Status
Console Output
Skipping 258 KB.. Full Log
9+Xrp1RRGDFNSy5Py84vycVD1nCI1qPENFAZBuqo1dHgJ0Hx/IFD2QKXpgU7qfTDjTr3yfiYHRi4G1LDGnNBVorgBCkV9pblJqUduaqbLcUx50Q00DAu7ujQDYzZbQ8gAAAA==[0m#15 14.32   libseccomp2
12:11:05 #15 14.60 1 upgraded, 25 newly installed, 0 to remove and 0 not upgraded.
12:11:05 #15 14.60 Need to get 77.8 MB of archives.
12:11:05 #15 14.60 After this operation, 487 MB of additional disk space will be used.
12:11:05 #15 14.60 Get:1 http://deb.debian.org/debian buster-backports/main amd64 libseccomp2 amd64 2.5.1-1~bpo10+1 [47.7 kB]
12:11:05 #15 14.60 Get:2 http://deb.debian.org/debian buster/main amd64 binutils-mingw-w64-i686 amd64 2.31.1-11+8.3 [2310 kB]
12:11:05 #15 14.69 Get:3 http://deb.debian.org/debian buster/main amd64 binutils-mingw-w64-x86-64 amd64 2.31.1-11+8.3 [2642 kB]
12:11:05 #15 14.79 Get:4 http://deb.debian.org/debian buster/main amd64 binutils-mingw-w64 all 2.31.1-11+8.3 [138 kB]
12:11:05 #15 14.79 Get:5 http://deb.debian.org/debian buster/main amd64 libdevmapper1.02.1 amd64 2:1.02.155-3 [141 kB]
12:11:05 #15 14.80 Get:6 http://deb.debian.org/debian buster/main amd64 dmsetup amd64 2:1.02.155-3 [90.8 kB]
12:11:05 #15 14.80 Get:7 http://deb.debian.org/debian buster/main amd64 mingw-w64-common all 6.0.0-3 [4910 kB]
12:11:05 #15 14.97 Get:8 http://deb.debian.org/debian buster/main amd64 mingw-w64-x86-64-dev all 6.0.0-3 [3454 kB]
12:11:05 #15 15.08 Get:9 http://deb.debian.org/debian buster/main amd64 gcc-mingw-w64-base amd64 8.3.0-6+21.3~deb10u2 [175 kB]
12:11:05 #15 15.09 Get:10 http://deb.debian.org/debian buster/main amd64 gcc-mingw-w64-x86-64 amd64 8.3.0-6+21.3~deb10u2 [35.8 MB]
12:11:05 #15 16.44 Get:11 http://deb.debian.org/debian buster/main amd64 g++-mingw-w64-x86-64 amd64 8.3.0-6+21.3~deb10u2 [25.3 MB]
12:11:05 #15 17.19 Get:12 http://deb.debian.org/debian buster/main amd64 libapparmor1 amd64 2.13.2-10 [94.7 kB]
12:11:05 #15 17.19 Get:13 http://deb.debian.org/debian buster/main amd64 libapparmor-dev amd64 2.13.2-10 [136 kB]
12:11:05 #15 17.20 Get:14 http://deb.debian.org/debian buster/main amd64 libbtrfs0 amd64 4.20.1-2 [42.0 kB]
12:11:05 #15 17.20 Get:15 http://deb.debian.org/debian buster/main amd64 libbtrfs-dev amd64 4.20.1-2 [77.1 kB]
12:11:05 #15 17.20 Get:16 http://deb.debian.org/debian buster/main amd64 libdevmapper-event1.02.1 amd64 2:1.02.155-3 [22.6 kB]
12:11:05 #15 17.21 Get:17 http://deb.debian.org/debian buster/main amd64 libudev-dev amd64 241-7~deb10u8 [110 kB]
12:11:05 #15 17.21 Get:18 http://deb.debian.org/debian buster/main amd64 libsepol1-dev amd64 2.8-1 [338 kB]
12:11:05 #15 17.22 Get:19 http://deb.debian.org/debian buster/main amd64 libpcre16-3 amd64 2:8.39-12 [259 kB]
12:11:05 #15 17.23 Get:20 http://deb.debian.org/debian buster/main amd64 libpcre32-3 amd64 2:8.39-12 [250 kB]
12:11:05 #15 17.23 Get:21 http://deb.debian.org/debian buster/main amd64 libpcrecpp0v5 amd64 2:8.39-12 [152 kB]
12:11:05 #15 17.24 Get:22 http://deb.debian.org/debian buster/main amd64 libpcre3-dev amd64 2:8.39-12 [650 kB]
12:11:05 #15 17.26 Get:23 http://deb.debian.org/debian buster/main amd64 libselinux1-dev amd64 2.8-1+b1 [169 kB]
12:11:05 #15 17.26 Get:24 http://deb.debian.org/debian buster/main amd64 libdevmapper-dev amd64 2:1.02.155-3 [51.4 kB]
12:11:05 #15 17.26 Get:25 http://deb.debian.org/debian buster-backports/main amd64 libseccomp-dev amd64 2.5.1-1~bpo10+1 [90.3 kB]
12:11:05 #15 17.27 Get:26 http://deb.debian.org/debian buster/main amd64 libsystemd-dev amd64 241-7~deb10u8 [322 kB]
12:11:05 #15 17.58 debconf: delaying package configuration, since apt-utils is not installed
12:11:05 #15 17.66 Fetched 77.8 MB in 3s (26.6 MB/s)
12:11:05 #15 17.71 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 15421 files and directories currently installed.)
12:11:05 #15 17.78 Preparing to unpack .../libseccomp2_2.5.1-1~bpo10+1_amd64.deb ...
12:11:05 #15 17.81 Unpacking libseccomp2:amd64 (2.5.1-1~bpo10+1) over (2.3.3-4) ...
12:11:05 #15 17.92 Setting up libseccomp2:amd64 (2.5.1-1~bpo10+1) ...
12:11:05 #15 18.02 Selecting previously unselected package binutils-mingw-w64-i686.
12:11:05 #15 18.02 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 15421 files and directories currently installed.)
12:11:05 #15 18.05 Preparing to unpack .../00-binutils-mingw-w64-i686_2.31.1-11+8.3_amd64.deb ...
12:11:05 #15 18.06 Unpacking binutils-mingw-w64-i686 (2.31.1-11+8.3) ...
12:11:05 #15 18.93 Selecting previously unselected package binutils-mingw-w64-x86-64.
12:11:05 #15 18.93 Preparing to unpack .../01-binutils-mingw-w64-x86-64_2.31.1-11+8.3_amd64.deb ...
12:11:05 #15 18.94 Unpacking binutils-mingw-w64-x86-64 (2.31.1-11+8.3) ...
12:11:05 #15 19.96 Selecting previously unselected package binutils-mingw-w64.
12:11:05 #15 19.96 Preparing to unpack .../02-binutils-mingw-w64_2.31.1-11+8.3_all.deb ...
12:11:05 #15 19.98 Unpacking binutils-mingw-w64 (2.31.1-11+8.3) ...
12:11:05 #15 20.05 Selecting previously unselected package libdevmapper1.02.1:amd64.
12:11:05 #15 20.05 Preparing to unpack .../03-libdevmapper1.02.1_2%3a1.02.155-3_amd64.deb ...
12:11:05 #15 20.06 Unpacking libdevmapper1.02.1:amd64 (2:1.02.155-3) ...
12:11:05 #15 20.15 Selecting previously unselected package dmsetup.
12:11:05 #15 20.15 Preparing to unpack .../04-dmsetup_2%3a1.02.155-3_amd64.deb ...
12:11:05 #15 20.16 Unpacking dmsetup (2:1.02.155-3) ...
12:11:05 #15 20.24 Selecting previously unselected package mingw-w64-common.
12:11:05 #15 20.25 Preparing to unpack .../05-mingw-w64-common_6.0.0-3_all.deb ...
12:11:05 #15 20.25 Unpacking mingw-w64-common (6.0.0-3) ...
12:11:05 #15 ...
12:11:05 
12:11:05 #16 [tini 1/2] RUN --mount=type=cache,sharing=locked,id=moby-tini-aptlib,target=/var/lib/apt     --mount=type=cache,sharing=locked,id=moby-tini-aptcache,target=/var/cache/apt         apt-get update && apt-get install -y --no-install-recommends             cmake             vim-common
12:11:05 #16 sha256:7679a141ac2b7e90d1d60ecbfc7652bc9cb12f72b12e1e5d3dd6d424569933e8
12:11:05 #16 22.00 Setting up libicu63:amd64 (63.1-6+deb10u3) ...
12:11:05 #16 22.02 Setting up xxd (2:8.1.0875-5+deb10u2) ...
12:11:05 #16 22.04 Setting up libuv1:amd64 (1.24.1-1+deb10u1) ...
12:11:05 #16 22.05 Setting up vim-common (2:8.1.0875-5+deb10u2) ...
12:11:05 #16 22.08 Setting up librhash0:amd64 (1.3.8-1) ...
12:11:06 #16 22.09 Setting up cmake-data (3.13.4-1) ...
12:11:06 #16 22.11 Setting up libxml2:amd64 (2.9.4+dfsg1-7+deb10u4) ...
12:11:06 #16 22.12 Setting up libjsoncpp1:amd64 (1.7.4-3) ...
12:11:06 #16 22.13 Setting up libarchive13:amd64 (3.3.3-4+deb10u1) ...
12:11:06 #16 22.14 Setting up cmake (3.13.4-1) ...
12:11:06 #16 22.16 Processing triggers for libc-bin (2.28-10+deb10u1) ...
12:11:06 #16 22.23 Processing triggers for mime-support (3.62) ...
12:11:06 #16 DONE 22.7s
12:11:06 
12:11:06 #18 [tini 2/2] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh tini
12:11:06 #18 sha256:e6ef55535b5c1e2f4d2249cd1a75177fa52f1e1780368a7b2242e6ccccdbbd43
12:11:07 #18 1.069 + RM_GOPATH=0
12:11:07 #18 1.069 + TMP_GOPATH=
12:11:07 #18 1.069 + : /build
12:11:07 #18 1.069 + '[' -z '' ']'
12:11:07 #18 1.069 ++ mktemp -d
12:11:07 #18 1.071 + export GOPATH=/tmp/tmp.meOtrEzBFJ
12:11:07 #18 1.071 + GOPATH=/tmp/tmp.meOtrEzBFJ
12:11:07 #18 1.071 + RM_GOPATH=1
12:11:07 #18 1.072 + case "$(go env GOARCH)" in
12:11:07 #18 1.072 ++ go env GOARCH
12:11:07 #18 1.086 + export GO_BUILDMODE=-buildmode=pie
12:11:07 #18 1.086 + GO_BUILDMODE=-buildmode=pie
12:11:07 #18 1.087 ++ dirname /tmp/install/install.sh
12:11:07 #18 1.090 + dir=/tmp/install
12:11:07 #18 1.090 + bin=tini
12:11:07 #18 1.091 + shift
12:11:07 #18 1.091 + '[' '!' -f /tmp/install/tini.installer ']'
12:11:07 #18 1.093 + . /tmp/install/tini.installer
12:11:07 #18 1.093 ++ : v0.19.0
12:11:07 #18 1.093 + install_tini
12:11:07 #18 1.093 + echo 'Install tini version v0.19.0'
12:11:07 #18 1.094 Install tini version v0.19.0
12:11:07 #18 1.094 + git clone https://github.com/krallin/tini.git /tmp/tmp.meOtrEzBFJ/tini
12:11:07 #18 1.097 Cloning into '/tmp/tmp.meOtrEzBFJ/tini'...
12:11:08 #18 1.482 + cd /tmp/tmp.meOtrEzBFJ/tini
12:11:08 #18 1.482 + git checkout -q v0.19.0
12:11:08 #18 1.503 + cmake .
12:11:08 #18 1.688 -- The C compiler identification is GNU 8.3.0
12:11:08 #18 1.714 -- Check for working C compiler: /usr/bin/cc
12:11:08 #18 2.011 -- Check for working C compiler: /usr/bin/cc -- works
12:11:08 #18 2.014 -- Detecting C compiler ABI info
12:11:08 #18 2.348 -- Detecting C compiler ABI info - done
12:11:08 #18 2.366 -- Detecting C compile features
12:11:09 #18 3.245 -- Detecting C compile features - done
12:11:09 #18 3.281 -- Performing Test HAS_BUILTIN_FORTIFY
12:11:10 #18 3.407 -- Performing Test HAS_BUILTIN_FORTIFY - Failed
12:11:10 #18 3.462 -- Configuring done
12:11:10 #18 3.486 -- Generating done
12:11:10 #18 3.488 -- Build files have been written to: /tmp/tmp.meOtrEzBFJ/tini
12:11:10 #18 3.491 + make tini-static
12:11:10 #18 3.617 Scanning dependencies of target tini-static
12:11:10 #18 3.646 [ 50%] Building C object CMakeFiles/tini-static.dir/src/tini.c.o
12:11:10 #18 4.193 [100%] Linking C executable tini-static
12:11:11 #18 4.396 [100%] Built target tini-static
12:11:11 #18 4.430 + mkdir -p /build
12:11:11 #18 4.432 + cp tini-static /build/docker-init
12:11:11 #18 DONE 4.8s
12:11:11 
12:11:11 #15 [runtime-dev-cross-false 2/2] RUN --mount=type=cache,sharing=locked,id=moby-cross-false-aptlib,target=/var/lib/apt     --mount=type=cache,sharing=locked,id=moby-cross-false-aptcache,target=/var/cache/apt         apt-get update && apt-get install -y --no-install-recommends             binutils-mingw-w64             g++-mingw-w64-x86-64             libapparmor-dev             libbtrfs-dev             libdevmapper-dev             libseccomp-dev/buster-backports             libsystemd-dev             libudev-dev
12:11:11 #15 sha256:a5b7678be5005990830cddaa005a29af45d55b080d82ecc50b64b3d1b486d253
12:11:11 #15 22.55 Selecting previously unselected package mingw-w64-x86-64-dev.
12:11:11 #15 22.56 Preparing to unpack .../06-mingw-w64-x86-64-dev_6.0.0-3_all.deb ...
12:11:11 #15 22.57 Unpacking mingw-w64-x86-64-dev (6.0.0-3) ...
12:11:11 #15 24.90 Selecting previously unselected package gcc-mingw-w64-base.
12:11:11 #15 24.91 Preparing to unpack .../07-gcc-mingw-w64-base_8.3.0-6+21.3~deb10u2_amd64.deb ...
12:11:11 #15 24.92 Unpacking gcc-mingw-w64-base (8.3.0-6+21.3~deb10u2) ...
12:11:11 #15 25.03 Selecting previously unselected package gcc-mingw-w64-x86-64.
12:11:11 #15 25.04 Preparing to unpack .../08-gcc-mingw-w64-x86-64_8.3.0-6+21.3~deb10u2_amd64.deb ...
12:11:11 #15 25.04 Unpacking gcc-mingw-w64-x86-64 (8.3.0-6+21.3~deb10u2) ...
12:11:19 #15 33.30 Selecting previously unselected package g++-mingw-w64-x86-64.
12:11:19 #15 33.30 Preparing to unpack .../09-g++-mingw-w64-x86-64_8.3.0-6+21.3~deb10u2_amd64.deb ...
12:11:19 #15 33.30 Unpacking g++-mingw-w64-x86-64 (8.3.0-6+21.3~deb10u2) ...
12:11:20 #15 ...
12:11:20 
12:11:20 #23 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh containerd
12:11:20 #23 sha256:04294ebba46b71607cc2150f5251d46ca2e5c86ba984305a407a609e24380203
12:11:20 #23 21.20 Checking out files:  98% (4844/4925)   
Checking out files:  99% (4876/4925)   
Checking out files: 100% (4925/4925)   
Checking out files: 100% (4925/4925), done.
12:11:20 #23 21.26 + cd /tmp/tmp.93DmBnMPfY/src/github.com/containerd/containerd
12:11:20 #23 21.26 + git checkout -q v1.6.7
12:11:20 #23 21.86 + export 'BUILDTAGS=netgo osusergo static_build'
12:11:20 #23 21.86 + BUILDTAGS='netgo osusergo static_build'
12:11:21 #23 21.86 + export EXTRA_FLAGS=-buildmode=pie
12:11:21 #23 21.86 + EXTRA_FLAGS=-buildmode=pie
12:11:21 #23 21.86 + export 'EXTRA_LDFLAGS=-extldflags "-fno-PIC -static"'
12:11:21 #23 21.86 + EXTRA_LDFLAGS='-extldflags "-fno-PIC -static"'
12:11:21 #23 21.86 + '[' '' = dynamic ']'
12:11:21 #23 21.86 + make
12:11:21 #23 22.69 + bin/ctr
12:11:25 #23 ...
12:11:25 
12:11:25 #25 [rootlesskit 1/3] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh rootlesskit
12:11:25 #25 sha256:f84d907342ab1c7d4a38f53bf7095563db00f3ecabcc0520599924869193cc88
12:11:25 #25 41.38 + for f in rootlesskit rootlesskit-docker-proxy
12:11:25 #25 41.38 + GOBIN=/build
12:11:25 #25 41.38 + GO111MODULE=on
12:11:25 #25 41.38 + go install -ldflags= github.com/rootless-containers/rootlesskit/cmd/rootlesskit-docker-proxy@v0.14.4
12:11:27 #25 DONE 43.6s
12:11:27 
12:11:27 #15 [runtime-dev-cross-false 2/2] RUN --mount=type=cache,sharing=locked,id=moby-cross-false-aptlib,target=/var/lib/apt     --mount=type=cache,sharing=locked,id=moby-cross-false-aptcache,target=/var/cache/apt         apt-get update && apt-get install -y --no-install-recommends             binutils-mingw-w64             g++-mingw-w64-x86-64             libapparmor-dev             libbtrfs-dev             libdevmapper-dev             libseccomp-dev/buster-backports             libsystemd-dev             libudev-dev
12:11:27 #15 sha256:a5b7678be5005990830cddaa005a29af45d55b080d82ecc50b64b3d1b486d253
12:11:27 #15 39.19 Selecting previously unselected package libapparmor1:amd64.
12:11:27 #15 39.20 Preparing to unpack .../10-libapparmor1_2.13.2-10_amd64.deb ...
12:11:27 #15 39.20 Unpacking libapparmor1:amd64 (2.13.2-10) ...
12:11:27 #15 39.26 Selecting previously unselected package libapparmor-dev:amd64.
12:11:27 #15 39.26 Preparing to unpack .../11-libapparmor-dev_2.13.2-10_amd64.deb ...
12:11:27 #15 39.27 Unpacking libapparmor-dev:amd64 (2.13.2-10) ...
12:11:27 #15 39.35 Selecting previously unselected package libbtrfs0.
12:11:27 #15 39.35 Preparing to unpack .../12-libbtrfs0_4.20.1-2_amd64.deb ...
12:11:27 #15 39.35 Unpacking libbtrfs0 (4.20.1-2) ...
12:11:27 #15 39.40 Selecting previously unselected package libbtrfs-dev.
12:11:27 #15 39.40 Preparing to unpack .../13-libbtrfs-dev_4.20.1-2_amd64.deb ...
12:11:27 #15 39.41 Unpacking libbtrfs-dev (4.20.1-2) ...
12:11:27 #15 39.47 Selecting previously unselected package libdevmapper-event1.02.1:amd64.
12:11:27 #15 39.48 Preparing to unpack .../14-libdevmapper-event1.02.1_2%3a1.02.155-3_amd64.deb ...
12:11:27 #15 39.49 Unpacking libdevmapper-event1.02.1:amd64 (2:1.02.155-3) ...
12:11:27 #15 39.53 Selecting previously unselected package libudev-dev:amd64.
12:11:27 #15 39.53 Preparing to unpack .../15-libudev-dev_241-7~deb10u8_amd64.deb ...
12:11:27 #15 39.55 Unpacking libudev-dev:amd64 (241-7~deb10u8) ...
12:11:27 #15 39.65 Selecting previously unselected package libsepol1-dev:amd64.
12:11:27 #15 39.66 Preparing to unpack .../16-libsepol1-dev_2.8-1_amd64.deb ...
12:11:27 #15 39.66 Unpacking libsepol1-dev:amd64 (2.8-1) ...
12:11:27 #15 39.81 Selecting previously unselected package libpcre16-3:amd64.
12:11:27 #15 39.82 Preparing to unpack .../17-libpcre16-3_2%3a8.39-12_amd64.deb ...
12:11:27 #15 39.82 Unpacking libpcre16-3:amd64 (2:8.39-12) ...
12:11:27 #15 39.91 Selecting previously unselected package libpcre32-3:amd64.
12:11:27 #15 39.92 Preparing to unpack .../18-libpcre32-3_2%3a8.39-12_amd64.deb ...
12:11:27 #15 39.93 Unpacking libpcre32-3:amd64 (2:8.39-12) ...
12:11:27 #15 40.01 Selecting previously unselected package libpcrecpp0v5:amd64.
12:11:27 #15 40.02 Preparing to unpack .../19-libpcrecpp0v5_2%3a8.39-12_amd64.deb ...
12:11:27 #15 40.03 Unpacking libpcrecpp0v5:amd64 (2:8.39-12) ...
12:11:27 #15 40.07 Selecting previously unselected package libpcre3-dev:amd64.
12:11:27 #15 40.08 Preparing to unpack .../20-libpcre3-dev_2%3a8.39-12_amd64.deb ...
12:11:27 #15 40.09 Unpacking libpcre3-dev:amd64 (2:8.39-12) ...
12:11:27 #15 40.25 Selecting previously unselected package libselinux1-dev:amd64.
12:11:27 #15 40.27 Preparing to unpack .../21-libselinux1-dev_2.8-1+b1_amd64.deb ...
12:11:27 #15 40.27 Unpacking libselinux1-dev:amd64 (2.8-1+b1) ...
12:11:27 #15 40.38 Selecting previously unselected package libdevmapper-dev:amd64.
12:11:27 #15 40.39 Preparing to unpack .../22-libdevmapper-dev_2%3a1.02.155-3_amd64.deb ...
12:11:27 #15 40.39 Unpacking libdevmapper-dev:amd64 (2:1.02.155-3) ...
12:11:27 #15 40.45 Selecting previously unselected package libseccomp-dev:amd64.
12:11:27 #15 40.46 Preparing to unpack .../23-libseccomp-dev_2.5.1-1~bpo10+1_amd64.deb ...
12:11:27 #15 40.46 Unpacking libseccomp-dev:amd64 (2.5.1-1~bpo10+1) ...
12:11:27 #15 40.53 Selecting previously unselected package libsystemd-dev:amd64.
12:11:27 #15 40.54 Preparing to unpack .../24-libsystemd-dev_241-7~deb10u8_amd64.deb ...
12:11:27 #15 40.55 Unpacking libsystemd-dev:amd64 (241-7~deb10u8) ...
12:11:27 #15 40.80 Setting up libpcrecpp0v5:amd64 (2:8.39-12) ...
12:11:27 #15 40.82 Setting up libseccomp-dev:amd64 (2.5.1-1~bpo10+1) ...
12:11:27 #15 40.82 Setting up libapparmor1:amd64 (2.13.2-10) ...
12:11:27 #15 40.83 Setting up binutils-mingw-w64-x86-64 (2.31.1-11+8.3) ...
12:11:27 #15 40.84 Setting up libpcre16-3:amd64 (2:8.39-12) ...
12:11:27 #15 40.86 Setting up libsepol1-dev:amd64 (2.8-1) ...
12:11:27 #15 40.87 Setting up gcc-mingw-w64-base (8.3.0-6+21.3~deb10u2) ...
12:11:27 #15 40.88 Setting up libbtrfs0 (4.20.1-2) ...
12:11:27 #15 40.89 Setting up libpcre32-3:amd64 (2:8.39-12) ...
12:11:27 #15 40.90 Setting up libudev-dev:amd64 (241-7~deb10u8) ...
12:11:27 #15 40.92 Setting up binutils-mingw-w64-i686 (2.31.1-11+8.3) ...
12:11:27 #15 40.93 Setting up libbtrfs-dev (4.20.1-2) ...
12:11:27 #15 40.95 Setting up libapparmor-dev:amd64 (2.13.2-10) ...
12:11:27 #15 40.96 Setting up mingw-w64-common (6.0.0-3) ...
12:11:27 #15 40.97 Setting up libsystemd-dev:amd64 (241-7~deb10u8) ...
12:11:27 #15 40.98 Setting up mingw-w64-x86-64-dev (6.0.0-3) ...
12:11:27 #15 40.99 Setting up libpcre3-dev:amd64 (2:8.39-12) ...
12:11:27 #15 41.00 Setting up gcc-mingw-w64-x86-64 (8.3.0-6+21.3~deb10u2) ...
12:11:27 #15 41.02 update-alternatives: using /usr/bin/x86_64-w64-mingw32-gcc-posix to provide /usr/bin/x86_64-w64-mingw32-gcc (x86_64-w64-mingw32-gcc) in auto mode
12:11:27 #15 41.02 update-alternatives: using /usr/bin/x86_64-w64-mingw32-gcc-win32 to provide /usr/bin/x86_64-w64-mingw32-gcc (x86_64-w64-mingw32-gcc) in auto mode
12:11:27 #15 41.03 Setting up g++-mingw-w64-x86-64 (8.3.0-6+21.3~deb10u2) ...
12:11:27 #15 41.04 update-alternatives: using /usr/bin/x86_64-w64-mingw32-g++-posix to provide /usr/bin/x86_64-w64-mingw32-g++ (x86_64-w64-mingw32-g++) in auto mode
12:11:27 #15 41.04 update-alternatives: using /usr/bin/x86_64-w64-mingw32-g++-win32 to provide /usr/bin/x86_64-w64-mingw32-g++ (x86_64-w64-mingw32-g++) in auto mode
12:11:27 #15 41.05 Setting up binutils-mingw-w64 (2.31.1-11+8.3) ...
12:11:27 #15 41.06 Setting up libselinux1-dev:amd64 (2.8-1+b1) ...
12:11:27 #15 41.07 Setting up libdevmapper1.02.1:amd64 (2:1.02.155-3) ...
12:11:27 #15 41.08 Setting up dmsetup (2:1.02.155-3) ...
12:11:27 #15 41.10 Setting up libdevmapper-event1.02.1:amd64 (2:1.02.155-3) ...
12:11:27 #15 41.11 Setting up libdevmapper-dev:amd64 (2:1.02.155-3) ...
12:11:27 #15 41.12 Processing triggers for libc-bin (2.28-10+deb10u1) ...
12:11:27 #15 DONE 42.2s
12:11:27 
12:11:27 #19 [binary-base 1/7] COPY --from=tini        /build/ /usr/local/bin/
12:11:27 #19 sha256:0bf3896f6d2da2e317b0fbfb9583a14ae000d3039cff8950193fcff839aa6734
12:11:27 #19 ...
12:11:27 
12:11:27 #26 [rootlesskit 2/3] COPY ./contrib/dockerd-rootless.sh /build
12:11:27 #26 sha256:f1ed75dcf156c0ab2b82b14d6e6560b0d880b4d3c9aca5e1dd66e5992cb075b8
12:11:27 #26 DONE 0.2s
12:11:27 
12:11:27 #27 [rootlesskit 3/3] COPY ./contrib/dockerd-rootless-setuptool.sh /build
12:11:27 #27 sha256:88cd5e303b3926aa11fbc51ff9889aab38bb2ed47481143e181d1e1c8cbf3127
12:11:27 #27 DONE 0.1s
12:11:27 
12:11:27 #19 [binary-base 1/7] COPY --from=tini        /build/ /usr/local/bin/
12:11:27 #19 sha256:0bf3896f6d2da2e317b0fbfb9583a14ae000d3039cff8950193fcff839aa6734
12:11:27 #19 DONE 0.3s
12:11:27 
12:11:27 #20 [runc 1/1] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh runc
12:11:27 #20 sha256:ac7f470d0d25bc5327e6ece71affdc20a6e216dc337e096dcbfb0228dcc7976d
12:11:28 #20 1.149 + RM_GOPATH=0
12:11:28 #20 1.149 + TMP_GOPATH=
12:11:28 #20 1.149 + : /build
12:11:28 #20 1.150 + '[' -z '' ']'
12:11:28 #20 1.150 ++ mktemp -d
12:11:28 #20 1.151 + export GOPATH=/tmp/tmp.IGW1xAqoYD
12:11:28 #20 1.152 + GOPATH=/tmp/tmp.IGW1xAqoYD
12:11:28 #20 1.152 + RM_GOPATH=1
12:11:28 #20 1.152 + case "$(go env GOARCH)" in
12:11:28 #20 1.152 ++ go env GOARCH
12:11:28 #20 1.161 + export GO_BUILDMODE=-buildmode=pie
12:11:28 #20 1.161 + GO_BUILDMODE=-buildmode=pie
12:11:28 #20 1.161 ++ dirname /tmp/install/install.sh
12:11:28 #20 1.161 + dir=/tmp/install
12:11:28 #20 1.161 + bin=runc
12:11:28 #20 1.161 + shift
12:11:28 #20 1.162 + '[' '!' -f /tmp/install/runc.installer ']'
12:11:28 #20 1.162 + . /tmp/install/runc.installer
12:11:28 #20 1.162 ++ set -e
12:11:28 #20 1.162 ++ : v1.1.3
12:11:28 #20 1.162 + install_runc
12:11:28 #20 1.163 + RUNC_BUILDTAGS=seccomp
12:11:28 #20 1.163 + echo 'Install runc version v1.1.3 (build tags: seccomp)'
12:11:28 #20 1.163 Install runc version v1.1.3 (build tags: seccomp)
12:11:28 #20 1.163 + git clone https://github.com/opencontainers/runc.git /tmp/tmp.IGW1xAqoYD/src/github.com/opencontainers/runc
12:11:28 #20 1.167 Cloning into '/tmp/tmp.IGW1xAqoYD/src/github.com/opencontainers/runc'...
12:11:32 #20 4.558 + cd /tmp/tmp.IGW1xAqoYD/src/github.com/opencontainers/runc
12:11:32 #20 4.558 + git checkout -q v1.1.3
12:11:32 #20 4.781 + '[' -z '' ']'
12:11:32 #20 4.781 + target=static
12:11:32 #20 4.781 + make BUILDTAGS=seccomp static
12:11:32 #20 4.920 CGO_ENABLED=1 go build -trimpath  -tags "seccomp netgo osusergo" -ldflags "-extldflags -static -X main.gitCommit=v1.1.3-0-g6724737f -X main.version=1.1.3 " -o runc .
12:12:28 #20 61.38 + mkdir -p /build
12:12:29 #20 61.38 + cp runc /build/runc
12:12:29 #20 DONE 62.1s
12:12:29 
12:12:29 #23 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh containerd
12:12:29 #23 sha256:04294ebba46b71607cc2150f5251d46ca2e5c86ba984305a407a609e24380203
12:12:31 #23 ...
12:12:31 
12:12:31 #21 [binary-base 2/7] COPY --from=runc        /build/ /usr/local/bin/
12:12:31 #21 sha256:342aed8c5183b4de6a5136b947ea1272da9b0be61272c1e282110a1163e01c7a
12:12:31 #21 DONE 0.3s
12:12:31 
12:12:31 #23 [containerd 2/2] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=cache,target=/go/pkg/mod     --mount=type=bind,src=hack/dockerfile/install,target=/tmp/install         PREFIX=/build /tmp/install/install.sh containerd
12:12:31 #23 sha256:04294ebba46b71607cc2150f5251d46ca2e5c86ba984305a407a609e24380203
12:12:43 #23 103.9 + bin/containerd
12:13:30 #23 150.0 # github.com/containerd/containerd/cmd/containerd
12:13:30 #23 150.0 /usr/bin/ld: /tmp/go-link-2493651080/000019.o: in function `New':
12:13:30 #23 150.0 /tmp/tmp.93DmBnMPfY/src/github.com/containerd/containerd/vendor/github.com/miekg/pkcs11/pkcs11.go:77: warning: Using 'dlopen' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
12:13:30 #23 150.1 + bin/containerd-stress
12:13:30 #23 151.4 + bin/containerd-shim
12:13:42 #23 161.6 + bin/containerd-shim-runc-v1
12:13:47 #23 167.5 + bin/containerd-shim-runc-v2
12:13:47 #23 168.2 + binaries
12:13:47 #23 168.2 + install -D bin/containerd /build/containerd
12:13:47 #23 168.2 + install -D bin/containerd-shim /build/containerd-shim
12:13:47 #23 168.2 + install -D bin/containerd-shim-runc-v2 /build/containerd-shim-runc-v2
12:13:47 #23 168.2 + install -D bin/ctr /build/ctr
12:13:48 #23 DONE 169.0s
12:13:49 
12:13:49 #24 [binary-base 3/7] COPY --from=containerd  /build/ /usr/local/bin/
12:13:49 #24 sha256:404861e02297aef15935fb5f06d7ddf2f538f3d924c5f98234bf31c7fc3d0209
12:13:49 #24 DONE 0.3s
12:13:49 
12:13:49 #28 [binary-base 4/7] COPY --from=rootlesskit /build/ /usr/local/bin/
12:13:49 #28 sha256:3e4f8b6167bbc8402fba082d042d3e40985d51df42b78b259c5154189c66c934
12:13:49 #28 DONE 0.1s
12:13:49 
12:13:49 #30 [binary-base 5/7] COPY --from=proxy       /build/ /usr/local/bin/
12:13:49 #30 sha256:bf9afd8eb4fe1a272543dd2e086eb203c0b7ba9199352e4989592db4f87cebae
12:13:49 #30 DONE 0.0s
12:13:49 
12:13:49 #35 [binary-base 6/7] COPY --from=vpnkit      /build/ /usr/local/bin/
12:13:49 #35 sha256:03d504a1f508103cb01df0c325d482447a4fa6756b6005d309d78574cab07a9d
12:13:50 #35 DONE 0.5s
12:13:50 
12:13:50 #36 [binary-base 7/7] WORKDIR /go/src/github.com/docker/docker
12:13:50 #36 sha256:c1b95702109ceed7a5a037d6bc5d0f23258ba613c63b548a71ae43c5d864eaca
12:13:50 #36 DONE 0.0s
12:13:50 
12:13:50 #37 [build-binary 1/1] RUN --mount=type=cache,target=/root/.cache/go-build     --mount=type=bind,target=/go/src/github.com/docker/docker         hack/make.sh binary
12:13:50 #37 sha256:a6231b44a0ba46a9ebf23602ae636970dd29fa2bf3cdaaccc16274b6a2a306b0
12:13:50 #37 0.340 
12:13:50 #37 0.401 Removing /build/bundles/
12:13:50 #37 0.402 
12:13:50 #37 0.407 ---> Making bundle: binary (in /build/bundles/binary)
12:13:50 #37 0.436 Building: /build/bundles/binary-daemon/dockerd-0.0.0-20220804091928-715cfc4
12:13:50 #37 0.436 GOOS="" GOARCH="" GOARM=""
12:15:12 #37 74.29 Created binary: /build/bundles/binary-daemon/dockerd-0.0.0-20220804091928-715cfc4
12:15:12 #37 74.74 Copying nested executables into /build/bundles/binary-daemon
12:15:12 #37 76.00 
12:15:12 #37 DONE 76.5s
12:15:12 
12:15:12 #38 [binary 1/1] COPY --from=build-binary /build/bundles/ /
12:15:12 #38 sha256:6237cfdc6ec169b51f8a36a34301ee798d1f6c408256a93e8fc5ee854cedf5f0
12:15:12 #38 DONE 0.4s
12:15:12 
12:15:12 #39 exporting to client
12:15:12 #39 sha256:b60a1292d407630dbb741f28ab6ea4ce3cca872ac28eeee56f4e66a182eca4bc
12:15:12 #39 copying files 20.59MB 0.1s
12:15:12 #39 copying files 210.01MB 1.1s done
12:15:12 #39 DONE 1.1s
12:15:12 make[2]: Leaving directory '/home/ubuntu/workspace/docker-ce-packaging_PR-726/src/github.com/docker/docker'
12:15:12 mkdir -p build/linux/docker
12:15:12 cp /home/ubuntu/workspace/docker-ce-packaging_PR-726/src/github.com/docker/cli/build/docker build/linux/docker/
12:15:12 for f in dockerd containerd ctr containerd-shim containerd-shim-runc-v2 docker-init docker-proxy runc; do \
12:15:12 	cp -L /home/ubuntu/workspace/docker-ce-packaging_PR-726/src/github.com/docker/docker/bundles/binary-daemon/$f build/linux/docker/$f; \
12:15:12 done
12:15:12 tar -C build/linux -c -z -f build/linux/docker-0.0.0-20220804091928-715cfc4.tgz docker
12:15:20 # extra binaries for running rootless
12:15:20 mkdir -p build/linux/docker-rootless-extras
12:15:20 for f in rootlesskit rootlesskit-docker-proxy dockerd-rootless.sh dockerd-rootless-setuptool.sh vpnkit; do \
12:15:20 	if [ -f /home/ubuntu/workspace/docker-ce-packaging_PR-726/src/github.com/docker/docker/bundles/binary-daemon/$f ]; then \
12:15:20 		cp -L /home/ubuntu/workspace/docker-ce-packaging_PR-726/src/github.com/docker/docker/bundles/binary-daemon/$f build/linux/docker-rootless-extras/$f; \
12:15:20 	fi \
12:15:20 done
12:15:20 tar -C build/linux -c -z -f build/linux/docker-rootless-extras-0.0.0-20220804091928-715cfc4.tgz docker-rootless-extras
12:15:21 make[1]: Leaving directory '/home/ubuntu/workspace/docker-ce-packaging_PR-726/static'