Console Output

Skipping 510 KB.. Full Log

tScxILi1BRfsEwJg4BPVmJZon5OYl66vk9+Xrp1RRGDFNSy5Py84vycVD1nCI1qPENFAZCu+yd+VwzoPj6QKXogU/TApnQ/mXCmX/k+EwOjFwNrWWJOaSrQXAGEIr/S3KTUorY1U2W5pzzohpoGBBzsZQCO41Nu8gAAAA==#21 10.65   libgcc1:arm64 libgcc1:armel libgcc1:armhf libseccomp2:arm64
15:54:43 #21 10.65   libseccomp2:armel libseccomp2:armhf
15:54:43 #21 10.65 Suggested packages:
15:54:43 #21 10.65   glibc-doc:arm64 libc-l10n:arm64 locales:arm64 glibc-doc:armel
15:54:43 #21 10.65   libc-l10n:armel locales:armel glibc-doc:armhf libc-l10n:armhf locales:armhf
15:54:43 #21 10.65   seccomp:arm64 seccomp:armel seccomp:armhf
15:54:43 #21 10.65 Recommended packages:
15:54:43 #21 10.65   libidn2-0:arm64 libidn2-0:armel libidn2-0:armhf
15:54:43 #21 10.78 The following NEW packages will be installed:
15:54:44 #21 10.78   gcc-8-base:arm64 gcc-8-base:armel gcc-8-base:armhf libapparmor-dev:arm64
15:54:44 #21 10.78   libapparmor-dev:armel libapparmor-dev:armhf libapparmor1:arm64
15:54:44 #21 10.78   libapparmor1:armel libapparmor1:armhf libc6:arm64 libc6:armel libc6:armhf
15:54:44 #21 10.79   libgcc1:arm64 libgcc1:armel libgcc1:armhf libseccomp-dev:arm64
15:54:44 #21 10.79   libseccomp-dev:armel libseccomp-dev:armhf libseccomp2:arm64
15:54:44 #21 10.79   libseccomp2:armel libseccomp2:armhf
15:54:44 #21 11.09 0 upgraded, 21 newly installed, 0 to remove and 1 not upgraded.
15:54:44 #21 11.09 Need to get 9067 kB of archives.
15:54:44 #21 11.09 After this operation, 31.8 MB of additional disk space will be used.
15:54:44 #21 11.09 Get:1 http://deb.debian.org/debian buster/main arm64 gcc-8-base arm64 8.3.0-6 [191 kB]
15:54:44 #21 11.09 Get:2 http://deb.debian.org/debian buster/main armel gcc-8-base armel 8.3.0-6 [191 kB]
15:54:44 #21 11.10 Get:3 http://deb.debian.org/debian buster/main armhf gcc-8-base armhf 8.3.0-6 [191 kB]
15:54:44 #21 11.10 Get:4 http://deb.debian.org/debian buster/main armhf libgcc1 armhf 1:8.3.0-6 [37.2 kB]
15:54:44 #21 11.11 Get:5 http://deb.debian.org/debian buster/main armhf libc6 armhf 2.28-10 [2390 kB]
15:54:44 #21 11.15 Get:6 http://deb.debian.org/debian buster/main armhf libapparmor1 armhf 2.13.2-10 [89.6 kB]
15:54:44 #21 11.15 Get:7 http://deb.debian.org/debian buster/main armhf libapparmor-dev armhf 2.13.2-10 [132 kB]
15:54:44 #21 11.15 Get:8 http://deb.debian.org/debian buster/main armel libgcc1 armel 1:8.3.0-6 [38.4 kB]
15:54:44 #21 11.16 Get:9 http://deb.debian.org/debian buster/main armel libc6 armel 2.28-10 [2399 kB]
15:54:44 #21 11.21 Get:10 http://deb.debian.org/debian buster/main armel libapparmor1 armel 2.13.2-10 [90.3 kB]
15:54:44 #21 11.21 Get:11 http://deb.debian.org/debian buster/main armel libapparmor-dev armel 2.13.2-10 [133 kB]
15:54:44 #21 11.21 Get:12 http://deb.debian.org/debian buster/main arm64 libgcc1 arm64 1:8.3.0-6 [34.4 kB]
15:54:44 #21 11.21 Get:13 http://deb.debian.org/debian buster/main arm64 libc6 arm64 2.28-10 [2521 kB]
15:54:44 #21 11.26 Get:14 http://deb.debian.org/debian buster/main arm64 libapparmor1 arm64 2.13.2-10 [93.8 kB]
15:54:44 #21 11.26 Get:15 http://deb.debian.org/debian buster/main arm64 libapparmor-dev arm64 2.13.2-10 [137 kB]
15:54:44 #21 11.27 Get:16 http://deb.debian.org/debian buster-backports/main armhf libseccomp2 armhf 2.5.1-1~bpo10+1 [45.9 kB]
15:54:44 #21 11.27 Get:17 http://deb.debian.org/debian buster-backports/main armhf libseccomp-dev armhf 2.5.1-1~bpo10+1 [86.1 kB]
15:54:44 #21 11.27 Get:18 http://deb.debian.org/debian buster-backports/main armel libseccomp2 armel 2.5.1-1~bpo10+1 [46.8 kB]
15:54:44 #21 11.27 Get:19 http://deb.debian.org/debian buster-backports/main armel libseccomp-dev armel 2.5.1-1~bpo10+1 [87.2 kB]
15:54:44 #21 11.28 Get:20 http://deb.debian.org/debian buster-backports/main arm64 libseccomp2 arm64 2.5.1-1~bpo10+1 [46.8 kB]
15:54:44 #21 11.28 Get:21 http://deb.debian.org/debian buster-backports/main arm64 libseccomp-dev arm64 2.5.1-1~bpo10+1 [88.6 kB]
15:54:44 #21 11.59 debconf: delaying package configuration, since apt-utils is not installed
15:54:44 #21 11.68 Fetched 9067 kB in 0s (20.2 MB/s)
15:54:44 #21 11.71 Selecting previously unselected package gcc-8-base:armel.
15:54:44 #21 11.72 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 32159 files and directories currently installed.)
15:54:44 #21 11.76 Preparing to unpack .../00-gcc-8-base_8.3.0-6_armel.deb ...
15:54:44 #21 11.76 Unpacking gcc-8-base:armel (8.3.0-6) ...
15:54:44 #21 11.83 Selecting previously unselected package gcc-8-base:armhf.
15:54:44 #21 11.83 Preparing to unpack .../01-gcc-8-base_8.3.0-6_armhf.deb ...
15:54:44 #21 11.83 Unpacking gcc-8-base:armhf (8.3.0-6) ...
15:54:45 #21 11.89 Selecting previously unselected package gcc-8-base:arm64.
15:54:45 #21 11.90 Preparing to unpack .../02-gcc-8-base_8.3.0-6_arm64.deb ...
15:54:45 #21 11.90 Unpacking gcc-8-base:arm64 (8.3.0-6) ...
15:54:45 #21 11.97 Selecting previously unselected package libgcc1:armel.
15:54:45 #21 11.98 Preparing to unpack .../03-libgcc1_1%3a8.3.0-6_armel.deb ...
15:54:45 #21 11.98 Unpacking libgcc1:armel (1:8.3.0-6) ...
15:54:45 #21 12.06 Selecting previously unselected package libc6:armel.
15:54:45 #21 12.06 Preparing to unpack .../04-libc6_2.28-10_armel.deb ...
15:54:45 #21 12.23 Unpacking libc6:armel (2.28-10) ...
15:54:45 #21 12.62 Selecting previously unselected package libapparmor1:armel.
15:54:45 #21 12.62 Preparing to unpack .../05-libapparmor1_2.13.2-10_armel.deb ...
15:54:45 #21 12.63 Unpacking libapparmor1:armel (2.13.2-10) ...
15:54:45 #21 12.67 Selecting previously unselected package libapparmor-dev:armel.
15:54:45 #21 12.68 Preparing to unpack .../06-libapparmor-dev_2.13.2-10_armel.deb ...
15:54:45 #21 12.68 Unpacking libapparmor-dev:armel (2.13.2-10) ...
15:54:45 #21 12.75 Selecting previously unselected package libgcc1:arm64.
15:54:45 #21 12.75 Preparing to unpack .../07-libgcc1_1%3a8.3.0-6_arm64.deb ...
15:54:45 #21 12.76 Unpacking libgcc1:arm64 (1:8.3.0-6) ...
15:54:45 #21 12.83 Selecting previously unselected package libc6:arm64.
15:54:45 #21 12.83 Preparing to unpack .../08-libc6_2.28-10_arm64.deb ...
15:54:46 #21 13.00 Unpacking libc6:arm64 (2.28-10) ...
15:54:46 #21 13.43 Selecting previously unselected package libapparmor1:arm64.
15:54:46 #21 13.44 Preparing to unpack .../09-libapparmor1_2.13.2-10_arm64.deb ...
15:54:46 #21 13.44 Unpacking libapparmor1:arm64 (2.13.2-10) ...
15:54:46 #21 13.49 Selecting previously unselected package libapparmor-dev:arm64.
15:54:46 #21 13.50 Preparing to unpack .../10-libapparmor-dev_2.13.2-10_arm64.deb ...
15:54:46 #21 13.51 Unpacking libapparmor-dev:arm64 (2.13.2-10) ...
15:54:46 #21 13.58 Selecting previously unselected package libgcc1:armhf.
15:54:46 #21 13.58 Preparing to unpack .../11-libgcc1_1%3a8.3.0-6_armhf.deb ...
15:54:46 #21 13.58 Unpacking libgcc1:armhf (1:8.3.0-6) ...
15:54:46 #21 13.65 Selecting previously unselected package libc6:armhf.
15:54:46 #21 13.65 Preparing to unpack .../12-libc6_2.28-10_armhf.deb ...
15:54:46 #21 13.81 Unpacking libc6:armhf (2.28-10) ...
15:54:47 #21 14.22 Selecting previously unselected package libapparmor1:armhf.
15:54:47 #21 14.22 Preparing to unpack .../13-libapparmor1_2.13.2-10_armhf.deb ...
15:54:47 #21 14.23 Unpacking libapparmor1:armhf (2.13.2-10) ...
15:54:47 #21 14.29 Selecting previously unselected package libapparmor-dev:armhf.
15:54:47 #21 14.29 Preparing to unpack .../14-libapparmor-dev_2.13.2-10_armhf.deb ...
15:54:47 #21 14.30 Unpacking libapparmor-dev:armhf (2.13.2-10) ...
15:54:47 #21 14.37 Selecting previously unselected package libseccomp2:armhf.
15:54:47 #21 14.38 Preparing to unpack .../15-libseccomp2_2.5.1-1~bpo10+1_armhf.deb ...
15:54:47 #21 14.39 Unpacking libseccomp2:armhf (2.5.1-1~bpo10+1) ...
15:54:47 #21 14.43 Selecting previously unselected package libseccomp-dev:armhf.
15:54:47 #21 14.44 Preparing to unpack .../16-libseccomp-dev_2.5.1-1~bpo10+1_armhf.deb ...
15:54:47 #21 14.44 Unpacking libseccomp-dev:armhf (2.5.1-1~bpo10+1) ...
15:54:47 #21 14.50 Selecting previously unselected package libseccomp2:armel.
15:54:47 #21 14.51 Preparing to unpack .../17-libseccomp2_2.5.1-1~bpo10+1_armel.deb ...
15:54:47 #21 14.51 Unpacking libseccomp2:armel (2.5.1-1~bpo10+1) ...
15:54:47 #21 14.56 Selecting previously unselected package libseccomp-dev:armel.
15:54:47 #21 14.56 Preparing to unpack .../18-libseccomp-dev_2.5.1-1~bpo10+1_armel.deb ...
15:54:47 #21 14.57 Unpacking libseccomp-dev:armel (2.5.1-1~bpo10+1) ...
15:54:47 #21 14.64 Selecting previously unselected package libseccomp2:arm64.
15:54:47 #21 14.64 Preparing to unpack .../19-libseccomp2_2.5.1-1~bpo10+1_arm64.deb ...
15:54:47 #21 14.64 Unpacking libseccomp2:arm64 (2.5.1-1~bpo10+1) ...
15:54:47 #21 14.68 Selecting previously unselected package libseccomp-dev:arm64.
15:54:47 #21 14.69 Preparing to unpack .../20-libseccomp-dev_2.5.1-1~bpo10+1_arm64.deb ...
15:54:47 #21 14.70 Unpacking libseccomp-dev:arm64 (2.5.1-1~bpo10+1) ...
15:54:47 #21 14.78 Setting up gcc-8-base:arm64 (8.3.0-6) ...
15:54:48 #21 14.79 Setting up gcc-8-base:armel (8.3.0-6) ...
15:54:48 #21 14.81 Setting up gcc-8-base:armhf (8.3.0-6) ...
15:54:48 #21 14.82 Setting up libc6:arm64 (2.28-10) ...
15:54:49 #21 16.06 Setting up libc6:armel (2.28-10) ...
15:54:50 #21 17.27 Setting up libc6:armhf (2.28-10) ...
15:54:51 #21 18.51 Setting up libapparmor1:arm64 (2.13.2-10) ...
15:54:51 #21 18.52 Setting up libapparmor1:armel (2.13.2-10) ...
15:54:51 #21 18.54 Setting up libapparmor1:armhf (2.13.2-10) ...
15:54:51 #21 18.55 Setting up libgcc1:arm64 (1:8.3.0-6) ...
15:54:51 #21 18.56 Setting up libgcc1:armel (1:8.3.0-6) ...
15:54:51 #21 18.58 Setting up libgcc1:armhf (1:8.3.0-6) ...
15:54:51 #21 18.59 Setting up libseccomp2:arm64 (2.5.1-1~bpo10+1) ...
15:54:51 #21 18.60 Setting up libseccomp2:armel (2.5.1-1~bpo10+1) ...
15:54:51 #21 18.62 Setting up libseccomp2:armhf (2.5.1-1~bpo10+1) ...
15:54:51 #21 18.63 Setting up libapparmor-dev:arm64 (2.13.2-10) ...
15:54:51 #21 18.65 Setting up libapparmor-dev:armel (2.13.2-10) ...
15:54:51 #21 18.66 Setting up libapparmor-dev:armhf (2.13.2-10) ...
15:54:51 #21 18.67 Setting up libseccomp-dev:arm64 (2.5.1-1~bpo10+1) ...
15:54:51 #21 18.68 Setting up libseccomp-dev:armel (2.5.1-1~bpo10+1) ...
15:54:51 #21 18.69 Setting up libseccomp-dev:armhf (2.5.1-1~bpo10+1) ...
15:54:51 #21 18.71 Processing triggers for libc-bin (2.28-10) ...
15:54:51 #21 DONE 18.9s
15:54:51 
15:54:51 #29 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh containerd
15:54:51 #29 sha256:a5743dc46f3a83111e4b8ca3d6f262de62d686991e5ab1df50d35907cdf45eca
15:54:52 #29 ...
15:54:52 
15:54:52 #26 [runc 1/1] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh runc
15:54:52 #26 sha256:22ed9961b02f754f96da842fd2e0fc37de935bf850309c411b855a32861d80bf
15:54:52 #26 ...
15:54:52 
15:54:52 #25 [binary-base 1/7] COPY --from=tini        /build/ /usr/local/bin/
15:54:52 #25 sha256:da4ef2c49004efa6f53d5b175c95f5c889f457d1b559d68f58767009cf78ff9e
15:54:52 #25 DONE 0.2s
15:54:52 
15:54:52 #26 [runc 1/1] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh runc
15:54:52 #26 sha256:22ed9961b02f754f96da842fd2e0fc37de935bf850309c411b855a32861d80bf
15:54:52 #26 0.733 + RM_GOPATH=0
15:54:52 #26 0.733 + TMP_GOPATH=
15:54:52 #26 0.733 + : /build
15:54:52 #26 0.733 + '[' -z '' ']'
15:54:52 #26 0.734 ++ mktemp -d
15:54:52 #26 0.735 + export GOPATH=/tmp/tmp.5bw2Sjx4qZ
15:54:52 #26 0.735 + GOPATH=/tmp/tmp.5bw2Sjx4qZ
15:54:52 #26 0.735 + RM_GOPATH=1
15:54:52 #26 0.735 + case "$(go env GOARCH)" in
15:54:52 #26 0.737 ++ go env GOARCH
15:54:52 #26 0.745 + export GO_BUILDMODE=-buildmode=pie
15:54:52 #26 0.745 + GO_BUILDMODE=-buildmode=pie
15:54:52 #26 0.746 ++ dirname /tmp/install/install.sh
15:54:52 #26 0.746 + dir=/tmp/install
15:54:52 #26 0.746 + bin=runc
15:54:52 #26 0.746 + shift
15:54:52 #26 0.746 + '[' '!' -f /tmp/install/runc.installer ']'
15:54:52 #26 0.746 + . /tmp/install/runc.installer
15:54:52 #26 0.746 ++ set -e
15:54:52 #26 0.746 ++ : v1.0.3
15:54:52 #26 0.746 + install_runc
15:54:52 #26 0.746 + RUNC_BUILDTAGS=seccomp
15:54:52 #26 0.747 + echo 'Install runc version v1.0.3 (build tags: seccomp)'
15:54:52 #26 0.747 + git clone https://github.com/opencontainers/runc.git /tmp/tmp.5bw2Sjx4qZ/src/github.com/opencontainers/runc
15:54:52 #26 0.747 Install runc version v1.0.3 (build tags: seccomp)
15:54:52 #26 0.748 Cloning into '/tmp/tmp.5bw2Sjx4qZ/src/github.com/opencontainers/runc'...
15:54:56 #26 3.743 + cd /tmp/tmp.5bw2Sjx4qZ/src/github.com/opencontainers/runc
15:54:56 #26 3.743 + git checkout -q v1.0.3
15:54:56 #26 3.955 + '[' -z '' ']'
15:54:56 #26 3.955 + target=static
15:54:56 #26 3.955 + make BUILDTAGS=seccomp static
15:54:56 #26 4.194 CGO_ENABLED=1 go build -trimpath   -tags "seccomp netgo osusergo" -ldflags "-extldflags -static -X main.gitCommit=v1.0.3-0-gf46b6ba2 -X main.version=1.0.3 " -o runc .
15:55:42 #26 ...
15:55:42 
15:55:42 #29 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh containerd
15:55:42 #29 sha256:a5743dc46f3a83111e4b8ca3d6f262de62d686991e5ab1df50d35907cdf45eca
15:55:42 #29 93.63 + bin/containerd
15:55:49 #29 ...
15:55:49 
15:55:49 #26 [runc 1/1] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh runc
15:55:49 #26 sha256:22ed9961b02f754f96da842fd2e0fc37de935bf850309c411b855a32861d80bf
15:55:49 #26 57.26 CGO_ENABLED=1 go build -trimpath   -tags "seccomp netgo osusergo" -ldflags "-extldflags -static -X main.gitCommit=v1.0.3-0-gf46b6ba2 -X main.version=1.0.3 " -o contrib/cmd/recvtty/recvtty ./contrib/cmd/recvtty
15:55:49 #26 58.10 + mkdir -p /build
15:55:49 #26 58.10 + cp runc /build/runc
15:55:50 #26 DONE 58.6s
15:55:50 
15:55:50 #29 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh containerd
15:55:50 #29 sha256:a5743dc46f3a83111e4b8ca3d6f262de62d686991e5ab1df50d35907cdf45eca
15:55:52 #29 ...
15:55:52 
15:55:52 #27 [binary-base 2/7] COPY --from=runc        /build/ /usr/local/bin/
15:55:52 #27 sha256:f019365a40d67fea4a113843a63e4c84ea33bfcf0da1794beebabc1c0b26c3cb
15:55:52 #27 DONE 0.1s
15:55:52 
15:55:52 #29 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh containerd
15:55:52 #29 sha256:a5743dc46f3a83111e4b8ca3d6f262de62d686991e5ab1df50d35907cdf45eca
15:56:18 #29 133.0 # github.com/containerd/containerd/cmd/containerd
15:56:18 #29 133.0 /usr/bin/ld: /tmp/go-link-045391896/000019.o: in function `New':
15:56:18 #29 133.0 /tmp/tmp.4cUkNVd3iG/src/github.com/containerd/containerd/vendor/github.com/miekg/pkcs11/pkcs11.go:75: warning: Using 'dlopen' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
15:56:18 #29 133.1 + bin/containerd-stress
15:56:18 #29 134.2 + bin/containerd-shim
15:56:27 #29 141.2 + bin/containerd-shim-runc-v1
15:56:31 #29 146.3 + bin/containerd-shim-runc-v2
15:56:31 #29 146.9 + binaries
15:56:31 #29 146.9 + install -D bin/containerd /build/containerd
15:56:31 #29 146.9 + install -D bin/containerd-shim /build/containerd-shim
15:56:31 #29 146.9 + install -D bin/containerd-shim-runc-v2 /build/containerd-shim-runc-v2
15:56:31 #29 147.0 + install -D bin/ctr /build/ctr
15:56:31 #29 DONE 147.3s
15:56:33 
15:56:33 #30 [binary-base 3/7] COPY --from=containerd  /build/ /usr/local/bin/
15:56:33 #30 sha256:562e27f9a2fa88da9f5f580ea053a02de85390ec8828a4f86a676557856b0e2f
15:56:33 #30 DONE 0.2s
15:56:33 
15:56:33 #34 [binary-base 4/7] COPY --from=rootlesskit /build/ /usr/local/bin/
15:56:33 #34 sha256:9e41d861dbf188bceb48427b5cb449910f9132fc38ab57f3b94aa052be72a896
15:56:33 #34 DONE 0.1s
15:56:33 
15:56:33 #36 [binary-base 5/7] COPY --from=proxy       /build/ /usr/local/bin/
15:56:33 #36 sha256:f2d59e57692d413419c8ea703dd664426771b351d35368d688ced9079ff3bb9f
15:56:33 #36 DONE 0.1s
15:56:33 
15:56:33 #41 [binary-base 6/7] COPY --from=vpnkit      /build/ /usr/local/bin/
15:56:33 #41 sha256:aee6467b53ca609c1954e0172937b2906b7c8c080e76b516074fd3cb2c09f8dd
15:56:33 #41 DONE 0.5s
15:56:33 
15:56:33 #42 [binary-base 7/7] WORKDIR /go/src/github.com/docker/docker
15:56:33 #42 sha256:5a52bb7b06db6cfbf0e69341cfd0f12b7b9148a816871185117f12eb5b962e45
15:56:33 #42 DONE 0.0s
15:56:33 
15:56:33 #43 [build-cross 1/1] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=bind,target=/go/src/github.com/docker/docker     --mount=type=tmpfs,target=/go/src/github.com/docker/docker/autogen         hack/make.sh cross
15:56:33 #43 sha256:d954fe41dca2d4c9fa6599f545da4c0a120b6a9d5e8ac0cca1ee81dea7b79d03
15:56:34 #43 0.354 
15:56:34 #43 0.419 Removing /build/bundles/
15:56:34 #43 0.420 
15:56:34 #43 0.426 ---> Making bundle: cross (in /build/bundles/cross)
15:56:34 #43 0.426 Cross building: /build/bundles/cross/windows/amd64
15:56:34 #43 0.493 Building: /build/bundles/cross/windows/amd64/dockerd-0.0.0-20220214173007-96f2cf8.exe
15:56:34 #43 0.493 GOOS="windows" GOARCH="amd64" GOARM=""
15:57:55 #43 81.03 Created binary: /build/bundles/cross/windows/amd64/dockerd-0.0.0-20220214173007-96f2cf8.exe
15:57:55 #43 81.46 Cloning into '/go/src/github.com/docker/windows-container-utility'...
15:57:55 #43 81.67 Building: /build/bundles/cross/windows/amd64/containerutility.exe
15:58:00 #43 86.37 
15:58:00 #43 DONE 86.8s
15:58:00 
15:58:00 #44 [cross 1/1] COPY --from=build-cross /build/bundles/ /
15:58:00 #44 sha256:9344a2069c0259c1b3fa07c8dde2e06299c2d1ae168403becf780e4bf425edc3
15:58:01 #44 DONE 0.2s
15:58:01 
15:58:01 #45 exporting to client
15:58:01 #45 sha256:b60a1292d407630dbb741f28ab6ea4ce3cca872ac28eeee56f4e66a182eca4bc
15:58:01 #45 copying files 17.74MB 0.1s
15:58:01 #45 copying files 58.77MB 0.3s done
15:58:01 #45 DONE 0.3s
15:58:01 make[2]: Leaving directory '/home/ubuntu/workspace/docker-ce-packaging_PR-630/src/github.com/docker/docker'
15:58:01 mkdir -p build/win/amd64/docker/cli-plugins
15:58:01 GOOS=windows GOARCH=amd64 docker run --rm -e GOOS -e GOARCH -v "/home/ubuntu/workspace/docker-ce-packaging_PR-630/static/build/win/amd64/docker/cli-plugins":/out -v "/home/ubuntu/workspace/docker-ce-packaging_PR-630/static/../plugins":/plugins:ro -v "/home/ubuntu/workspace/docker-ce-packaging_PR-630/static/scripts/build-cli-plugins":/build:ro golang:1.16.14 /build
15:58:01 Unable to find image 'golang:1.16.14' locally
15:58:01 1.16.14: Pulling from library/golang
15:58:01 0c6b8ff8c37e: Already exists
15:58:01 412caad352a3: Already exists
15:58:01 e6d3e61f7a50: Already exists
15:58:01 461bb1d8c517: Already exists
15:58:01 9297634c9537: Already exists
15:58:01 2774f9298111: Pulling fs layer
15:58:01 a09180c4e2ac: Pulling fs layer
15:58:01 a09180c4e2ac: Download complete
15:58:02 2774f9298111: Download complete
15:58:08 2774f9298111: Pull complete
15:58:08 a09180c4e2ac: Pull complete
15:58:08 Digest: sha256:496b24974b993f5e57cf9caafc17079a1470c2ed322e5add3fa5be0f8c03c3e8
15:58:08 Status: Downloaded newer image for golang:1.16.14
15:58:09 Cloning into '/go/src/github.com/docker/app'...
15:58:11 Fetching origin
15:58:12 go build -tags= -ldflags="-s -w -X github.com/docker/app/internal.GitCommit=9d2c67f8 -X github.com/docker/app/internal.Version=v0.9.1-beta3" -o bin/docker-app ./cmd/docker-app
15:59:20 Cloning into '/go/src/github.com/docker/buildx'...
15:59:21 Fetching origin
15:59:22 + GO111MODULE=on
15:59:22 + go build -mod=vendor -o bin/docker-buildx -ldflags '-X github.com/docker/buildx/version.Version=v0.7.1-docker -X github.com/docker/buildx/version.Revision=05846896d149da05f3d6fd1e7770da187b52a247 -X github.com/docker/buildx/version.Package=github.com/docker/buildx' ./cmd/buildx
16:00:59 docker run --rm -v /home/ubuntu/workspace/docker-ce-packaging_PR-630/static:/v -w /v alpine chown -R 1000:1000 build/win/amd64
16:00:59 find build/win/amd64/docker -type f -not -name "*.exe" -exec mv {} {}.exe \;
16:00:59 cd /home/ubuntu/workspace/docker-ce-packaging_PR-630/src/github.com/docker/cli && VERSION=0.0.0-20220214173007-96f2cf8 docker buildx bake --set binary.platform=windows/amd64 binary
16:00:59 #1 [internal] load build definition from Dockerfile
16:00:59 #1 transferring dockerfile: 2.08kB 0.1s done
16:00:59 #1 DONE 0.1s
16:00:59 
16:00:59 #2 [internal] load .dockerignore
16:00:59 #2 transferring context: 112B 0.1s done
16:00:59 #2 DONE 0.1s
16:00:59 
16:00:59 #4 [auth] docker/dockerfile:pull token for registry-1.docker.io
16:00:59 #4 DONE 0.0s
16:00:59 
16:00:59 #3 resolve image config for docker.io/docker/dockerfile:1.3
16:00:59 #3 DONE 0.3s
16:00:59 
16:00:59 #5 docker-image://docker.io/docker/dockerfile:1.3@sha256:42399d4635eddd7a9b8a24be879d2f9a930d0ed040a61324cfdf59ef1357b3b2
16:00:59 #5 CACHED
16:00:59 
16:00:59 #6 [internal] load build definition from Dockerfile
16:00:59 #6 DONE 0.0s
16:00:59 
16:00:59 #7 [internal] load .dockerignore
16:00:59 #7 DONE 0.0s
16:00:59 
16:00:59 #11 [auth] library/golang:pull token for registry-1.docker.io
16:00:59 #11 DONE 0.0s
16:00:59 
16:00:59 #12 [auth] tonistiigi/xx:pull token for registry-1.docker.io
16:00:59 #12 DONE 0.0s
16:00:59 
16:00:59 #13 [auth] dockercore/golang-cross:pull token for registry-1.docker.io
16:00:59 #13 DONE 0.0s
16:00:59 
16:00:59 #10 [internal] load metadata for docker.io/dockercore/golang-cross:xx-sdk-extras
16:00:59 #10 DONE 0.1s
16:00:59 
16:00:59 #8 [internal] load metadata for docker.io/library/golang:1.16.12-alpine
16:00:59 #8 DONE 0.1s
16:00:59 
16:00:59 #9 [internal] load metadata for docker.io/tonistiigi/xx:1.0.0-rc.2
16:00:59 #9 DONE 0.1s
16:00:59 
16:00:59 #15 [xx 1/1] FROM docker.io/tonistiigi/xx:1.0.0-rc.2@sha256:09ce682450112501b35936c5db39ddfe87f89731af39c06fb3105080167c0669
16:00:59 #15 DONE 0.0s
16:00:59 
16:00:59 #14 [gostable 1/1] FROM docker.io/library/golang:1.16.12-alpine@sha256:41610aabe4ee677934b08685f7ffbeaa89166ed30df9da3f569d1e63789e1992
16:00:59 #14 DONE 0.0s
16:00:59 
16:00:59 #21 FROM docker.io/dockercore/golang-cross:xx-sdk-extras@sha256:9ac9641111aeb58ce39b1e7423f80dd08af0e05d1c9fa38725f6ee37a1573b41
16:00:59 #21 DONE 0.0s
16:00:59 
16:00:59 #20 [internal] load build context
16:00:59 #20 transferring context: 49.84MB 1.9s done
16:00:59 #20 DONE 2.0s
16:00:59 
16:00:59 #21 FROM docker.io/dockercore/golang-cross:xx-sdk-extras@sha256:9ac9641111aeb58ce39b1e7423f80dd08af0e05d1c9fa38725f6ee37a1573b41
16:00:59 #21 CACHED
16:00:59 
16:00:59 #16 [build-base-alpine 1/3] COPY --from=xx / /
16:00:59 #16 CACHED
16:00:59 
16:00:59 #17 [build-base-alpine 2/3] RUN apk add --no-cache clang lld llvm file git
16:00:59 #17 CACHED
16:00:59 
16:00:59 #18 [build-base-alpine 3/3] WORKDIR /go/src/github.com/docker/cli
16:00:59 #18 CACHED
16:00:59 
16:00:59 #19 [build-alpine 1/1] RUN xx-apk add --no-cache musl-dev gcc
16:00:59 #19 CACHED
16:00:59 
16:00:59 #22 [build 1/1] RUN --mount=ro --mount=type=cache,target=/root/.cache     --mount=from=dockercore/golang-cross:xx-sdk-extras,target=/xx-sdk,src=/xx-sdk     --mount=type=tmpfs,target=cli/winresources     xx-go --wrap &&     TARGET=/out ./scripts/build/binary &&     xx-verify $([ "static" = "static" ] && echo "--static") /out/docker
16:00:59 #22 0.623 Building static docker-windows-amd64.exe
16:01:01 #22 DONE 5.7s
16:01:02 
16:01:02 #23 [binary 1/1] COPY --from=build /out .
16:01:02 #23 DONE 0.1s
16:01:02 
16:01:02 #24 exporting to client
16:01:02 #24 copying files 16.19MB 0.1s
16:01:02 #24 copying files 51.75MB 0.3s done
16:01:02 #24 DONE 0.3s
16:01:02 mkdir -p build/win/amd64/docker
16:01:02 cp /home/ubuntu/workspace/docker-ce-packaging_PR-630/src/github.com/docker/cli/build/docker-windows-amd64.exe build/win/amd64/docker/docker.exe
16:01:02 cp /home/ubuntu/workspace/docker-ce-packaging_PR-630/src/github.com/docker/docker/bundles/cross/windows/amd64/dockerd-0.0.0-20220214173007-96f2cf8.exe build/win/amd64/docker/dockerd.exe
16:01:02 docker run --rm -v /home/ubuntu/workspace/docker-ce-packaging_PR-630/static/build/win/amd64:/v -w /v alpine sh -c 'apk update&&apk add zip&&zip -r docker-0.0.0-20220214173007-96f2cf8.zip docker'
16:01:03 fetch https://dl-cdn.alpinelinux.org/alpine/v3.15/main/x86_64/APKINDEX.tar.gz
16:01:04 fetch https://dl-cdn.alpinelinux.org/alpine/v3.15/community/x86_64/APKINDEX.tar.gz
16:01:04 v3.15.0-282-g323523f173 [https://dl-cdn.alpinelinux.org/alpine/v3.15/main]
16:01:04 v3.15.0-283-g26a4fc70a6 [https://dl-cdn.alpinelinux.org/alpine/v3.15/community]
16:01:04 OK: 15857 distinct packages available
16:01:04 (1/2) Installing unzip (6.0-r9)
16:01:06 (2/2) Installing zip (3.0-r9)
16:01:06 Executing busybox-1.34.1-r3.trigger
16:01:06 OK: 6 MiB in 16 packages
16:01:06   adding: docker/ (stored 0%)
16:01:09   adding: docker/dockerd.exe (deflated 72%)
16:01:09   adding: docker/cli-plugins/ (stored 0%)
16:01:11   adding: docker/cli-plugins/docker-app.exe (deflated 69%)
16:01:14   adding: docker/cli-plugins/docker-buildx.exe (deflated 59%)
16:01:17   adding: docker/docker.exe (deflated 73%)
16:01:17 docker run --rm -v /home/ubuntu/workspace/docker-ce-packaging_PR-630/static:/v -w /v alpine chown -R 1000:1000 build
16:01:17 make[1]: Leaving directory '/home/ubuntu/workspace/docker-ce-packaging_PR-630/static'