Status
Console Output
Skipping 257 KB.. Full Log
pper-dev             libseccomp-dev/buster-backports             libsystemd-dev             libudev-dev
15:54:25 #15 sha256:3b061a68f0650cc52c1953f6e47dbc4ca5b8f00fcad9dccafe0ed0db54ef8981
15:54:25 #15 9.982 Reading package lists...
15:54:25 #15 12.33 Building dependency tree...
15:54:25 #15 12.81 Reading state information...
15:54:25 #15 13.09 The following additional packages will be installed:
15:54:25 #15 13.09   binutils-mingw-w64-i686 binutils-mingw-w64-x86-64 dmsetup gcc-mingw-w64-base
15:54:25 #15 13.09   gcc-mingw-w64-x86-64 libapparmor1 libbtrfs0 libdevmapper-event1.02.1
15:54:25 #15 13.09   libdevmapper1.02.1 libpcre16-3 libpcre3-dev libpcre32-3 libpcrecpp0v5
15:54:25 #15 13.09   libseccomp2 libselinux1-dev libsepol1-dev mingw-w64-common
15:54:25 #15 13.09   mingw-w64-x86-64-dev
15:54:25 #15 13.09 Suggested packages:
15:54:25 #15 13.09   gcc-8-locales seccomp wine64
15:54:25 #15 13.46 The following NEW packages will be installed:
15:54:25 #15 13.46   binutils-mingw-w64 binutils-mingw-w64-i686 binutils-mingw-w64-x86-64 dmsetup
15:54:25 #15 13.46   g++-mingw-w64-x86-64 gcc-mingw-w64-base gcc-mingw-w64-x86-64 libapparmor-dev
15:54:25 #15 13.46   libapparmor1 libbtrfs-dev libbtrfs0 libdevmapper-dev
15:54:25 #15 13.46   libdevmapper-event1.02.1 libdevmapper1.02.1 libpcre16-3 libpcre3-dev
15:54:25 #15 13.46   libpcre32-3 libpcrecpp0v5 libseccomp-dev libselinux1-dev libsepol1-dev
15:54:25 #15 13.47   libsystemd-dev libudev-dev mingw-w64-common mingw-w64-x86-64-dev
15:54:25 #15 13.47 The following packages will be upgraded:
15:54:25 #15 13.47   libseccomp2
15:54:25 #15 13.75 1 upgraded, 25 newly installed, 0 to remove and 1 not upgraded.
15:54:25 #15 13.75 Need to get 77.8 MB of archives.
15:54:25 #15 13.75 After this operation, 487 MB of additional disk space will be used.
15:54:25 #15 13.75 Get:1 http://deb.debian.org/debian buster-backports/main amd64 libseccomp2 amd64 2.5.1-1~bpo10+1 [47.7 kB]
15:54:25 #15 13.76 Get:2 http://deb.debian.org/debian buster/main amd64 binutils-mingw-w64-i686 amd64 2.31.1-11+8.3 [2310 kB]
15:54:25 #15 13.82 Get:3 http://deb.debian.org/debian buster/main amd64 binutils-mingw-w64-x86-64 amd64 2.31.1-11+8.3 [2642 kB]
15:54:25 #15 13.90 Get:4 http://deb.debian.org/debian buster/main amd64 binutils-mingw-w64 all 2.31.1-11+8.3 [138 kB]
15:54:25 #15 13.91 Get:5 http://deb.debian.org/debian buster/main amd64 libdevmapper1.02.1 amd64 2:1.02.155-3 [141 kB]
15:54:25 #15 13.91 Get:6 http://deb.debian.org/debian buster/main amd64 dmsetup amd64 2:1.02.155-3 [90.8 kB]
15:54:25 #15 13.92 Get:7 http://deb.debian.org/debian buster/main amd64 mingw-w64-common all 6.0.0-3 [4910 kB]
15:54:25 #15 14.09 Get:8 http://deb.debian.org/debian buster/main amd64 mingw-w64-x86-64-dev all 6.0.0-3 [3454 kB]
15:54:25 #15 14.20 Get:9 http://deb.debian.org/debian buster/main amd64 gcc-mingw-w64-base amd64 8.3.0-6+21.3~deb10u2 [175 kB]
15:54:25 #15 14.20 Get:10 http://deb.debian.org/debian buster/main amd64 gcc-mingw-w64-x86-64 amd64 8.3.0-6+21.3~deb10u2 [35.8 MB]
15:54:25 #15 15.24 Get:11 http://deb.debian.org/debian buster/main amd64 g++-mingw-w64-x86-64 amd64 8.3.0-6+21.3~deb10u2 [25.3 MB]
15:54:25 #15 16.08 Get:12 http://deb.debian.org/debian buster/main amd64 libapparmor1 amd64 2.13.2-10 [94.7 kB]
15:54:25 #15 16.08 Get:13 http://deb.debian.org/debian buster/main amd64 libapparmor-dev amd64 2.13.2-10 [136 kB]
15:54:25 #15 16.08 Get:14 http://deb.debian.org/debian buster/main amd64 libbtrfs0 amd64 4.20.1-2 [42.0 kB]
15:54:25 #15 16.08 Get:15 http://deb.debian.org/debian buster/main amd64 libbtrfs-dev amd64 4.20.1-2 [77.1 kB]
15:54:25 #15 16.09 Get:16 http://deb.debian.org/debian buster/main amd64 libdevmapper-event1.02.1 amd64 2:1.02.155-3 [22.6 kB]
15:54:25 #15 16.09 Get:17 http://deb.debian.org/debian buster/main amd64 libudev-dev amd64 241-7~deb10u8 [110 kB]
15:54:25 #15 16.09 Get:18 http://deb.debian.org/debian buster/main amd64 libsepol1-dev amd64 2.8-1 [338 kB]
15:54:25 #15 16.10 Get:19 http://deb.debian.org/debian buster/main amd64 libpcre16-3 amd64 2:8.39-12 [259 kB]
15:54:25 #15 16.11 Get:20 http://deb.debian.org/debian buster/main amd64 libpcre32-3 amd64 2:8.39-12 [250 kB]
15:54:25 #15 16.12 Get:21 http://deb.debian.org/debian buster/main amd64 libpcrecpp0v5 amd64 2:8.39-12 [152 kB]
15:54:25 #15 16.12 Get:22 http://deb.debian.org/debian buster/main amd64 libpcre3-dev amd64 2:8.39-12 [650 kB]
15:54:25 #15 16.13 Get:23 http://deb.debian.org/debian buster/main amd64 libselinux1-dev amd64 2.8-1+b1 [169 kB]
15:54:25 #15 16.14 Get:24 http://deb.debian.org/debian buster/main amd64 libdevmapper-dev amd64 2:1.02.155-3 [51.4 kB]
15:54:25 #15 16.14 Get:25 http://deb.debian.org/debian buster-backports/main amd64 libseccomp-dev amd64 2.5.1-1~bpo10+1 [90.3 kB]
15:54:25 #15 16.15 Get:26 http://deb.debian.org/debian buster/main amd64 libsystemd-dev amd64 241-7~deb10u8 [322 kB]
15:54:25 #15 16.59 debconf: delaying package configuration, since apt-utils is not installed
15:54:25 #15 16.66 Fetched 77.8 MB in 3s (29.2 MB/s)
15:54:25 #15 16.71 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 15421 files and directories currently installed.)
15:54:25 #15 16.74 Preparing to unpack .../libseccomp2_2.5.1-1~bpo10+1_amd64.deb ...
15:54:25 #15 16.76 Unpacking libseccomp2:amd64 (2.5.1-1~bpo10+1) over (2.3.3-4) ...
15:54:25 #15 16.85 Setting up libseccomp2:amd64 (2.5.1-1~bpo10+1) ...
15:54:25 #15 16.92 Selecting previously unselected package binutils-mingw-w64-i686.
15:54:25 #15 16.92 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 15421 files and directories currently installed.)
15:54:25 #15 16.95 Preparing to unpack .../00-binutils-mingw-w64-i686_2.31.1-11+8.3_amd64.deb ...
15:54:25 #15 16.95 Unpacking binutils-mingw-w64-i686 (2.31.1-11+8.3) ...
15:54:25 #15 17.75 Selecting previously unselected package binutils-mingw-w64-x86-64.
15:54:25 #15 17.75 Preparing to unpack .../01-binutils-mingw-w64-x86-64_2.31.1-11+8.3_amd64.deb ...
15:54:25 #15 17.76 Unpacking binutils-mingw-w64-x86-64 (2.31.1-11+8.3) ...
15:54:25 #15 18.96 Selecting previously unselected package binutils-mingw-w64.
15:54:25 #15 18.96 Preparing to unpack .../02-binutils-mingw-w64_2.31.1-11+8.3_all.deb ...
15:54:25 #15 18.97 Unpacking binutils-mingw-w64 (2.31.1-11+8.3) ...
15:54:25 #15 19.03 Selecting previously unselected package libdevmapper1.02.1:amd64.
15:54:25 #15 19.05 Preparing to unpack .../03-libdevmapper1.02.1_2%3a1.02.155-3_amd64.deb ...
15:54:25 #15 19.07 Unpacking libdevmapper1.02.1:amd64 (2:1.02.155-3) ...
15:54:25 #15 19.17 Selecting previously unselected package dmsetup.
15:54:25 #15 19.17 Preparing to unpack .../04-dmsetup_2%3a1.02.155-3_amd64.deb ...
15:54:25 #15 19.18 Unpacking dmsetup (2:1.02.155-3) ...
15:54:25 #15 19.29 Selecting previously unselected package mingw-w64-common.
15:54:25 #15 19.30 Preparing to unpack .../05-mingw-w64-common_6.0.0-3_all.deb ...
15:54:25 #15 19.30 Unpacking mingw-w64-common (6.0.0-3) ...
15:54:25 #15 21.50 Selecting previously unselected package mingw-w64-x86-64-dev.
15:54:25 #15 21.50 Preparing to unpack .../06-mingw-w64-x86-64-dev_6.0.0-3_all.deb ...
15:54:25 #15 21.51 Unpacking mingw-w64-x86-64-dev (6.0.0-3) ...
15:54:25 #15 ...
15:54:25 
15:54:25 #23 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh containerd
15:54:25 #23 sha256:8fd58787f6943aad75bf5bac7c901be8fc8ccecb73b950f17ecbcb10a6eb83e6
15:54:25 #23 1.144 + RM_GOPATH=0
15:54:25 #23 1.144 + TMP_GOPATH=
15:54:25 #23 1.144 + : /build
15:54:25 #23 1.145 + '[' -z '' ']'
15:54:25 #23 1.146 ++ mktemp -d
15:54:25 #23 1.148 + export GOPATH=/tmp/tmp.7K3yd9f3mu
15:54:25 #23 1.149 + GOPATH=/tmp/tmp.7K3yd9f3mu
15:54:25 #23 1.149 + RM_GOPATH=1
15:54:25 #23 1.149 + case "$(go env GOARCH)" in
15:54:25 #23 1.150 ++ go env GOARCH
15:54:25 #23 1.159 + export GO_BUILDMODE=-buildmode=pie
15:54:25 #23 1.160 + GO_BUILDMODE=-buildmode=pie
15:54:25 #23 1.160 ++ dirname /tmp/install/install.sh
15:54:25 #23 1.161 + dir=/tmp/install
15:54:25 #23 1.164 + bin=containerd
15:54:25 #23 1.164 + shift
15:54:25 #23 1.164 + '[' '!' -f /tmp/install/containerd.installer ']'
15:54:25 #23 1.165 + . /tmp/install/containerd.installer
15:54:25 #23 1.165 ++ set -e
15:54:25 #23 1.165 ++ : v1.5.9
15:54:25 #23 1.165 + install_containerd
15:54:25 #23 1.166 + echo 'Install containerd version v1.5.9'
15:54:25 #23 1.166 Install containerd version v1.5.9
15:54:25 #23 1.166 + git clone https://github.com/containerd/containerd.git /tmp/tmp.7K3yd9f3mu/src/github.com/containerd/containerd
15:54:25 #23 1.172 Cloning into '/tmp/tmp.7K3yd9f3mu/src/github.com/containerd/containerd'...
15:54:26 #23 ...
15:54:26 
15:54:26 #18 [tini 2/2] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh tini
15:54:26 #18 sha256:81b16af79494f45a3b752aa3c514e0a46531b9c4326aa0633f5c3302dadcd67c
15:54:26 #18 3.276 -- Performing Test HAS_BUILTIN_FORTIFY - Failed
15:54:26 #18 3.320 -- Configuring done
15:54:26 #18 3.335 -- Generating done
15:54:26 #18 3.336 -- Build files have been written to: /tmp/tmp.UzVtl7ZIIz/tini
15:54:26 #18 3.338 + make tini-static
15:54:26 #18 3.524 Scanning dependencies of target tini-static
15:54:26 #18 3.599 [ 50%] Building C object CMakeFiles/tini-static.dir/src/tini.c.o
15:54:26 #18 4.062 [100%] Linking C executable tini-static
15:54:26 #18 4.223 [100%] Built target tini-static
15:54:26 #18 4.276 + mkdir -p /build
15:54:26 #18 4.278 + cp tini-static /build/docker-init
15:54:26 #18 DONE 4.4s
15:54:26 
15:54:26 #23 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh containerd
15:54:26 #23 sha256:8fd58787f6943aad75bf5bac7c901be8fc8ccecb73b950f17ecbcb10a6eb83e6
15:54:27 #23 ...
15:54:27 
15:54:27 #25 [rootlesskit 1/3] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh rootlesskit
15:54:27 #25 sha256:822de28148fa445fc1c6e7a480e3e375c124457a5775a7bac44bd8fe2b93f12c
15:54:27 #25 25.32 + for f in rootlesskit rootlesskit-docker-proxy
15:54:27 #25 25.32 + GOBIN=/build
15:54:27 #25 25.32 + GO111MODULE=on
15:54:27 #25 25.32 + go install -ldflags= github.com/rootless-containers/rootlesskit/cmd/rootlesskit-docker-proxy@v0.14.4
15:54:30 #25 DONE 28.3s
15:54:30 
15:54:30 #15 [runtime-dev-cross-false 2/2] RUN --mount=type=cache,sharing=locked,id=moby-cross-false-aptlib,target=/var/lib/apt     --mount=type=cache,sharing=locked,id=moby-cross-false-aptcache,target=/var/cache/apt         apt-get update && apt-get install -y --no-install-recommends             binutils-mingw-w64             g++-mingw-w64-x86-64             libapparmor-dev             libbtrfs-dev             libdevmapper-dev             libseccomp-dev/buster-backports             libsystemd-dev             libudev-dev
15:54:30 #15 sha256:3b061a68f0650cc52c1953f6e47dbc4ca5b8f00fcad9dccafe0ed0db54ef8981
15:54:30 #15 24.01 Selecting previously unselected package gcc-mingw-w64-base.
15:54:30 #15 24.01 Preparing to unpack .../07-gcc-mingw-w64-base_8.3.0-6+21.3~deb10u2_amd64.deb ...
15:54:30 #15 24.01 Unpacking gcc-mingw-w64-base (8.3.0-6+21.3~deb10u2) ...
15:54:30 #15 24.06 Selecting previously unselected package gcc-mingw-w64-x86-64.
15:54:30 #15 24.06 Preparing to unpack .../08-gcc-mingw-w64-x86-64_8.3.0-6+21.3~deb10u2_amd64.deb ...
15:54:30 #15 24.08 Unpacking gcc-mingw-w64-x86-64 (8.3.0-6+21.3~deb10u2) ...
15:54:30 #15 ...
15:54:30 
15:54:30 #26 [rootlesskit 2/3] COPY ./contrib/dockerd-rootless.sh /build
15:54:30 #26 sha256:49408dd7ec4b6b9e7638400a73af21326c1107a74cadd79f10746c0e71620c6d
15:54:30 #26 DONE 0.1s
15:54:30 
15:54:30 #27 [rootlesskit 3/3] COPY ./contrib/dockerd-rootless-setuptool.sh /build
15:54:30 #27 sha256:21846f9556bfa1313b67504b4e9793480af11bf4ea0a48b832f641b1767b3a18
15:54:30 #27 DONE 0.1s
15:54:30 
15:54:30 #23 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh containerd
15:54:30 #23 sha256:8fd58787f6943aad75bf5bac7c901be8fc8ccecb73b950f17ecbcb10a6eb83e6
15:54:34 #23 18.16 + cd /tmp/tmp.7K3yd9f3mu/src/github.com/containerd/containerd
15:54:34 #23 18.16 + git checkout -q v1.5.9
15:54:34 #23 19.05 + export 'BUILDTAGS=netgo osusergo static_build'
15:54:34 #23 19.05 + BUILDTAGS='netgo osusergo static_build'
15:54:34 #23 19.05 + export EXTRA_FLAGS=-buildmode=pie
15:54:34 #23 19.05 + EXTRA_FLAGS=-buildmode=pie
15:54:34 #23 19.05 + export 'EXTRA_LDFLAGS=-extldflags "-fno-PIC -static"'
15:54:34 #23 19.05 + EXTRA_LDFLAGS='-extldflags "-fno-PIC -static"'
15:54:34 #23 19.05 + '[' '' = dynamic ']'
15:54:34 #23 19.05 + make
15:54:35 #23 19.77 + bin/ctr
15:54:39 #23 ...
15:54:39 
15:54:39 #15 [runtime-dev-cross-false 2/2] RUN --mount=type=cache,sharing=locked,id=moby-cross-false-aptlib,target=/var/lib/apt     --mount=type=cache,sharing=locked,id=moby-cross-false-aptcache,target=/var/cache/apt         apt-get update && apt-get install -y --no-install-recommends             binutils-mingw-w64             g++-mingw-w64-x86-64             libapparmor-dev             libbtrfs-dev             libdevmapper-dev             libseccomp-dev/buster-backports             libsystemd-dev             libudev-dev
15:54:39 #15 sha256:3b061a68f0650cc52c1953f6e47dbc4ca5b8f00fcad9dccafe0ed0db54ef8981
15:54:39 #15 30.87 Selecting previously unselected package g++-mingw-w64-x86-64.
15:54:39 #15 30.87 Preparing to unpack .../09-g++-mingw-w64-x86-64_8.3.0-6+21.3~deb10u2_amd64.deb ...
15:54:39 #15 30.88 Unpacking g++-mingw-w64-x86-64 (8.3.0-6+21.3~deb10u2) ...
15:54:39 #15 34.76 Selecting previously unselected package libapparmor1:amd64.
15:54:39 #15 34.76 Preparing to unpack .../10-libapparmor1_2.13.2-10_amd64.deb ...
15:54:39 #15 34.76 Unpacking libapparmor1:amd64 (2.13.2-10) ...
15:54:39 #15 34.82 Selecting previously unselected package libapparmor-dev:amd64.
15:54:39 #15 34.82 Preparing to unpack .../11-libapparmor-dev_2.13.2-10_amd64.deb ...
15:54:39 #15 34.83 Unpacking libapparmor-dev:amd64 (2.13.2-10) ...
15:54:39 #15 34.89 Selecting previously unselected package libbtrfs0.
15:54:39 #15 34.89 Preparing to unpack .../12-libbtrfs0_4.20.1-2_amd64.deb ...
15:54:39 #15 34.89 Unpacking libbtrfs0 (4.20.1-2) ...
15:54:39 #15 34.93 Selecting previously unselected package libbtrfs-dev.
15:54:39 #15 34.93 Preparing to unpack .../13-libbtrfs-dev_4.20.1-2_amd64.deb ...
15:54:39 #15 34.93 Unpacking libbtrfs-dev (4.20.1-2) ...
15:54:39 #15 35.00 Selecting previously unselected package libdevmapper-event1.02.1:amd64.
15:54:39 #15 35.00 Preparing to unpack .../14-libdevmapper-event1.02.1_2%3a1.02.155-3_amd64.deb ...
15:54:39 #15 35.01 Unpacking libdevmapper-event1.02.1:amd64 (2:1.02.155-3) ...
15:54:39 #15 35.05 Selecting previously unselected package libudev-dev:amd64.
15:54:39 #15 35.06 Preparing to unpack .../15-libudev-dev_241-7~deb10u8_amd64.deb ...
15:54:39 #15 35.07 Unpacking libudev-dev:amd64 (241-7~deb10u8) ...
15:54:39 #15 35.15 Selecting previously unselected package libsepol1-dev:amd64.
15:54:39 #15 35.15 Preparing to unpack .../16-libsepol1-dev_2.8-1_amd64.deb ...
15:54:39 #15 35.15 Unpacking libsepol1-dev:amd64 (2.8-1) ...
15:54:39 #15 35.27 Selecting previously unselected package libpcre16-3:amd64.
15:54:39 #15 35.28 Preparing to unpack .../17-libpcre16-3_2%3a8.39-12_amd64.deb ...
15:54:39 #15 35.29 Unpacking libpcre16-3:amd64 (2:8.39-12) ...
15:54:39 #15 35.37 Selecting previously unselected package libpcre32-3:amd64.
15:54:39 #15 35.37 Preparing to unpack .../18-libpcre32-3_2%3a8.39-12_amd64.deb ...
15:54:39 #15 35.38 Unpacking libpcre32-3:amd64 (2:8.39-12) ...
15:54:39 #15 35.44 Selecting previously unselected package libpcrecpp0v5:amd64.
15:54:39 #15 35.45 Preparing to unpack .../19-libpcrecpp0v5_2%3a8.39-12_amd64.deb ...
15:54:39 #15 35.45 Unpacking libpcrecpp0v5:amd64 (2:8.39-12) ...
15:54:39 #15 35.50 Selecting previously unselected package libpcre3-dev:amd64.
15:54:39 #15 35.51 Preparing to unpack .../20-libpcre3-dev_2%3a8.39-12_amd64.deb ...
15:54:39 #15 35.51 Unpacking libpcre3-dev:amd64 (2:8.39-12) ...
15:54:39 #15 35.68 Selecting previously unselected package libselinux1-dev:amd64.
15:54:39 #15 35.69 Preparing to unpack .../21-libselinux1-dev_2.8-1+b1_amd64.deb ...
15:54:39 #15 35.69 Unpacking libselinux1-dev:amd64 (2.8-1+b1) ...
15:54:39 #15 35.79 Selecting previously unselected package libdevmapper-dev:amd64.
15:54:39 #15 35.79 Preparing to unpack .../22-libdevmapper-dev_2%3a1.02.155-3_amd64.deb ...
15:54:39 #15 35.79 Unpacking libdevmapper-dev:amd64 (2:1.02.155-3) ...
15:54:39 #15 35.85 Selecting previously unselected package libseccomp-dev:amd64.
15:54:39 #15 35.85 Preparing to unpack .../23-libseccomp-dev_2.5.1-1~bpo10+1_amd64.deb ...
15:54:39 #15 35.86 Unpacking libseccomp-dev:amd64 (2.5.1-1~bpo10+1) ...
15:54:39 #15 35.93 Selecting previously unselected package libsystemd-dev:amd64.
15:54:39 #15 35.94 Preparing to unpack .../24-libsystemd-dev_241-7~deb10u8_amd64.deb ...
15:54:39 #15 35.95 Unpacking libsystemd-dev:amd64 (241-7~deb10u8) ...
15:54:39 #15 36.14 Setting up libpcrecpp0v5:amd64 (2:8.39-12) ...
15:54:39 #15 36.15 Setting up libseccomp-dev:amd64 (2.5.1-1~bpo10+1) ...
15:54:39 #15 36.17 Setting up libapparmor1:amd64 (2.13.2-10) ...
15:54:39 #15 36.18 Setting up binutils-mingw-w64-x86-64 (2.31.1-11+8.3) ...
15:54:39 #15 36.19 Setting up libpcre16-3:amd64 (2:8.39-12) ...
15:54:39 #15 36.20 Setting up libsepol1-dev:amd64 (2.8-1) ...
15:54:39 #15 36.21 Setting up gcc-mingw-w64-base (8.3.0-6+21.3~deb10u2) ...
15:54:39 #15 36.22 Setting up libbtrfs0 (4.20.1-2) ...
15:54:39 #15 36.23 Setting up libpcre32-3:amd64 (2:8.39-12) ...
15:54:39 #15 36.24 Setting up libudev-dev:amd64 (241-7~deb10u8) ...
15:54:39 #15 36.27 Setting up binutils-mingw-w64-i686 (2.31.1-11+8.3) ...
15:54:39 #15 36.28 Setting up libbtrfs-dev (4.20.1-2) ...
15:54:39 #15 36.29 Setting up libapparmor-dev:amd64 (2.13.2-10) ...
15:54:39 #15 36.30 Setting up mingw-w64-common (6.0.0-3) ...
15:54:39 #15 36.31 Setting up libsystemd-dev:amd64 (241-7~deb10u8) ...
15:54:39 #15 36.33 Setting up mingw-w64-x86-64-dev (6.0.0-3) ...
15:54:39 #15 36.34 Setting up libpcre3-dev:amd64 (2:8.39-12) ...
15:54:39 #15 36.35 Setting up gcc-mingw-w64-x86-64 (8.3.0-6+21.3~deb10u2) ...
15:54:39 #15 36.36 update-alternatives: using /usr/bin/x86_64-w64-mingw32-gcc-posix to provide /usr/bin/x86_64-w64-mingw32-gcc (x86_64-w64-mingw32-gcc) in auto mode
15:54:39 #15 36.36 update-alternatives: using /usr/bin/x86_64-w64-mingw32-gcc-win32 to provide /usr/bin/x86_64-w64-mingw32-gcc (x86_64-w64-mingw32-gcc) in auto mode
15:54:39 #15 36.37 Setting up g++-mingw-w64-x86-64 (8.3.0-6+21.3~deb10u2) ...
15:54:39 #15 36.38 update-alternatives: using /usr/bin/x86_64-w64-mingw32-g++-posix to provide /usr/bin/x86_64-w64-mingw32-g++ (x86_64-w64-mingw32-g++) in auto mode
15:54:39 #15 36.38 update-alternatives: using /usr/bin/x86_64-w64-mingw32-g++-win32 to provide /usr/bin/x86_64-w64-mingw32-g++ (x86_64-w64-mingw32-g++) in auto mode
15:54:39 #15 36.39 Setting up binutils-mingw-w64 (2.31.1-11+8.3) ...
15:54:40 #15 36.40 Setting up libselinux1-dev:amd64 (2.8-1+b1) ...
15:54:40 #15 36.42 Setting up libdevmapper1.02.1:amd64 (2:1.02.155-3) ...
15:54:40 #15 36.43 Setting up dmsetup (2:1.02.155-3) ...
15:54:40 #15 36.44 Setting up libdevmapper-event1.02.1:amd64 (2:1.02.155-3) ...
15:54:40 #15 36.45 Setting up libdevmapper-dev:amd64 (2:1.02.155-3) ...
15:54:40 #15 36.46 Processing triggers for libc-bin (2.28-10) ...
15:54:41 #15 DONE 37.4s
15:54:41 
15:54:41 #19 [binary-base 1/7] COPY --from=tini        /build/ /usr/local/bin/
15:54:41 #19 sha256:d6803d6c4494c519b842530412f9a9d59776986248d9af828993ddd2d3becdc2
15:54:41 #19 DONE 0.2s
15:54:41 
15:54:41 #20 [runc 1/1] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh runc
15:54:41 #20 sha256:4ac10d41e5b914626e8e9ca0eb0e9b0d5836926b99002044553416d9dfc46a21
15:54:41 #20 0.709 + RM_GOPATH=0
15:54:41 #20 0.709 + TMP_GOPATH=
15:54:41 #20 0.709 + : /build
15:54:41 #20 0.709 + '[' -z '' ']'
15:54:41 #20 0.709 ++ mktemp -d
15:54:41 #20 0.710 + export GOPATH=/tmp/tmp.2RdA39ryXC
15:54:41 #20 0.710 + GOPATH=/tmp/tmp.2RdA39ryXC
15:54:41 #20 0.710 + RM_GOPATH=1
15:54:41 #20 0.710 + case "$(go env GOARCH)" in
15:54:41 #20 0.711 ++ go env GOARCH
15:54:41 #20 0.719 + export GO_BUILDMODE=-buildmode=pie
15:54:41 #20 0.719 + GO_BUILDMODE=-buildmode=pie
15:54:41 #20 0.719 ++ dirname /tmp/install/install.sh
15:54:41 #20 0.720 + dir=/tmp/install
15:54:41 #20 0.720 + bin=runc
15:54:41 #20 0.720 + shift
15:54:41 #20 0.720 + '[' '!' -f /tmp/install/runc.installer ']'
15:54:41 #20 0.720 + . /tmp/install/runc.installer
15:54:41 #20 0.720 ++ set -e
15:54:41 #20 0.720 ++ : v1.0.3
15:54:41 #20 0.720 + install_runc
15:54:41 #20 0.720 + RUNC_BUILDTAGS=seccomp
15:54:41 #20 0.720 + echo 'Install runc version v1.0.3 (build tags: seccomp)'
15:54:41 #20 0.720 + git clone https://github.com/opencontainers/runc.git /tmp/tmp.2RdA39ryXC/src/github.com/opencontainers/runc
15:54:41 #20 0.720 Install runc version v1.0.3 (build tags: seccomp)
15:54:41 #20 0.722 Cloning into '/tmp/tmp.2RdA39ryXC/src/github.com/opencontainers/runc'...
15:54:45 #20 4.746 + cd /tmp/tmp.2RdA39ryXC/src/github.com/opencontainers/runc
15:54:45 #20 4.746 + git checkout -q v1.0.3
15:54:46 #20 4.973 + '[' -z '' ']'
15:54:46 #20 4.974 + target=static
15:54:46 #20 4.974 + make BUILDTAGS=seccomp static
15:54:46 #20 5.267 CGO_ENABLED=1 go build -trimpath   -tags "seccomp netgo osusergo" -ldflags "-extldflags -static -X main.gitCommit=v1.0.3-0-gf46b6ba2 -X main.version=1.0.3 " -o runc .
15:55:12 #20 29.94 CGO_ENABLED=1 go build -trimpath   -tags "seccomp netgo osusergo" -ldflags "-extldflags -static -X main.gitCommit=v1.0.3-0-gf46b6ba2 -X main.version=1.0.3 " -o contrib/cmd/recvtty/recvtty ./contrib/cmd/recvtty
15:55:12 #20 30.73 + mkdir -p /build
15:55:12 #20 30.73 + cp runc /build/runc
15:55:12 #20 DONE 31.1s
15:55:12 
15:55:12 #23 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh containerd
15:55:12 #23 sha256:8fd58787f6943aad75bf5bac7c901be8fc8ccecb73b950f17ecbcb10a6eb83e6
15:55:13 #23 ...
15:55:13 
15:55:13 #21 [binary-base 2/7] COPY --from=runc        /build/ /usr/local/bin/
15:55:13 #21 sha256:e9845f711baf2c3cdf33128260d49541ed04d8e585f81270943886263ffe060f
15:55:13 #21 DONE 0.1s
15:55:13 
15:55:13 #23 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh containerd
15:55:13 #23 sha256:8fd58787f6943aad75bf5bac7c901be8fc8ccecb73b950f17ecbcb10a6eb83e6
15:55:17 #23 61.22 + bin/containerd
15:55:49 #23 90.06 # github.com/containerd/containerd/cmd/containerd
15:55:49 #23 90.06 /usr/bin/ld: /tmp/go-link-998923578/000019.o: in function `New':
15:55:49 #23 90.06 /tmp/tmp.7K3yd9f3mu/src/github.com/containerd/containerd/vendor/github.com/miekg/pkcs11/pkcs11.go:75: warning: Using 'dlopen' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
15:55:49 #23 90.13 + bin/containerd-stress
15:55:49 #23 91.18 + bin/containerd-shim
15:55:53 #23 97.93 + bin/containerd-shim-runc-v1
15:55:58 #23 103.0 + bin/containerd-shim-runc-v2
15:55:59 #23 103.5 + binaries
15:55:59 #23 103.5 + install -D bin/containerd /build/containerd
15:55:59 #23 103.6 + install -D bin/containerd-shim /build/containerd-shim
15:55:59 #23 103.6 + install -D bin/containerd-shim-runc-v2 /build/containerd-shim-runc-v2
15:55:59 #23 103.6 + install -D bin/ctr /build/ctr
15:55:59 #23 DONE 104.0s
15:56:00 
15:56:00 #24 [binary-base 3/7] COPY --from=containerd  /build/ /usr/local/bin/
15:56:00 #24 sha256:ff6f866e299bc623875e090af935e92179bd14d16b3ea318cc31610d1372e022
15:56:00 #24 DONE 0.2s
15:56:00 
15:56:00 #28 [binary-base 4/7] COPY --from=rootlesskit /build/ /usr/local/bin/
15:56:00 #28 sha256:0dc2819a543c741f9815c7e20314bd3c3e0e316747dd3abfcb1930ec9fa1b573
15:56:00 #28 DONE 0.1s
15:56:00 
15:56:00 #30 [binary-base 5/7] COPY --from=proxy       /build/ /usr/local/bin/
15:56:00 #30 sha256:957799129a4241fcba5a8100ea999144c016edc14df12df70074ad3fa564f532
15:56:00 #30 DONE 0.1s
15:56:00 
15:56:00 #35 [binary-base 6/7] COPY --from=vpnkit      /build/ /usr/local/bin/
15:56:00 #35 sha256:661359f694997d13919dde6c12dd38450dd8b20c3ee31b2226c4bd1d7b6cc071
15:56:01 #35 DONE 0.4s
15:56:01 
15:56:01 #36 [binary-base 7/7] WORKDIR /go/src/github.com/docker/docker
15:56:01 #36 sha256:a42e90611d67011d377656ca0d09bc595ac1e3eefb721460f2ffa86e303ac792
15:56:01 #36 DONE 0.0s
15:56:01 
15:56:01 #37 [build-binary 1/1] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=bind,target=/go/src/github.com/docker/docker         hack/make.sh binary
15:56:01 #37 sha256:04606b2c57d1e2c061066cabab8c51aee56d7db92036e0765600a3ac1155c05d
15:56:01 #37 0.332 
15:56:01 #37 0.393 Removing /build/bundles/
15:56:01 #37 0.394 
15:56:01 #37 0.399 ---> Making bundle: binary (in /build/bundles/binary)
15:56:01 #37 0.426 Building: /build/bundles/binary-daemon/dockerd-0.0.0-20220214173007-96f2cf8
15:56:01 #37 0.426 GOOS="" GOARCH="" GOARM=""
15:57:09 #37 61.02 Created binary: /build/bundles/binary-daemon/dockerd-0.0.0-20220214173007-96f2cf8
15:57:09 #37 61.50 Copying nested executables into /build/bundles/binary-daemon
15:57:09 #37 62.69 
15:57:09 #37 DONE 62.9s
15:57:09 
15:57:09 #38 [binary 1/1] COPY --from=build-binary /build/bundles/ /
15:57:09 #38 sha256:8a6deff60c4d20ec4c7e98ac499642595a971c3f8fb2bbb33e46e720a8c0e5e8
15:57:09 #38 DONE 0.4s
15:57:09 
15:57:09 #39 exporting to client
15:57:09 #39 sha256:b60a1292d407630dbb741f28ab6ea4ce3cca872ac28eeee56f4e66a182eca4bc
15:57:09 #39 copying files 21.50MB 0.1s
15:57:09 #39 copying files 207.72MB 1.0s done
15:57:09 #39 DONE 1.0s
15:57:09 make[2]: Leaving directory '/home/ubuntu/workspace/docker-ce-packaging_PR-630/src/github.com/docker/docker'
15:57:09 mkdir -p build/linux/docker
15:57:09 cp /home/ubuntu/workspace/docker-ce-packaging_PR-630/src/github.com/docker/cli/build/docker build/linux/docker/
15:57:09 for f in dockerd containerd ctr containerd-shim containerd-shim-runc-v2 docker-init docker-proxy runc; do \
15:57:09 	cp -L /home/ubuntu/workspace/docker-ce-packaging_PR-630/src/github.com/docker/docker/bundles/binary-daemon/$f build/linux/docker/$f; \
15:57:09 done
15:57:09 tar -C build/linux -c -z -f build/linux/docker-0.0.0-20220214173007-96f2cf8.tgz docker
15:57:17 # extra binaries for running rootless
15:57:17 mkdir -p build/linux/docker-rootless-extras
15:57:17 for f in rootlesskit rootlesskit-docker-proxy dockerd-rootless.sh dockerd-rootless-setuptool.sh vpnkit; do \
15:57:17 	if [ -f /home/ubuntu/workspace/docker-ce-packaging_PR-630/src/github.com/docker/docker/bundles/binary-daemon/$f ]; then \
15:57:17 		cp -L /home/ubuntu/workspace/docker-ce-packaging_PR-630/src/github.com/docker/docker/bundles/binary-daemon/$f build/linux/docker-rootless-extras/$f; \
15:57:17 	fi \
15:57:17 done
15:57:17 tar -C build/linux -c -z -f build/linux/docker-rootless-extras-0.0.0-20220214173007-96f2cf8.tgz docker-rootless-extras
15:57:19 make[1]: Leaving directory '/home/ubuntu/workspace/docker-ce-packaging_PR-630/static'