Skip to content
[Jenkins]Jenkins
log in

Console Output

Skipping 388 KB.. Full Log
IIRX6luUmpRW1rpspyT3nQDTUNCDjP3wUAaq5oLPIAAAA=#15 0.705 Hit:1 http://archive.raspbian.org/raspbian bookworm InRelease
16:27:45 #15 0.832 Reading package lists...
16:27:45 #15 2.231 W: http://archive.raspbian.org/raspbian/dists/bookworm/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
16:27:45 #15 2.561 dpkg-buildpackage: info: source package docker-ce-build-deps
16:27:45 #15 2.561 dpkg-buildpackage: info: source version 1.0
16:27:45 #15 2.561 dpkg-buildpackage: info: source distribution unstable
16:27:45 #15 2.561 dpkg-buildpackage: info: source changed by Equivs Dummy Package Generator <root@localhost>
16:27:45 #15 2.607  dpkg-source --before-build .
16:27:45 #15 2.607 dpkg-buildpackage: info: host architecture armhf
16:27:45 #15 2.725  debian/rules clean
16:27:45 #15 2.727 dh clean
16:27:45 #15 2.822    dh_clean
16:27:45 #15 2.861  debian/rules binary
16:27:45 #15 2.863 dh binary
16:27:45 #15 2.945    dh_update_autotools_config
16:27:45 #15 2.978    dh_autoreconf
16:27:45 #15 3.025    create-stamp debian/debhelper-build-stamp
16:27:45 #15 3.025    dh_prep
16:27:45 #15 3.058    dh_auto_install --destdir=debian/docker-ce-build-deps/
16:27:45 #15 3.116    dh_install
16:27:46 #15 3.156    dh_installdocs
16:27:46 #15 3.200    dh_installchangelogs
16:27:46 #15 3.301    dh_perl
16:27:46 #15 3.343    dh_link
16:27:46 #15 3.383    dh_strip_nondeterminism
16:27:46 #15 3.460    dh_compress
16:27:46 #15 3.508    dh_fixperms
16:27:46 #15 3.554    dh_missing
16:27:46 #15 3.585    dh_installdeb
16:27:46 #15 3.624    dh_gencontrol
16:27:46 #15 3.761    dh_md5sums
16:27:46 #15 3.807    dh_builddeb
16:27:46 #15 3.839 dpkg-deb: building package 'docker-ce-build-deps' in '../docker-ce-build-deps_1.0_all.deb'.
16:27:46 #15 3.857  dpkg-genbuildinfo --build=binary -O../docker-ce-build-deps_1.0_armhf.buildinfo
16:27:46 #15 4.017  dpkg-genchanges --build=binary -O../docker-ce-build-deps_1.0_armhf.changes
16:27:47 #15 4.108 dpkg-genchanges: info: binary-only upload (no source code included)
16:27:47 #15 4.110  dpkg-source --after-build .
16:27:47 #15 4.228 dpkg-buildpackage: info: binary-only upload (no source included)
16:27:47 #15 4.232 
16:27:47 #15 4.232 The package has been created.
16:27:47 #15 4.232 Attention, the package has been created in the current directory,
16:27:47 #15 4.232 not in ".." as indicated by the message above!
16:27:47 #15 4.253 Selecting previously unselected package docker-ce-build-deps.
16:27:47 #15 4.266 (Reading database ... 17884 files and directories currently installed.)
16:27:47 #15 4.267 Preparing to unpack docker-ce-build-deps_1.0_all.deb ...
16:27:47 #15 4.271 Unpacking docker-ce-build-deps (1.0) ...
16:27:48 #15 4.410 Reading package lists...
16:27:48 #15 5.776 Building dependency tree...
16:27:48 #15 5.997 Reading state information...
16:27:48 #15 6.005 Correcting dependencies...Starting pkgProblemResolver with broken count: 0
16:27:49 #15 6.300 Starting 2 pkgProblemResolver with broken count: 0
16:27:49 #15 6.304 Done
16:27:49 #15 6.527  Done
16:27:49 #15 6.763 Starting pkgProblemResolver with broken count: 0
16:27:49 #15 6.807 Starting 2 pkgProblemResolver with broken count: 0
16:27:49 #15 6.811 Done
16:27:49 #15 7.222 The following additional packages will be installed:
16:27:50 #15 7.222   bash-completion build-essential cmake cmake-data dh-apparmor g++ g++-12
16:27:50 #15 7.223   libarchive13 libjsoncpp25 libltdl-dev libltdl7 libpkgconf3 librhash0
16:27:50 #15 7.223   libseccomp-dev libstdc++-12-dev libsystemd-dev libsystemd0 libudev1 libuv1
16:27:50 #15 7.223   pkg-config pkgconf pkgconf-bin udev
16:27:50 #15 7.225 Suggested packages:
16:27:50 #15 7.225   cmake-doc cmake-format elpa-cmake-mode ninja-build apparmor-utils gcc-12-doc
16:27:50 #15 7.225   lrzip libtool-doc seccomp libstdc++-12-doc
16:27:50 #15 7.611 The following NEW packages will be installed:
16:27:50 #15 7.611   bash-completion build-essential cmake cmake-data dh-apparmor g++ g++-12
16:27:50 #15 7.611   libarchive13 libjsoncpp25 libltdl-dev libltdl7 libpkgconf3 librhash0
16:27:50 #15 7.612   libseccomp-dev libstdc++-12-dev libsystemd-dev libuv1 pkg-config pkgconf
16:27:50 #15 7.612   pkgconf-bin
16:27:50 #15 7.613 The following packages will be upgraded:
16:27:50 #15 7.614   libsystemd0 libudev1 udev
16:27:51 #15 8.112 3 upgraded, 20 newly installed, 0 to remove and 23 not upgraded.
16:27:51 #15 8.112 1 not fully installed or removed.
16:27:51 #15 8.112 Need to get 19.8 MB of archives.
16:27:51 #15 8.112 After this operation, 85.5 MB of additional disk space will be used.
16:27:51 #15 8.112 Get:1 http://archive.raspbian.org/raspbian bookworm/main armhf libstdc++-12-dev armhf 12.2.0-14+rpi1 [2027 kB]
16:27:51 #15 9.018 Get:2 http://archive.raspbian.org/raspbian bookworm/main armhf g++-12 armhf 12.2.0-14+rpi1 [7914 kB]
16:27:52 #15 9.487 Get:3 http://archive.raspbian.org/raspbian bookworm/main armhf g++ armhf 4:12.2.0-3+rpi1 [1344 B]
16:27:52 #15 9.489 Get:4 http://archive.raspbian.org/raspbian bookworm/main armhf build-essential armhf 12.9 [7704 B]
16:27:52 #15 9.489 Get:5 http://archive.raspbian.org/raspbian bookworm/main armhf bash-completion all 1:2.11-6 [234 kB]
16:27:52 #15 9.586 Get:6 http://archive.raspbian.org/raspbian bookworm/main armhf libarchive13 armhf 3.6.2-1 [293 kB]
16:27:52 #15 9.587 Get:7 http://archive.raspbian.org/raspbian bookworm/main armhf libjsoncpp25 armhf 1.9.5-4 [66.7 kB]
16:27:52 #15 9.589 Get:8 http://archive.raspbian.org/raspbian bookworm/main armhf librhash0 armhf 1.4.3-3 [142 kB]
16:27:52 #15 9.590 Get:9 http://archive.raspbian.org/raspbian bookworm/main armhf libuv1 armhf 1.44.2-1+rpi1 [125 kB]
16:27:52 #15 9.591 Get:10 http://archive.raspbian.org/raspbian bookworm/main armhf cmake-data all 3.25.1-1 [2026 kB]
16:27:52 #15 9.705 Get:11 http://archive.raspbian.org/raspbian bookworm/main armhf cmake armhf 3.25.1-1 [3859 kB]
16:27:52 #15 9.937 Get:12 http://archive.raspbian.org/raspbian bookworm/main armhf dh-apparmor all 3.0.8-3 [16.7 kB]
16:27:52 #15 9.938 Get:13 http://archive.raspbian.org/raspbian bookworm/main armhf libltdl7 armhf 2.4.7-5 [390 kB]
16:27:52 #15 10.04 Get:14 http://archive.raspbian.org/raspbian bookworm/main armhf libltdl-dev armhf 2.4.7-5 [161 kB]
16:27:52 #15 10.04 Get:15 http://archive.raspbian.org/raspbian bookworm/main armhf libseccomp-dev armhf 2.5.4-1+rpi1+b1 [86.6 kB]
16:27:52 #15 10.04 Get:16 http://archive.raspbian.org/raspbian bookworm/main armhf libsystemd0 armhf 252.17-1~deb12u1+rpi1 [299 kB]
16:27:52 #15 10.04 Get:17 http://archive.raspbian.org/raspbian bookworm/main armhf libsystemd-dev armhf 252.17-1~deb12u1+rpi1 [353 kB]
16:27:52 #15 10.05 Get:18 http://archive.raspbian.org/raspbian bookworm/main armhf libpkgconf3 armhf 1.8.1-1 [31.3 kB]
16:27:52 #15 10.05 Get:19 http://archive.raspbian.org/raspbian bookworm/main armhf pkgconf-bin armhf 1.8.1-1 [27.8 kB]
16:27:52 #15 10.05 Get:20 http://archive.raspbian.org/raspbian bookworm/main armhf pkgconf armhf 1.8.1-1 [25.9 kB]
16:27:52 #15 10.05 Get:21 http://archive.raspbian.org/raspbian bookworm/main armhf pkg-config armhf 1.8.1-1 [13.7 kB]
16:27:52 #15 10.17 Get:22 http://archive.raspbian.org/raspbian bookworm/main armhf udev armhf 252.17-1~deb12u1+rpi1 [1584 kB]
16:27:53 #15 10.17 Get:23 http://archive.raspbian.org/raspbian bookworm/main armhf libudev1 armhf 252.17-1~deb12u1+rpi1 [99.3 kB]
16:27:53 #15 10.47 debconf: delaying package configuration, since apt-utils is not installed
16:27:53 #15 10.51 Fetched 19.8 MB in 3s (7451 kB/s)
16:27:53 #15 10.53 Selecting previously unselected package libstdc++-12-dev:armhf.
16:27:53 #15 10.53 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17888 files and directories currently installed.)
16:27:53 #15 10.55 Preparing to unpack .../00-libstdc++-12-dev_12.2.0-14+rpi1_armhf.deb ...
16:27:53 #15 10.55 Unpacking libstdc++-12-dev:armhf (12.2.0-14+rpi1) ...
16:27:53 #15 10.78 Selecting previously unselected package g++-12.
16:27:53 #15 10.79 Preparing to unpack .../01-g++-12_12.2.0-14+rpi1_armhf.deb ...
16:27:53 #15 10.79 Unpacking g++-12 (12.2.0-14+rpi1) ...
16:27:54 #15 11.46 Selecting previously unselected package g++.
16:27:54 #15 11.47 Preparing to unpack .../02-g++_4%3a12.2.0-3+rpi1_armhf.deb ...
16:27:54 #15 11.47 Unpacking g++ (4:12.2.0-3+rpi1) ...
16:27:54 #15 11.50 Selecting previously unselected package build-essential.
16:27:54 #15 11.50 Preparing to unpack .../03-build-essential_12.9_armhf.deb ...
16:27:54 #15 11.50 Unpacking build-essential (12.9) ...
16:27:54 #15 11.54 Selecting previously unselected package bash-completion.
16:27:54 #15 11.54 Preparing to unpack .../04-bash-completion_1%3a2.11-6_all.deb ...
16:27:54 #15 11.55 Unpacking bash-completion (1:2.11-6) ...
16:27:54 #15 11.69 Selecting previously unselected package libarchive13:armhf.
16:27:54 #15 11.69 Preparing to unpack .../05-libarchive13_3.6.2-1_armhf.deb ...
16:27:54 #15 11.70 Unpacking libarchive13:armhf (3.6.2-1) ...
16:27:54 #15 11.75 Selecting previously unselected package libjsoncpp25:armhf.
16:27:54 #15 11.76 Preparing to unpack .../06-libjsoncpp25_1.9.5-4_armhf.deb ...
16:27:54 #15 11.76 Unpacking libjsoncpp25:armhf (1.9.5-4) ...
16:27:54 #15 11.80 Selecting previously unselected package librhash0:armhf.
16:27:54 #15 11.80 Preparing to unpack .../07-librhash0_1.4.3-3_armhf.deb ...
16:27:54 #15 11.80 Unpacking librhash0:armhf (1.4.3-3) ...
16:27:54 #15 11.85 Selecting previously unselected package libuv1:armhf.
16:27:54 #15 11.85 Preparing to unpack .../08-libuv1_1.44.2-1+rpi1_armhf.deb ...
16:27:54 #15 11.86 Unpacking libuv1:armhf (1.44.2-1+rpi1) ...
16:27:54 #15 11.91 Selecting previously unselected package cmake-data.
16:27:54 #15 11.91 Preparing to unpack .../09-cmake-data_3.25.1-1_all.deb ...
16:27:54 #15 11.92 Unpacking cmake-data (3.25.1-1) ...
16:27:55 #15 12.36 Selecting previously unselected package cmake.
16:27:55 #15 12.36 Preparing to unpack .../10-cmake_3.25.1-1_armhf.deb ...
16:27:55 #15 12.37 Unpacking cmake (3.25.1-1) ...
16:27:55 #15 12.76 Selecting previously unselected package dh-apparmor.
16:27:55 #15 12.76 Preparing to unpack .../11-dh-apparmor_3.0.8-3_all.deb ...
16:27:55 #15 12.77 Unpacking dh-apparmor (3.0.8-3) ...
16:27:55 #15 12.80 Selecting previously unselected package libltdl7:armhf.
16:27:55 #15 12.80 Preparing to unpack .../12-libltdl7_2.4.7-5_armhf.deb ...
16:27:55 #15 12.81 Unpacking libltdl7:armhf (2.4.7-5) ...
16:27:55 #15 12.84 Selecting previously unselected package libltdl-dev:armhf.
16:27:55 #15 12.84 Preparing to unpack .../13-libltdl-dev_2.4.7-5_armhf.deb ...
16:27:55 #15 12.85 Unpacking libltdl-dev:armhf (2.4.7-5) ...
16:27:55 #15 12.89 Selecting previously unselected package libseccomp-dev:armhf.
16:27:55 #15 12.89 Preparing to unpack .../14-libseccomp-dev_2.5.4-1+rpi1+b1_armhf.deb ...
16:27:55 #15 12.90 Unpacking libseccomp-dev:armhf (2.5.4-1+rpi1+b1) ...
16:27:55 #15 12.94 Preparing to unpack .../15-libsystemd0_252.17-1~deb12u1+rpi1_armhf.deb ...
16:27:55 #15 12.95 Unpacking libsystemd0:armhf (252.17-1~deb12u1+rpi1) over (252.6-1+rpi1) ...
16:27:55 #15 13.03 Setting up libsystemd0:armhf (252.17-1~deb12u1+rpi1) ...
16:27:55 #15 13.06 Selecting previously unselected package libsystemd-dev:armhf.
16:27:55 #15 13.06 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 22895 files and directories currently installed.)
16:27:55 #15 13.08 Preparing to unpack .../0-libsystemd-dev_252.17-1~deb12u1+rpi1_armhf.deb ...
16:27:55 #15 13.08 Unpacking libsystemd-dev:armhf (252.17-1~deb12u1+rpi1) ...
16:27:55 #15 13.16 Selecting previously unselected package libpkgconf3:armhf.
16:27:56 #15 13.16 Preparing to unpack .../1-libpkgconf3_1.8.1-1_armhf.deb ...
16:27:56 #15 13.17 Unpacking libpkgconf3:armhf (1.8.1-1) ...
16:27:56 #15 13.20 Selecting previously unselected package pkgconf-bin.
16:27:56 #15 13.20 Preparing to unpack .../2-pkgconf-bin_1.8.1-1_armhf.deb ...
16:27:56 #15 13.21 Unpacking pkgconf-bin (1.8.1-1) ...
16:27:56 #15 13.24 Selecting previously unselected package pkgconf:armhf.
16:27:56 #15 13.25 Preparing to unpack .../3-pkgconf_1.8.1-1_armhf.deb ...
16:27:56 #15 13.25 Unpacking pkgconf:armhf (1.8.1-1) ...
16:27:56 #15 13.29 Selecting previously unselected package pkg-config:armhf.
16:27:56 #15 13.29 Preparing to unpack .../4-pkg-config_1.8.1-1_armhf.deb ...
16:27:56 #15 13.30 Unpacking pkg-config:armhf (1.8.1-1) ...
16:27:56 #15 13.34 Preparing to unpack .../5-udev_252.17-1~deb12u1+rpi1_armhf.deb ...
16:27:56 #15 13.35 Unpacking udev (252.17-1~deb12u1+rpi1) over (252.6-1+rpi1) ...
16:27:56 #15 13.72 Preparing to unpack .../6-libudev1_252.17-1~deb12u1+rpi1_armhf.deb ...
16:27:56 #15 13.73 Unpacking libudev1:armhf (252.17-1~deb12u1+rpi1) over (252.6-1+rpi1) ...
16:27:56 #15 13.78 Setting up libudev1:armhf (252.17-1~deb12u1+rpi1) ...
16:27:56 #15 13.81 Setting up libseccomp-dev:armhf (2.5.4-1+rpi1+b1) ...
16:27:56 #15 13.82 Setting up libstdc++-12-dev:armhf (12.2.0-14+rpi1) ...
16:27:56 #15 13.83 Setting up libarchive13:armhf (3.6.2-1) ...
16:27:56 #15 13.84 Setting up libpkgconf3:armhf (1.8.1-1) ...
16:27:56 #15 13.85 Setting up libuv1:armhf (1.44.2-1+rpi1) ...
16:27:56 #15 13.87 Setting up bash-completion (1:2.11-6) ...
16:27:56 #15 13.89 Setting up udev (252.17-1~deb12u1+rpi1) ...
16:27:57 #15 14.62 invoke-rc.d: could not determine current runlevel
16:27:57 #15 14.63 invoke-rc.d: policy-rc.d denied execution of restart.
16:27:57 #15 14.64 Setting up libjsoncpp25:armhf (1.9.5-4) ...
16:27:57 #15 14.65 Setting up pkgconf-bin (1.8.1-1) ...
16:27:57 #15 14.66 Setting up libltdl7:armhf (2.4.7-5) ...
16:27:57 #15 14.67 Setting up librhash0:armhf (1.4.3-3) ...
16:27:57 #15 14.68 Setting up cmake-data (3.25.1-1) ...
16:27:57 #15 14.69 Setting up dh-apparmor (3.0.8-3) ...
16:27:57 #15 14.70 Setting up libsystemd-dev:armhf (252.17-1~deb12u1+rpi1) ...
16:27:57 #15 14.72 Setting up g++-12 (12.2.0-14+rpi1) ...
16:27:57 #15 14.73 Setting up pkgconf:armhf (1.8.1-1) ...
16:27:57 #15 14.74 Setting up libltdl-dev:armhf (2.4.7-5) ...
16:27:57 #15 14.75 Setting up pkg-config:armhf (1.8.1-1) ...
16:27:57 #15 14.76 Setting up g++ (4:12.2.0-3+rpi1) ...
16:27:57 #15 14.77 update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
16:27:57 #15 14.78 Setting up cmake (3.25.1-1) ...
16:27:57 #15 14.79 Setting up build-essential (12.9) ...
16:27:57 #15 14.80 Setting up docker-ce-build-deps (1.0) ...
16:27:57 #15 14.81 Processing triggers for man-db (2.11.2-2) ...
16:27:57 #15 14.90 Processing triggers for libc-bin (2.36-9+rpi1+deb12u4) ...
16:27:57 #15 DONE 15.2s
16:27:58 
16:27:58 #16 [stage-1 5/8] COPY --link sources/ /sources
16:27:58 #16 DONE 0.1s
16:27:58 
16:27:58 #17 [stage-1 6/8] COPY --link --from=golang /usr/local/go /usr/local/go
16:28:02 #17 DONE 4.3s
16:28:02 
16:28:02 #18 [stage-1 7/8] WORKDIR /root/build-deb
16:28:02 #18 DONE 0.0s
16:28:02 
16:28:02 #19 [stage-1 8/8] COPY build-deb /root/build-deb/build-deb
16:28:02 #19 DONE 0.0s
16:28:02 
16:28:02 #20 exporting to image
16:28:02 #20 exporting layers
16:28:07 #20 exporting layers 5.2s done
16:28:07 #20 writing image sha256:a370435df6895acce5b3755f6390402471bef20267aa23ce47c14e3645bf7ce0 done
16:28:07 #20 naming to docker.io/debbuild-raspbian-bookworm/aarch64 done
16:28:07 #20 DONE 5.2s
16:28:07 docker run --rm -e PLATFORM -e EPOCH='5' -e DEB_VERSION=0.0.0~20240314122039.4e9abfe -e VERSION=0.0.0-20240314122039-4e9abfe -e CLI_GITCOMMIT=4e9abfe -e ENGINE_GITCOMMIT=979f03f -e BUILDX_VERSION=v0.13.1 -e BUILDX_DEB_VERSION=0.13.1 -e BUILDX_GITCOMMIT=7884339 -e COMPOSE_VERSION=v2.24.7 -e COMPOSE_DEB_VERSION=2.24.7 -v /home/ubuntu/workspace/docker-ce-packaging_PR-1003/deb/debbuild/raspbian-bookworm:/build  debbuild-raspbian-bookworm/aarch64
16:28:08 + set -e
16:28:08 + mkdir -p /root/build-deb/engine
16:28:08 + tar -C /root/build-deb -xzf /sources/engine.tgz
16:28:08 + mkdir -p /root/build-deb/cli
16:28:08 + tar -C /root/build-deb -xzf /sources/cli.tgz
16:28:08 + mkdir -p /root/build-deb/buildx
16:28:08 + tar -C /root/build-deb -xzf /sources/buildx.tgz
16:28:09 + mkdir -p /root/build-deb/compose
16:28:09 + tar -C /root/build-deb -xzf /sources/compose.tgz
16:28:09 + mkdir -p /go/src/github.com/docker
16:28:09 + ln -snf /root/build-deb/engine /go/src/github.com/docker/docker
16:28:09 + ln -snf /root/build-deb/cli /go/src/github.com/docker/cli
16:28:09 + ln -snf /root/build-deb/buildx /go/src/github.com/docker/buildx
16:28:09 + ln -snf /root/build-deb/compose /go/src/github.com/docker/compose
16:28:09 + EPOCH=5
16:28:09 + EPOCH_SEP=
16:28:09 + [[ ! -z 5 ]]
16:28:09 + EPOCH_SEP=:
16:28:09 + [[ -z 0.0.0~20240314122039.4e9abfe ]]
16:28:09 + echo VERSION AAA 0.0.0-20240314122039-4e9abfe
16:28:09 VERSION AAA 0.0.0-20240314122039-4e9abfe
16:28:09 + VERSION=0.0.0-20240314122039-4e9abfe
16:28:09 + echo VERSION bbb 0.0.0-20240314122039-4e9abfe
16:28:09 VERSION bbb 0.0.0-20240314122039-4e9abfe
16:28:09 ++ awk -F ': ' '$1 == "Source" { print $2; exit }' debian/control
16:28:09 + debSource=docker-ce
16:28:09 ++ awk -F ': ' '$1 == "Maintainer" { print $2; exit }' debian/control
16:28:09 + debMaintainer='Docker <support@docker.com>'
16:28:09 ++ date --rfc-2822
16:28:09 + debDate='Fri, 15 Mar 2024 16:28:09 +0000'
16:28:09 + pkgRevision=1
16:28:09 + cat
16:28:09 + export CLI_GITCOMMIT=4e9abfe
16:28:09 + CLI_GITCOMMIT=4e9abfe
16:28:09 + export ENGINE_GITCOMMIT=979f03f
16:28:09 + ENGINE_GITCOMMIT=979f03f
16:28:09 + echo VERSION BBB 0.0.0-20240314122039-4e9abfe
16:28:09 VERSION BBB 0.0.0-20240314122039-4e9abfe
16:28:09 + dpkg-buildpackage -uc -us -I.git
16:28:09 dpkg-buildpackage: info: source package docker-ce
16:28:09 dpkg-buildpackage: info: source version 5:0.0.0~20240314122039.4e9abfe-1~raspbian.12~bookworm
16:28:09 dpkg-buildpackage: info: source distribution bookworm
16:28:09 dpkg-buildpackage: info: source changed by Docker <support@docker.com>
16:28:09  dpkg-source -I.git --before-build .
16:28:09 dpkg-buildpackage: info: host architecture armhf
16:28:10  debian/rules clean
16:28:10 dh clean --with=bash-completion
16:28:10    dh_clean
16:28:10  dpkg-source -I.git -b .
16:28:10 dpkg-source: warning: native package version may not have a revision
16:28:10 dpkg-source: warning: source directory 'build-deb' is not <sourcepackage>-<upstreamversion> 'docker-ce-0.0.0~20240314122039.4e9abfe'
16:28:10 dpkg-source: info: using source format '1.0'
16:28:10 dpkg-source: info: building docker-ce in docker-ce_0.0.0~20240314122039.4e9abfe-1~raspbian.12~bookworm.tar.gz
16:28:32 dpkg-source: info: building docker-ce in docker-ce_0.0.0~20240314122039.4e9abfe-1~raspbian.12~bookworm.dsc
16:28:32  debian/rules build
16:28:32 dh build --with=bash-completion
16:28:32    dh_update_autotools_config
16:28:32    dh_autoreconf
16:28:32    debian/rules override_dh_auto_build
16:28:32 make[1]: Entering directory '/root/build-deb'
16:28:32 # Build the daemon and dependencies
16:28:32 cd engine && DOCKER_GITCOMMIT=979f03f PRODUCT=docker ./hack/make.sh dynbinary
16:28:32 
16:28:32 Removing bundles/
16:28:32 
16:28:32 ---> Making bundle: dynbinary (in bundles/dynbinary)
16:28:32 Building dynamic bundles/dynbinary-daemon/dockerd (linux/arm/v6)...
16:28:32 + tee /root/build-deb/engine/go.mod
16:28:32 module github.com/docker/docker
16:28:32 
16:28:32 go 1.21
16:28:32 + trap 'rm -f "${ROOTDIR}/go.mod"' EXIT
16:28:32 + GO111MODULE=on
16:28:32 + GOTOOLCHAIN=local
16:28:32 + go build -mod=vendor -modfile=vendor.mod -o bundles/dynbinary-daemon/dockerd -tags ' journald' -buildmode=pie -ldflags '-w -X "github.com/docker/docker/dockerversion.Version=0.0.0-20240314122039-4e9abfe" -X "github.com/docker/docker/dockerversion.GitCommit=979f03f" -X "github.com/docker/docker/dockerversion.BuildTime=2024-03-15T16:28:09.000000000+00:00" -X "github.com/docker/docker/dockerversion.PlatformName=Docker Engine - Community" -X "github.com/docker/docker/dockerversion.ProductName=docker" -X "github.com/docker/docker/dockerversion.DefaultProductLicense="   ' -gcflags= github.com/docker/docker/cmd/dockerd
16:31:23 + rm -f /root/build-deb/engine/go.mod
16:31:23 Created binary: bundles/dynbinary-daemon/dockerd
16:31:23 Building dynamic bundles/dynbinary-daemon/docker-proxy (linux/arm/v6)...
16:31:23 + tee /root/build-deb/engine/go.mod
16:31:23 module github.com/docker/docker
16:31:23 
16:31:23 go 1.21
16:31:23 + trap 'rm -f "${ROOTDIR}/go.mod"' EXIT
16:31:23 + GO111MODULE=on
16:31:23 + GOTOOLCHAIN=local
16:31:23 + go build -mod=vendor -modfile=vendor.mod -o bundles/dynbinary-daemon/docker-proxy -tags ' journald' -buildmode=pie -ldflags '-w -X "github.com/docker/docker/dockerversion.Version=0.0.0-20240314122039-4e9abfe" -X "github.com/docker/docker/dockerversion.GitCommit=979f03f" -X "github.com/docker/docker/dockerversion.BuildTime=2024-03-15T16:28:09.000000000+00:00" -X "github.com/docker/docker/dockerversion.PlatformName=Docker Engine - Community" -X "github.com/docker/docker/dockerversion.ProductName=docker" -X "github.com/docker/docker/dockerversion.DefaultProductLicense="   ' -gcflags= github.com/docker/docker/cmd/docker-proxy
16:31:23 + rm -f /root/build-deb/engine/go.mod
16:31:23 Created binary: bundles/dynbinary-daemon/docker-proxy
16:31:23 
16:31:23 cd engine && TMP_GOPATH="/go" hack/dockerfile/install/install.sh tini
16:31:23 + RM_GOPATH=0
16:31:23 + TMP_GOPATH=/go
16:31:23 + : /usr/local/bin
16:31:23 + '[' -z /go ']'
16:31:23 + export GOPATH=/go
16:31:23 + GOPATH=/go
16:31:23 + case "$(go env GOARCH)" in
16:31:23 ++ go env GOARCH
16:31:23 + export GO_BUILDMODE=-buildmode=pie
16:31:23 + GO_BUILDMODE=-buildmode=pie
16:31:23 ++ dirname hack/dockerfile/install/install.sh
16:31:23 + dir=hack/dockerfile/install
16:31:23 + bin=tini
16:31:23 + shift
16:31:23 + '[' '!' -f hack/dockerfile/install/tini.installer ']'
16:31:23 + . hack/dockerfile/install/tini.installer
16:31:23 ++ : v0.19.0
16:31:23 + install_tini
16:31:23 + echo 'Install tini version v0.19.0'
16:31:23 + git clone https://github.com/krallin/tini.git /go/tini
16:31:23 Install tini version v0.19.0
16:31:23 Cloning into '/go/tini'...
16:31:23 + cd /go/tini
16:31:23 + git checkout -q v0.19.0
16:31:23 + cmake .
16:31:23 CMake Deprecation Warning at CMakeLists.txt:1 (cmake_minimum_required):
16:31:23   Compatibility with CMake < 2.8.12 will be removed from a future version of
16:31:23   CMake.
16:31:23 
16:31:23   Update the VERSION argument <min> value or use a ...<max> suffix to tell
16:31:23   CMake that the project does not need compatibility with older versions.
16:31:23 
16:31:23 
16:31:23 -- The C compiler identification is GNU 12.2.0
16:31:23 -- Detecting C compiler ABI info
16:31:23 -- Detecting C compiler ABI info - failed
16:31:23 -- Check for working C compiler: /usr/bin/cc
16:31:23 -- Check for working C compiler: /usr/bin/cc - broken
16:31:23 CMake Error at /usr/share/cmake-3.25/Modules/CMakeTestCCompiler.cmake:70 (message):
16:31:23   The C compiler
16:31:23 
16:31:23     "/usr/bin/cc"
16:31:23 
16:31:23   is not able to compile a simple test program.
16:31:23 
16:31:23   It fails with the following output:
16:31:23 
16:31:23     Change Dir: /go/tini/CMakeFiles/CMakeScratch/TryCompile-zZ67tE
16:31:23     
16:31:23     Run Build Command(s):/usr/bin/gmake -f Makefile cmTC_9aac7/fast && gmake[2]: Entering directory '/go/tini/CMakeFiles/CMakeScratch/TryCompile-zZ67tE'
16:31:23     /usr/bin/gmake  -f CMakeFiles/cmTC_9aac7.dir/build.make CMakeFiles/cmTC_9aac7.dir/build
16:31:23     gmake[3]: Entering directory '/go/tini/CMakeFiles/CMakeScratch/TryCompile-zZ67tE'
16:31:23     Building C object CMakeFiles/cmTC_9aac7.dir/testCCompiler.c.o
16:31:23     /usr/bin/cc   "-marm -march=armv6+fp"  -o CMakeFiles/cmTC_9aac7.dir/testCCompiler.c.o -c /go/tini/CMakeFiles/CMakeScratch/TryCompile-zZ67tE/testCCompiler.c
16:31:23     cc: error: unrecognized command-line option ‘-marm -march=armv6+fp’
16:31:23     gmake[3]: *** [CMakeFiles/cmTC_9aac7.dir/build.make:78: CMakeFiles/cmTC_9aac7.dir/testCCompiler.c.o] Error 1
16:31:23     gmake[3]: Leaving directory '/go/tini/CMakeFiles/CMakeScratch/TryCompile-zZ67tE'
16:31:23     gmake[2]: *** [Makefile:127: cmTC_9aac7/fast] Error 2
16:31:23     gmake[2]: Leaving directory '/go/tini/CMakeFiles/CMakeScratch/TryCompile-zZ67tE'
16:31:23     
16:31:23     
16:31:23 
16:31:23   
16:31:23 
16:31:23   CMake will not be able to correctly generate this project.
16:31:23 Call Stack (most recent call first):
16:31:23   CMakeLists.txt:2 (project)
16:31:23 
16:31:23 
16:31:23 -- Configuring incomplete, errors occurred!
16:31:23 See also "/go/tini/CMakeFiles/CMakeOutput.log".
16:31:23 See also "/go/tini/CMakeFiles/CMakeError.log".
16:31:23 make[1]: *** [debian/rules:26: override_dh_auto_build] Error 1
16:31:23 make[1]: Leaving directory '/root/build-deb'
16:31:23 make: *** [debian/rules:121: build] Error 2
16:31:23 dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2
16:31:23 make[1]: *** [Makefile:80: raspbian-bookworm] Error 2
16:31:23 make[1]: Leaving directory '/home/ubuntu/workspace/docker-ce-packaging_PR-1003/deb'
16:31:23 make: *** [Makefile:83: raspbian-bookworm] Error 2