main amd64 libdevmapper1.02.1 amd64 2:1.02.155-3 [141 kB]
21:50:17 #15 15.10 Get:6 http://deb.debian.org/debian buster/main amd64 dmsetup amd64 2:1.02.155-3 [90.8 kB]
21:50:17 #15 15.11 Get:7 http://deb.debian.org/debian buster/main amd64 mingw-w64-common all 6.0.0-3 [4910 kB]
21:50:17 #15 15.24 Get:8 http://deb.debian.org/debian buster/main amd64 mingw-w64-x86-64-dev all 6.0.0-3 [3454 kB]
21:50:17 #15 15.35 Get:9 http://deb.debian.org/debian buster/main amd64 gcc-mingw-w64-base amd64 8.3.0-6+21.3~deb10u2 [175 kB]
21:50:17 #15 15.36 Get:10 http://deb.debian.org/debian buster/main amd64 gcc-mingw-w64-x86-64 amd64 8.3.0-6+21.3~deb10u2 [35.8 MB]
21:50:17 #15 16.92 Get:11 http://deb.debian.org/debian buster/main amd64 g++-mingw-w64-x86-64 amd64 8.3.0-6+21.3~deb10u2 [25.3 MB]
21:50:17 #15 17.98 Get:12 http://deb.debian.org/debian buster/main amd64 libapparmor1 amd64 2.13.2-10 [94.7 kB]
21:50:17 #15 17.98 Get:13 http://deb.debian.org/debian buster/main amd64 libapparmor-dev amd64 2.13.2-10 [136 kB]
21:50:17 #15 17.99 Get:14 http://deb.debian.org/debian buster/main amd64 libbtrfs0 amd64 4.20.1-2 [42.0 kB]
21:50:17 #15 17.99 Get:15 http://deb.debian.org/debian buster/main amd64 libbtrfs-dev amd64 4.20.1-2 [77.1 kB]
21:50:17 #15 17.99 Get:16 http://deb.debian.org/debian buster/main amd64 libdevmapper-event1.02.1 amd64 2:1.02.155-3 [22.6 kB]
21:50:17 #15 17.99 Get:17 http://deb.debian.org/debian buster/main amd64 libudev-dev amd64 241-7~deb10u8 [110 kB]
21:50:17 #15 18.00 Get:18 http://deb.debian.org/debian buster/main amd64 libsepol1-dev amd64 2.8-1 [338 kB]
21:50:17 #15 18.01 Get:19 http://deb.debian.org/debian buster/main amd64 libpcre16-3 amd64 2:8.39-12 [259 kB]
21:50:17 #15 18.02 Get:20 http://deb.debian.org/debian buster/main amd64 libpcre32-3 amd64 2:8.39-12 [250 kB]
21:50:17 #15 18.03 Get:21 http://deb.debian.org/debian buster/main amd64 libpcrecpp0v5 amd64 2:8.39-12 [152 kB]
21:50:17 #15 18.03 Get:22 http://deb.debian.org/debian buster/main amd64 libpcre3-dev amd64 2:8.39-12 [650 kB]
21:50:17 #15 18.06 Get:23 http://deb.debian.org/debian buster/main amd64 libselinux1-dev amd64 2.8-1+b1 [169 kB]
21:50:17 #15 18.06 Get:24 http://deb.debian.org/debian buster/main amd64 libdevmapper-dev amd64 2:1.02.155-3 [51.4 kB]
21:50:17 #15 18.07 Get:25 http://deb.debian.org/debian buster-backports/main amd64 libseccomp-dev amd64 2.5.1-1~bpo10+1 [90.3 kB]
21:50:17 #15 18.07 Get:26 http://deb.debian.org/debian buster/main amd64 libsystemd-dev amd64 241-7~deb10u8 [322 kB]
21:50:17 #15 18.53 debconf: delaying package configuration, since apt-utils is not installed
21:50:17 #15 18.58 Fetched 77.8 MB in 3s (22.4 MB/s)
21:50:17 #15 18.62 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 15421 files and directories currently installed.)
21:50:17 #15 18.66 Preparing to unpack .../libseccomp2_2.5.1-1~bpo10+1_amd64.deb ...
21:50:17 #15 18.68 Unpacking libseccomp2:amd64 (2.5.1-1~bpo10+1) over (2.3.3-4) ...
21:50:17 #15 18.76 Setting up libseccomp2:amd64 (2.5.1-1~bpo10+1) ...
21:50:17 #15 18.83 Selecting previously unselected package binutils-mingw-w64-i686.
21:50:17 #15 18.83 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 15421 files and directories currently installed.)
21:50:17 #15 18.85 Preparing to unpack .../00-binutils-mingw-w64-i686_2.31.1-11+8.3_amd64.deb ...
21:50:17 #15 18.85 Unpacking binutils-mingw-w64-i686 (2.31.1-11+8.3) ...
21:50:17 #15 19.65 Selecting previously unselected package binutils-mingw-w64-x86-64.
21:50:17 #15 19.65 Preparing to unpack .../01-binutils-mingw-w64-x86-64_2.31.1-11+8.3_amd64.deb ...
21:50:17 #15 19.66 Unpacking binutils-mingw-w64-x86-64 (2.31.1-11+8.3) ...
21:50:17 #15 20.72 Selecting previously unselected package binutils-mingw-w64.
21:50:17 #15 20.76 Preparing to unpack .../02-binutils-mingw-w64_2.31.1-11+8.3_all.deb ...
21:50:17 #15 20.76 Unpacking binutils-mingw-w64 (2.31.1-11+8.3) ...
21:50:17 #15 20.85 Selecting previously unselected package libdevmapper1.02.1:amd64.
21:50:17 #15 20.85 Preparing to unpack .../03-libdevmapper1.02.1_2%3a1.02.155-3_amd64.deb ...
21:50:17 #15 20.86 Unpacking libdevmapper1.02.1:amd64 (2:1.02.155-3) ...
21:50:18 #15 21.00 Selecting previously unselected package dmsetup.
21:50:18 #15 21.00 Preparing to unpack .../04-dmsetup_2%3a1.02.155-3_amd64.deb ...
21:50:18 #15 21.00 Unpacking dmsetup (2:1.02.155-3) ...
21:50:18 #15 21.13 Selecting previously unselected package mingw-w64-common.
21:50:18 #15 21.14 Preparing to unpack .../05-mingw-w64-common_6.0.0-3_all.deb ...
21:50:18 #15 21.15 Unpacking mingw-w64-common (6.0.0-3) ...
21:50:18 #15 ...
21:50:18 
21:50:18 #18 [tini 2/2] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh tini
21:50:18 #18 sha256:3631daf539a295fead44a2b487de6857ed56913cdbbb263da8250a9489bb5446
21:50:18 #18 1.084 + RM_GOPATH=0
21:50:18 #18 1.084 + TMP_GOPATH=
21:50:18 #18 1.085 + : /build
21:50:18 #18 1.085 + '[' -z '' ']'
21:50:18 #18 1.085 ++ mktemp -d
21:50:18 #18 1.087 + export GOPATH=/tmp/tmp.fvwtB31fXU
21:50:18 #18 1.087 + GOPATH=/tmp/tmp.fvwtB31fXU
21:50:18 #18 1.087 + RM_GOPATH=1
21:50:18 #18 1.087 + case "$(go env GOARCH)" in
21:50:18 #18 1.088 ++ go env GOARCH
21:50:18 #18 1.099 + export GO_BUILDMODE=-buildmode=pie
21:50:18 #18 1.099 + GO_BUILDMODE=-buildmode=pie
21:50:18 #18 1.099 ++ dirname /tmp/install/install.sh
21:50:18 #18 1.099 + dir=/tmp/install
21:50:18 #18 1.099 + bin=tini
21:50:18 #18 1.099 + shift
21:50:18 #18 1.099 + '[' '!' -f /tmp/install/tini.installer ']'
21:50:18 #18 1.099 + . /tmp/install/tini.installer
21:50:18 #18 1.099 ++ : v0.19.0
21:50:18 #18 1.099 + install_tini
21:50:18 #18 1.099 + echo 'Install tini version v0.19.0'
21:50:18 #18 1.099 Install tini version v0.19.0
21:50:18 #18 1.099 + git clone https://github.com/krallin/tini.git /tmp/tmp.fvwtB31fXU/tini
21:50:18 #18 1.101 Cloning into '/tmp/tmp.fvwtB31fXU/tini'...
21:50:19 #18 1.516 + cd /tmp/tmp.fvwtB31fXU/tini
21:50:19 #18 1.516 + git checkout -q v0.19.0
21:50:19 #18 1.533 + cmake .
21:50:19 #18 1.726 -- The C compiler identification is GNU 8.3.0
21:50:19 #18 1.757 -- Check for working C compiler: /usr/bin/cc
21:50:19 #18 1.995 -- Check for working C compiler: /usr/bin/cc -- works
21:50:19 #18 1.997 -- Detecting C compiler ABI info
21:50:20 #18 2.174 -- Detecting C compiler ABI info - done
21:50:20 #18 2.204 -- Detecting C compile features
21:50:21 #18 3.171 -- Detecting C compile features - done
21:50:21 #18 3.197 -- Performing Test HAS_BUILTIN_FORTIFY
21:50:21 #18 3.326 -- Performing Test HAS_BUILTIN_FORTIFY - Failed
21:50:21 #18 3.374 -- Configuring done
21:50:21 #18 3.388 -- Generating done
21:50:21 #18 3.394 -- Build files have been written to: /tmp/tmp.fvwtB31fXU/tini
21:50:21 #18 3.396 + make tini-static
21:50:21 #18 3.559 Scanning dependencies of target tini-static
21:50:21 #18 3.582 [ 50%] Building C object CMakeFiles/tini-static.dir/src/tini.c.o
21:50:21 #18 4.036 [100%] Linking C executable tini-static
21:50:22 #18 4.244 [100%] Built target tini-static
21:50:22 #18 4.269 + mkdir -p /build
21:50:22 #18 4.270 + cp tini-static /build/docker-init
21:50:22 #18 DONE 4.7s
21:50:22 
21:50:22 #15 [runtime-dev-cross-false 2/2] RUN --mount=type=cache,sharing=locked,id=moby-cross-false-aptlib,target=/var/lib/apt     --mount=type=cache,sharing=locked,id=moby-cross-false-aptcache,target=/var/cache/apt         apt-get update && apt-get install -y --no-install-recommends             binutils-mingw-w64             g++-mingw-w64-x86-64             libapparmor-dev             libbtrfs-dev             libdevmapper-dev             libseccomp-dev/buster-backports             libsystemd-dev             libudev-dev
21:50:22 #15 sha256:7725ec11f2c306ad36e9ee955d4279b25bf545defe3b6eec52f7ef1cb88874c9
21:50:22 #15 23.41 Selecting previously unselected package mingw-w64-x86-64-dev.
21:50:22 #15 23.42 Preparing to unpack .../06-mingw-w64-x86-64-dev_6.0.0-3_all.deb ...
21:50:22 #15 23.42 Unpacking mingw-w64-x86-64-dev (6.0.0-3) ...
21:50:22 #15 26.05 Selecting previously unselected package gcc-mingw-w64-base.
21:50:22 #15 26.05 Preparing to unpack .../07-gcc-mingw-w64-base_8.3.0-6+21.3~deb10u2_amd64.deb ...
21:50:23 #15 26.07 Unpacking gcc-mingw-w64-base (8.3.0-6+21.3~deb10u2) ...
21:50:23 #15 26.15 Selecting previously unselected package gcc-mingw-w64-x86-64.
21:50:23 #15 26.16 Preparing to unpack .../08-gcc-mingw-w64-x86-64_8.3.0-6+21.3~deb10u2_amd64.deb ...
21:50:23 #15 26.16 Unpacking gcc-mingw-w64-x86-64 (8.3.0-6+21.3~deb10u2) ...
21:50:31 #15 33.69 Selecting previously unselected package g++-mingw-w64-x86-64.
21:50:31 #15 33.70 Preparing to unpack .../09-g++-mingw-w64-x86-64_8.3.0-6+21.3~deb10u2_amd64.deb ...
21:50:31 #15 33.70 Unpacking g++-mingw-w64-x86-64 (8.3.0-6+21.3~deb10u2) ...
21:50:31 #15 ...
21:50:31 
21:50:31 #23 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh containerd
21:50:31 #23 sha256:b1e1c538ca9ad70d045609dd4dc6411ffa6e54cda5ee90788c1b512667b055ea
21:50:31 #23 21.04 Checking out files:  99% (4962/4978)   
Checking out files: 100% (4978/4978)   
Checking out files: 100% (4978/4978), done.
21:50:31 #23 21.07 + cd /tmp/tmp.Al3kviFKNI/src/github.com/containerd/containerd
21:50:31 #23 21.07 + git checkout -q v1.6.8
21:50:32 #23 21.85 + export 'BUILDTAGS=netgo osusergo static_build'
21:50:32 #23 21.86 + BUILDTAGS='netgo osusergo static_build'
21:50:32 #23 21.86 + export EXTRA_FLAGS=-buildmode=pie
21:50:32 #23 21.86 + EXTRA_FLAGS=-buildmode=pie
21:50:32 #23 21.86 + export 'EXTRA_LDFLAGS=-extldflags "-fno-PIC -static"'
21:50:32 #23 21.86 + EXTRA_LDFLAGS='-extldflags "-fno-PIC -static"'
21:50:32 #23 21.86 + '[' '' = dynamic ']'
21:50:32 #23 21.86 + make
21:50:32 #23 22.41 + bin/ctr
21:50:36 #23 ...
21:50:36 
21:50:36 #15 [runtime-dev-cross-false 2/2] RUN --mount=type=cache,sharing=locked,id=moby-cross-false-aptlib,target=/var/lib/apt     --mount=type=cache,sharing=locked,id=moby-cross-false-aptcache,target=/var/cache/apt         apt-get update && apt-get install -y --no-install-recommends             binutils-mingw-w64             g++-mingw-w64-x86-64             libapparmor-dev             libbtrfs-dev             libdevmapper-dev             libseccomp-dev/buster-backports             libsystemd-dev             libudev-dev
21:50:36 #15 sha256:7725ec11f2c306ad36e9ee955d4279b25bf545defe3b6eec52f7ef1cb88874c9
21:50:36 #15 39.23 Selecting previously unselected package libapparmor1:amd64.
21:50:36 #15 39.24 Preparing to unpack .../10-libapparmor1_2.13.2-10_amd64.deb ...
21:50:36 #15 39.24 Unpacking libapparmor1:amd64 (2.13.2-10) ...
21:50:36 #15 39.29 Selecting previously unselected package libapparmor-dev:amd64.
21:50:36 #15 39.29 Preparing to unpack .../11-libapparmor-dev_2.13.2-10_amd64.deb ...
21:50:36 #15 39.30 Unpacking libapparmor-dev:amd64 (2.13.2-10) ...
21:50:36 #15 39.37 Selecting previously unselected package libbtrfs0.
21:50:36 #15 39.37 Preparing to unpack .../12-libbtrfs0_4.20.1-2_amd64.deb ...
21:50:36 #15 39.37 Unpacking libbtrfs0 (4.20.1-2) ...
21:50:36 #15 39.42 Selecting previously unselected package libbtrfs-dev.
21:50:36 #15 39.42 Preparing to unpack .../13-libbtrfs-dev_4.20.1-2_amd64.deb ...
21:50:36 #15 39.42 Unpacking libbtrfs-dev (4.20.1-2) ...
21:50:36 #15 39.50 Selecting previously unselected package libdevmapper-event1.02.1:amd64.
21:50:36 #15 39.51 Preparing to unpack .../14-libdevmapper-event1.02.1_2%3a1.02.155-3_amd64.deb ...
21:50:36 #15 39.52 Unpacking libdevmapper-event1.02.1:amd64 (2:1.02.155-3) ...
21:50:36 #15 39.57 Selecting previously unselected package libudev-dev:amd64.
21:50:36 #15 39.57 Preparing to unpack .../15-libudev-dev_241-7~deb10u8_amd64.deb ...
21:50:36 #15 39.59 Unpacking libudev-dev:amd64 (241-7~deb10u8) ...
21:50:36 #15 39.66 Selecting previously unselected package libsepol1-dev:amd64.
21:50:36 #15 39.67 Preparing to unpack .../16-libsepol1-dev_2.8-1_amd64.deb ...
21:50:36 #15 39.67 Unpacking libsepol1-dev:amd64 (2.8-1) ...
21:50:36 #15 39.84 Selecting previously unselected package libpcre16-3:amd64.
21:50:36 #15 39.84 Preparing to unpack .../17-libpcre16-3_2%3a8.39-12_amd64.deb ...
21:50:36 #15 39.84 Unpacking libpcre16-3:amd64 (2:8.39-12) ...
21:50:36 #15 39.93 Selecting previously unselected package libpcre32-3:amd64.
21:50:36 #15 39.93 Preparing to unpack .../18-libpcre32-3_2%3a8.39-12_amd64.deb ...
21:50:36 #15 39.93 Unpacking libpcre32-3:amd64 (2:8.39-12) ...
21:50:36 #15 40.01 Selecting previously unselected package libpcrecpp0v5:amd64.
21:50:36 #15 40.01 Preparing to unpack .../19-libpcrecpp0v5_2%3a8.39-12_amd64.deb ...
21:50:36 #15 40.01 Unpacking libpcrecpp0v5:amd64 (2:8.39-12) ...
21:50:36 #15 40.07 Selecting previously unselected package libpcre3-dev:amd64.
21:50:37 #15 40.08 Preparing to unpack .../20-libpcre3-dev_2%3a8.39-12_amd64.deb ...
21:50:37 #15 40.08 Unpacking libpcre3-dev:amd64 (2:8.39-12) ...
21:50:37 #15 40.26 Selecting previously unselected package libselinux1-dev:amd64.
21:50:37 #15 40.27 Preparing to unpack .../21-libselinux1-dev_2.8-1+b1_amd64.deb ...
21:50:37 #15 40.27 Unpacking libselinux1-dev:amd64 (2.8-1+b1) ...
21:50:37 #15 40.41 Selecting previously unselected package libdevmapper-dev:amd64.
21:50:37 #15 40.41 Preparing to unpack .../22-libdevmapper-dev_2%3a1.02.155-3_amd64.deb ...
21:50:37 #15 40.41 Unpacking libdevmapper-dev:amd64 (2:1.02.155-3) ...
21:50:37 #15 40.47 Selecting previously unselected package libseccomp-dev:amd64.
21:50:37 #15 40.47 Preparing to unpack .../23-libseccomp-dev_2.5.1-1~bpo10+1_amd64.deb ...
21:50:37 #15 40.48 Unpacking libseccomp-dev:amd64 (2.5.1-1~bpo10+1) ...
21:50:37 #15 40.57 Selecting previously unselected package libsystemd-dev:amd64.
21:50:37 #15 40.58 Preparing to unpack .../24-libsystemd-dev_241-7~deb10u8_amd64.deb ...
21:50:37 #15 40.58 Unpacking libsystemd-dev:amd64 (241-7~deb10u8) ...
21:50:37 #15 40.77 Setting up libpcrecpp0v5:amd64 (2:8.39-12) ...
21:50:37 #15 40.79 Setting up libseccomp-dev:amd64 (2.5.1-1~bpo10+1) ...
21:50:37 #15 40.80 Setting up libapparmor1:amd64 (2.13.2-10) ...
21:50:37 #15 40.81 Setting up binutils-mingw-w64-x86-64 (2.31.1-11+8.3) ...
21:50:37 #15 40.82 Setting up libpcre16-3:amd64 (2:8.39-12) ...
21:50:37 #15 40.83 Setting up libsepol1-dev:amd64 (2.8-1) ...
21:50:37 #15 40.84 Setting up gcc-mingw-w64-base (8.3.0-6+21.3~deb10u2) ...
21:50:37 #15 40.85 Setting up libbtrfs0 (4.20.1-2) ...
21:50:37 #15 40.86 Setting up libpcre32-3:amd64 (2:8.39-12) ...
21:50:37 #15 40.87 Setting up libudev-dev:amd64 (241-7~deb10u8) ...
21:50:37 #15 40.89 Setting up binutils-mingw-w64-i686 (2.31.1-11+8.3) ...
21:50:37 #15 40.90 Setting up libbtrfs-dev (4.20.1-2) ...
21:50:37 #15 40.91 Setting up libapparmor-dev:amd64 (2.13.2-10) ...
21:50:37 #15 40.92 Setting up mingw-w64-common (6.0.0-3) ...
21:50:37 #15 40.93 Setting up libsystemd-dev:amd64 (241-7~deb10u8) ...
21:50:37 #15 40.94 Setting up mingw-w64-x86-64-dev (6.0.0-3) ...
21:50:37 #15 40.96 Setting up libpcre3-dev:amd64 (2:8.39-12) ...
21:50:37 #15 40.97 Setting up gcc-mingw-w64-x86-64 (8.3.0-6+21.3~deb10u2) ...
21:50:37 #15 40.98 update-alternatives: using /usr/bin/x86_64-w64-mingw32-gcc-posix to provide /usr/bin/x86_64-w64-mingw32-gcc (x86_64-w64-mingw32-gcc) in auto mode
21:50:37 #15 40.98 update-alternatives: using /usr/bin/x86_64-w64-mingw32-gcc-win32 to provide /usr/bin/x86_64-w64-mingw32-gcc (x86_64-w64-mingw32-gcc) in auto mode
21:50:37 #15 40.99 Setting up g++-mingw-w64-x86-64 (8.3.0-6+21.3~deb10u2) ...
21:50:37 #15 41.00 update-alternatives: using /usr/bin/x86_64-w64-mingw32-g++-posix to provide /usr/bin/x86_64-w64-mingw32-g++ (x86_64-w64-mingw32-g++) in auto mode
21:50:37 #15 41.00 update-alternatives: using /usr/bin/x86_64-w64-mingw32-g++-win32 to provide /usr/bin/x86_64-w64-mingw32-g++ (x86_64-w64-mingw32-g++) in auto mode
21:50:37 #15 41.01 Setting up binutils-mingw-w64 (2.31.1-11+8.3) ...
21:50:37 #15 41.02 Setting up libselinux1-dev:amd64 (2.8-1+b1) ...
21:50:37 #15 41.03 Setting up libdevmapper1.02.1:amd64 (2:1.02.155-3) ...
21:50:37 #15 41.04 Setting up dmsetup (2:1.02.155-3) ...
21:50:37 #15 41.06 Setting up libdevmapper-event1.02.1:amd64 (2:1.02.155-3) ...
21:50:38 #15 41.06 Setting up libdevmapper-dev:amd64 (2:1.02.155-3) ...
21:50:38 #15 41.08 Processing triggers for libc-bin (2.28-10+deb10u1) ...
21:50:40 #15 DONE 42.9s
21:50:40 
21:50:40 #20 [runc 1/1] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh runc
21:50:40 #20 sha256:86ea02cd393e71271f7010a555c29762c406a9964c4d0f259b6229694f68427f
21:50:40 #20 ...
21:50:40 
21:50:40 #19 [binary-base 1/7] COPY --from=tini        /build/ /usr/local/bin/
21:50:40 #19 sha256:c7501badf2ddaffabc871ba62c14b90e177904b055e50a4d39f3a0014a01c368
21:50:40 #19 DONE 0.2s
21:50:40 
21:50:40 #25 [rootlesskit 1/3] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh rootlesskit
21:50:40 #25 sha256:8f0b123ba866d42bc94bc2935b45d57870bb256f9abc57618df4814dcac62243
21:50:40 #25 44.55 + for f in rootlesskit rootlesskit-docker-proxy
21:50:40 #25 44.55 + GOBIN=/build
21:50:40 #25 44.55 + GO111MODULE=on
21:50:40 #25 44.55 + go install -ldflags= github.com/rootless-containers/rootlesskit/cmd/rootlesskit-docker-proxy@v0.14.4
21:50:43 #25 DONE 47.8s
21:50:43 
21:50:43 #20 [runc 1/1] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh runc
21:50:43 #20 sha256:86ea02cd393e71271f7010a555c29762c406a9964c4d0f259b6229694f68427f
21:50:43 #20 0.839 + RM_GOPATH=0
21:50:43 #20 0.839 + TMP_GOPATH=
21:50:43 #20 0.839 + : /build
21:50:43 #20 0.839 + '[' -z '' ']'
21:50:43 #20 0.840 ++ mktemp -d
21:50:43 #20 0.841 + export GOPATH=/tmp/tmp.x4znmetDCk
21:50:43 #20 0.841 + GOPATH=/tmp/tmp.x4znmetDCk
21:50:43 #20 0.841 + RM_GOPATH=1
21:50:43 #20 0.841 + case "$(go env GOARCH)" in
21:50:43 #20 0.841 ++ go env GOARCH
21:50:43 #20 0.848 + export GO_BUILDMODE=-buildmode=pie
21:50:43 #20 0.848 + GO_BUILDMODE=-buildmode=pie
21:50:43 #20 0.849 ++ dirname /tmp/install/install.sh
21:50:43 #20 0.850 Install runc version v1.1.4 (build tags: seccomp)
21:50:43 #20 0.850 + dir=/tmp/install
21:50:43 #20 0.850 + bin=runc
21:50:43 #20 0.850 + shift
21:50:43 #20 0.850 + '[' '!' -f /tmp/install/runc.installer ']'
21:50:43 #20 0.850 + . /tmp/install/runc.installer
21:50:43 #20 0.850 ++ set -e
21:50:43 #20 0.850 ++ : v1.1.4
21:50:43 #20 0.850 + install_runc
21:50:43 #20 0.850 + RUNC_BUILDTAGS=seccomp
21:50:43 #20 0.850 + echo 'Install runc version v1.1.4 (build tags: seccomp)'
21:50:43 #20 0.850 + git clone https://github.com/opencontainers/runc.git /tmp/tmp.x4znmetDCk/src/github.com/opencontainers/runc
21:50:43 #20 0.852 Cloning into '/tmp/tmp.x4znmetDCk/src/github.com/opencontainers/runc'...
21:50:43 #20 ...
21:50:43 
21:50:43 #26 [rootlesskit 2/3] COPY ./contrib/dockerd-rootless.sh /build
21:50:43 #26 sha256:f164e1927fc74d8e98bf0f4a03b7ca4aa87d084089fffdd1a0a1a29edf7917f9
21:50:43 #26 DONE 0.1s
21:50:43 
21:50:43 #27 [rootlesskit 3/3] COPY ./contrib/dockerd-rootless-setuptool.sh /build
21:50:43 #27 sha256:bffb6f1477c24a4968a74d487c86a4f344cb26d11e00f33ccc6decaca798426a
21:50:43 #27 DONE 0.1s
21:50:43 
21:50:43 #20 [runc 1/1] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh runc
21:50:43 #20 sha256:86ea02cd393e71271f7010a555c29762c406a9964c4d0f259b6229694f68427f
21:50:45 #20 4.999 + cd /tmp/tmp.x4znmetDCk/src/github.com/opencontainers/runc
21:50:45 #20 4.999 + git checkout -q v1.1.4
21:50:45 #20 5.318 + '[' -z '' ']'
21:50:45 #20 5.318 + target=static
21:50:45 #20 5.318 + make BUILDTAGS=seccomp static
21:50:45 #20 5.480 CGO_ENABLED=1 go build -trimpath  -tags "seccomp netgo osusergo" -ldflags "-extldflags -static -X main.gitCommit=v1.1.4-0-g5fd4c4d1 -X main.version=1.1.4 " -o runc .
21:51:53 #20 68.63 + mkdir -p /build
21:51:53 #20 68.63 + cp runc /build/runc
21:51:53 #20 DONE 69.2s
21:51:53 
21:51:53 #23 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh containerd
21:51:53 #23 sha256:b1e1c538ca9ad70d045609dd4dc6411ffa6e54cda5ee90788c1b512667b055ea
21:51:53 #23 ...
21:51:53 
21:51:53 #21 [binary-base 2/7] COPY --from=runc        /build/ /usr/local/bin/
21:51:53 #21 sha256:7f68352a0b9d5dafc98132036f7eafa745344e5a6ca7b330029b07b224305fbf
21:51:53 #21 DONE 0.3s
21:51:53 
21:51:53 #23 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh containerd
21:51:53 #23 sha256:b1e1c538ca9ad70d045609dd4dc6411ffa6e54cda5ee90788c1b512667b055ea
21:52:08 #23 116.1 + bin/containerd
21:53:04 #23 167.6 # github.com/containerd/containerd/cmd/containerd
21:53:04 #23 167.6 /usr/bin/ld: /tmp/go-link-492855137/000019.o: in function `New':
21:53:04 #23 167.6 /tmp/tmp.Al3kviFKNI/src/github.com/containerd/containerd/vendor/github.com/miekg/pkcs11/pkcs11.go:77: warning: Using 'dlopen' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
21:53:04 #23 167.7 + bin/containerd-stress
21:53:04 #23 168.8 + bin/containerd-shim
21:53:10 #23 179.8 + bin/containerd-shim-runc-v1
21:53:16 #23 186.1 + bin/containerd-shim-runc-v2
21:53:17 #23 186.9 + binaries
21:53:17 #23 186.9 + install -D bin/containerd /build/containerd
21:53:17 #23 186.9 + install -D bin/containerd-shim /build/containerd-shim
21:53:17 #23 186.9 + install -D bin/containerd-shim-runc-v2 /build/containerd-shim-runc-v2
21:53:17 #23 186.9 + install -D bin/ctr /build/ctr
21:53:19 #23 DONE 189.1s
21:53:20 
21:53:20 #24 [binary-base 3/7] COPY --from=containerd  /build/ /usr/local/bin/
21:53:20 #24 sha256:117d0c4629035e9445bd9f10178a6db67854627ddad12da15389ece4a7e2feeb
21:53:21 #24 DONE 0.8s
21:53:21 
21:53:21 #28 [binary-base 4/7] COPY --from=rootlesskit /build/ /usr/local/bin/
21:53:21 #28 sha256:f4aaa8b2a92a770f613bb4c961ddce5a43a0e1e7f4e3f05b42d5b5b3ccd4b56e
21:53:21 #28 DONE 0.2s
21:53:21 
21:53:21 #30 [binary-base 5/7] COPY --from=proxy       /build/ /usr/local/bin/
21:53:21 #30 sha256:1d68c8e9d6a98d7f276028f583c6c3bb007c2cb97b2e7c00456a791bb4a6bd69
21:53:21 #30 DONE 0.1s
21:53:21 
21:53:21 #35 [binary-base 6/7] COPY --from=vpnkit      /build/ /usr/local/bin/
21:53:21 #35 sha256:136068a1e2333c9ee1ef3ea6c56e6a37632b625c14e7310a30d0caa157a84b25
21:53:22 #35 DONE 0.8s
21:53:22 
21:53:22 #36 [binary-base 7/7] WORKDIR /go/src/github.com/docker/docker
21:53:22 #36 sha256:fc56bed428716907042d6e89c045f8a87b56d30e00385b68b68569a641e0b153
21:53:22 #36 DONE 0.0s
21:53:22 
21:53:22 #37 [build-binary 1/1] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=bind,target=/go/src/github.com/docker/docker         hack/make.sh binary
21:53:22 #37 sha256:098d5b19c1f1bf1055ddcfe56b9d8b8fbe343cf7a7d5af25b40de8f93a2065f9
21:53:22 #37 0.323 
21:53:22 #37 0.384 Removing /build/bundles/
21:53:22 #37 0.385 
21:53:22 #37 0.389 ---> Making bundle: binary (in /build/bundles/binary)
21:53:22 #37 0.417 Building: /build/bundles/binary-daemon/dockerd-0.0.0-20220826142901-2484f7e
21:53:22 #37 0.417 GOOS="" GOARCH="" GOARM=""
21:54:59 #37 83.44 Created binary: /build/bundles/binary-daemon/dockerd-0.0.0-20220826142901-2484f7e
21:54:59 #37 83.86 Copying nested executables into /build/bundles/binary-daemon
21:54:59 #37 85.08 
21:54:59 #37 DONE 87.3s
21:54:59 
21:54:59 #38 [binary 1/1] COPY --from=build-binary /build/bundles/ /
21:54:59 #38 sha256:eb41717c79879c27b0ce1a2a6543a2942c9b4be97770529419b394a38b5672c4
21:54:59 #38 DONE 2.0s
21:54:59 
21:54:59 #39 exporting to client
21:54:59 #39 sha256:b60a1292d407630dbb741f28ab6ea4ce3cca872ac28eeee56f4e66a182eca4bc
21:54:59 #39 copying files 21.18MB 0.1s
21:54:59 #39 copying files 202.98MB 1.1s done
21:54:59 #39 DONE 1.1s
21:54:59 make[2]: Leaving directory '/home/ubuntu/workspace/docker-ce-packaging_20.10/src/github.com/docker/docker'
21:54:59 mkdir -p build/linux/docker
21:54:59 cp /home/ubuntu/workspace/docker-ce-packaging_20.10/src/github.com/docker/cli/build/docker build/linux/docker/
21:54:59 for f in dockerd containerd ctr containerd-shim containerd-shim-runc-v2 docker-init docker-proxy runc; do \
21:54:59 	cp -L /home/ubuntu/workspace/docker-ce-packaging_20.10/src/github.com/docker/docker/bundles/binary-daemon/$f build/linux/docker/$f; \
21:54:59 done
21:54:59 tar -C build/linux -c -z -f build/linux/docker-0.0.0-20220826142901-2484f7e.tgz docker
21:55:03 # extra binaries for running rootless
21:55:03 mkdir -p build/linux/docker-rootless-extras
21:55:03 for f in rootlesskit rootlesskit-docker-proxy dockerd-rootless.sh dockerd-rootless-setuptool.sh vpnkit; do \
21:55:03 	if [ -f /home/ubuntu/workspace/docker-ce-packaging_20.10/src/github.com/docker/docker/bundles/binary-daemon/$f ]; then \
21:55:03 		cp -L /home/ubuntu/workspace/docker-ce-packaging_20.10/src/github.com/docker/docker/bundles/binary-daemon/$f build/linux/docker-rootless-extras/$f; \
21:55:03 	fi \
21:55:03 done
21:55:03 tar -C build/linux -c -z -f build/linux/docker-rootless-extras-0.0.0-20220826142901-2484f7e.tgz docker-rootless-extras
21:55:06 make[1]: Leaving directory '/home/ubuntu/workspace/docker-ce-packaging_20.10/static'